Enable IPE policy authors to indicate trust for a singular fsverity
file, identified by the digest information, through "fsverity_digest"
and all files using valid fsverity builtin signatures via
"fsverity_signature".
This enables file-level integrity claims to be expressed in IPE,
allowing individual files to be authorized, giving some flexibility
for policy authors. Such file-level claims are important to be expressed
for enforcing the integrity of packages, as well as address some of the
scalability issues in a sole dm-verity based solution (# of loop back
devices, etc).
This solution cannot be done in userspace as the minimum threat that
IPE should mitigate is an attacker downloads malicious payload with
all required dependencies. These dependencies can lack the userspace
check, bypassing the protection entirely. A similar attack succeeds if
the userspace component is replaced with a version that does not
perform the check. As a result, this can only be done in the common
entry point - the kernel.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch enhances fsverity's capabilities to support both integrity and
authenticity protection by introducing the exposure of built-in
signatures through a new LSM hook. This functionality allows LSMs,
e.g. IPE, to enforce policies based on the authenticity and integrity of
files, specifically focusing on built-in fsverity signatures. It enables
a policy enforcement layer within LSMs for fsverity, offering granular
control over the usage of authenticity claims. For instance, a policy
could be established to only permit the execution of all files with
verified built-in fsverity signatures.
The introduction of a security_inode_setintegrity() hook call within
fsverity's workflow ensures that the verified built-in signature of a file
is exposed to LSMs. This enables LSMs to recognize and label fsverity files
that contain a verified built-in fsverity signature. This hook is invoked
subsequent to the fsverity_verify_signature() process, guaranteeing the
signature's verification against fsverity's keyring. This mechanism is
crucial for maintaining system security, as it operates in kernel space,
effectively thwarting attempts by malicious binaries to bypass user space
stack interactions.
The second to last commit in this patch set will add a link to the IPE
documentation in fsverity.rst.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch introduces a new hook to save inode's integrity
data. For example, for fsverity enabled files, LSMs can use this hook to
save the existence of verified fsverity builtin signature into the inode's
security blob, and LSMs can make access decisions based on this data.
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak, removed changelog]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Allows author of IPE policy to indicate trust for a singular dm-verity
volume, identified by roothash, through "dmverity_roothash" and all
signed and validated dm-verity volumes, through "dmverity_signature".
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: fixed some line length issues in the comments]
Signed-off-by: Paul Moore <paul@paul-moore.com>
dm-verity provides a strong guarantee of a block device's integrity. As
a generic way to check the integrity of a block device, it provides
those integrity guarantees to its higher layers, including the filesystem
level.
However, critical security metadata like the dm-verity roothash and its
signing information are not easily accessible to the LSMs.
To address this limitation, this patch introduces a mechanism to store
and manage these essential security details within a newly added LSM blob
in the block_device structure.
This addition allows LSMs to make access control decisions on the integrity
data stored within the block_device, enabling more flexible security
policies. For instance, LSMs can now revoke access to dm-verity devices
based on their roothashes, ensuring that only authorized and verified
content is accessible. Additionally, LSMs can enforce policies to only
allow files from dm-verity devices that have a valid digital signature to
execute, effectively blocking any unsigned files from execution, thus
enhancing security against unauthorized modifications.
The patch includes new hook calls, `security_bdev_setintegrity()`, in
dm-verity to expose the dm-verity roothash and the roothash signature to
LSMs via preresume() callback. By using the preresume() callback, it
ensures that the security metadata is consistently in sync with the
metadata of the dm-verity target in the current active mapping table.
The hook calls are depended on CONFIG_SECURITY.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[PM: moved sig_size field as discussed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch introduces a new LSM blob to the block_device structure,
enabling the security subsystem to store security-sensitive data related
to block devices. Currently, for a device mapper's mapped device containing
a dm-verity target, critical security information such as the roothash and
its signing state are not readily accessible. Specifically, while the
dm-verity volume creation process passes the dm-verity roothash and its
signature from userspace to the kernel, the roothash is stored privately
within the dm-verity target, and its signature is discarded
post-verification. This makes it extremely hard for the security subsystem
to utilize these data.
With the addition of the LSM blob to the block_device structure, the
security subsystem can now retain and manage important security metadata
such as the roothash and the signing state of a dm-verity by storing them
inside the blob. Access decisions can then be based on these stored data.
The implementation follows the same approach used for security blobs in
other structures like struct file, struct inode, and struct superblock.
The initialization of the security blob occurs after the creation of the
struct block_device, performed by the security subsystem. Similarly, the
security blob is freed by the security subsystem before the struct
block_device is deallocated or freed.
This patch also introduces a new hook security_bdev_setintegrity() to save
block device's integrity data to the new LSM blob. For example, for
dm-verity, it can use this hook to expose its roothash and signing state
to LSMs, then LSMs can save these data into the LSM blob.
Please note that the new hook should be invoked every time the security
information is updated to keep these data current. For example, in
dm-verity, if the mapping table is reloaded and configured to use a
different dm-verity target with a new roothash and signing information,
the previously stored data in the LSM blob will become obsolete. It is
crucial to re-invoke the hook to refresh these data and ensure they are up
to date. This necessity arises from the design of device-mapper, where a
device-mapper device is first created, and then targets are subsequently
loaded into it. These targets can be modified multiple times during the
device's lifetime. Therefore, while the LSM blob is allocated during the
creation of the block device, its actual contents are not initialized at
this stage and can change substantially over time. This includes
alterations from data that the LSM 'trusts' to those it does not, making
it essential to handle these changes correctly. Failure to address this
dynamic aspect could potentially allow for bypassing LSM checks.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: merge fuzz, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE, like SELinux, supports a permissive mode. This mode allows policy
authors to test and evaluate IPE policy without it affecting their
programs. When the mode is changed, a 1404 AUDIT_MAC_STATUS will
be reported.
This patch adds the following audit records:
audit: MAC_STATUS enforcing=0 old_enforcing=1 auid=4294967295
ses=4294967295 enabled=1 old-enabled=1 lsm=ipe res=1
audit: MAC_STATUS enforcing=1 old_enforcing=0 auid=4294967295
ses=4294967295 enabled=1 old-enabled=1 lsm=ipe res=1
The audit record only emit when the value from the user input is
different from the current enforce value.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE
itself.
This patch introduces 3 new audit events.
AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation
of a resource.
AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy
has been changed to another loaded policy.
AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded
into the kernel.
This patch also adds support for success auditing, allowing users to
identify why an allow decision was made for a resource. However, it is
recommended to use this option with caution, as it is quite noisy.
Here are some examples of the new audit record types:
AUDIT_IPE_ACCESS(1420):
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=297 comm="sh" path="/root/vol/bin/hello" dev="tmpfs"
ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW"
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=299 comm="sh" path="/mnt/ipe/bin/hello" dev="dm-0"
ino=2 rule="DEFAULT action=DENY"
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=300 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs"
ino=131 rule="DEFAULT action=DENY"
The above three records were generated when the active IPE policy only
allows binaries from the initramfs to run. The three identical `hello`
binary were placed at different locations, only the first hello from
the rootfs(initramfs) was allowed.
Field ipe_op followed by the IPE operation name associated with the log.
Field ipe_hook followed by the name of the LSM hook that triggered the IPE
event.
Field enforcing followed by the enforcement state of IPE. (it will be
introduced in the next commit)
Field pid followed by the pid of the process that triggered the IPE
event.
Field comm followed by the command line program name of the process that
triggered the IPE event.
Field path followed by the file's path name.
Field dev followed by the device name as found in /dev where the file is
from.
Note that for device mappers it will use the name `dm-X` instead of
the name in /dev/mapper.
For a file in a temp file system, which is not from a device, it will use
`tmpfs` for the field.
The implementation of this part is following another existing use case
LSM_AUDIT_DATA_INODE in security/lsm_audit.c
Field ino followed by the file's inode number.
Field rule followed by the IPE rule made the access decision. The whole
rule must be audited because the decision is based on the combination of
all property conditions in the rule.
Along with the syscall audit event, user can know why a blocked
happened. For example:
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=2138 comm="bash" path="/mnt/ipe/bin/hello" dev="dm-0"
ino=2 rule="DEFAULT action=DENY"
audit[1956]: SYSCALL arch=c000003e syscall=59
success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0
a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0
gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0
ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null)
The above two records showed bash used execve to run "hello" and got
blocked by IPE. Note that the IPE records are always prior to a SYSCALL
record.
AUDIT_IPE_CONFIG_CHANGE(1421):
audit: AUDIT1421
old_active_pol_name="Allow_All" old_active_pol_version=0.0.0
old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649
new_active_pol_name="boot_verified" new_active_pol_version=0.0.0
new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F
auid=4294967295 ses=4294967295 lsm=ipe res=1
The above record showed the current IPE active policy switch from
`Allow_All` to `boot_verified` along with the version and the hash
digest of the two policies. Note IPE can only have one policy active
at a time, all access decision evaluation is based on the current active
policy.
The normal procedure to deploy a policy is loading the policy to deploy
into the kernel first, then switch the active policy to it.
AUDIT_IPE_POLICY_LOAD(1422):
audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0
policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F2676
auid=4294967295 ses=4294967295 lsm=ipe res=1
The above record showed a new policy has been loaded into the kernel
with the policy name, policy version and policy hash.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
As is typical with LSMs, IPE uses securityfs as its interface with
userspace. for a complete list of the interfaces and the respective
inputs/outputs, please see the documentation under
admin-guide/LSM/ipe.rst
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When deleting a directory in the security file system, the existing
securityfs_remove requires the directory to be empty, otherwise
it will do nothing. This leads to a potential risk that the security
file system might be in an unclean state when the intended deletion
did not happen.
This commit introduces a new function securityfs_recursive_remove
to recursively delete a directory without leaving an unclean state.
Co-developed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE is designed to provide system level trust guarantees, this usually
implies that trust starts from bootup with a hardware root of trust,
which validates the bootloader. After this, the bootloader verifies
the kernel and the initramfs.
As there's no currently supported integrity method for initramfs, and
it's typically already verified by the bootloader. This patch introduces
a new IPE property `boot_verified` which allows author of IPE policy to
indicate trust for files from initramfs.
The implementation of this feature utilizes the newly added
`initramfs_populated` hook. This hook marks the superblock of the rootfs
after the initramfs has been unpacked into it.
Before mounting the real rootfs on top of the initramfs, initramfs
script will recursively remove all files and directories on the
initramfs. This is typically implemented by using switch_root(8)
(https://man7.org/linux/man-pages/man8/switch_root.8.html).
Therefore the initramfs will be empty and not accessible after the real
rootfs takes over. It is advised to switch to a different policy
that doesn't rely on the `boot_verified` property after this point.
This ensures that the trust policies remain relevant and effective
throughout the system's operation.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch introduces a new hook to notify security system that the
content of initramfs has been unpacked into the rootfs.
Upon receiving this notification, the security system can activate
a policy to allow only files that originated from the initramfs to
execute or load into kernel during the early stages of booting.
This approach is crucial for minimizing the attack surface by
ensuring that only trusted files from the initramfs are operational
in the critical boot phase.
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE's initial goal is to control both execution and the loading of
kernel modules based on the system's definition of trust. It
accomplishes this by plugging into the security hooks for
bprm_check_security, file_mprotect, mmap_file, kernel_load_data,
and kernel_read_data.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce a core evaluation function in IPE that will be triggered by
various security hooks (e.g., mmap, bprm_check, kexec). This function
systematically assesses actions against the defined IPE policy, by
iterating over rules specific to the action being taken. This critical
addition enables IPE to enforce its security policies effectively,
ensuring that actions intercepted by these hooks are scrutinized for policy
compliance before they are allowed to proceed.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE's interpretation of the what the user trusts is accomplished through
its policy. IPE's design is to not provide support for a single trust
provider, but to support multiple providers to enable the end-user to
choose the best one to seek their needs.
This requires the policy to be rather flexible and modular so that
integrity providers, like fs-verity, dm-verity, or some other system,
can plug into the policy with minimal code changes.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: added NULL check in parse_rule() as discussed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Integrity Policy Enforcement (IPE) is an LSM that provides an
complimentary approach to Mandatory Access Control than existing LSMs
today.
Existing LSMs have centered around the concept of access to a resource
should be controlled by the current user's credentials. IPE's approach,
is that access to a resource should be controlled by the system's trust
of a current resource.
The basis of this approach is defining a global policy to specify which
resource can be trusted.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix sparse warning:
security/lockdown/lockdown.c:79:21: warning:
symbol 'lockdown_lsmid' was not declared. Should it be static?
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The LSM framework has an existing inode_free_security() hook which
is used by LSMs that manage state associated with an inode, but
due to the use of RCU to protect the inode, special care must be
taken to ensure that the LSMs do not fully release the inode state
until it is safe from a RCU perspective.
This patch implements a new inode_free_security_rcu() implementation
hook which is called when it is safe to free the LSM's internal inode
state. Unfortunately, this new hook does not have access to the inode
itself as it may already be released, so the existing
inode_free_security() hook is retained for those LSMs which require
access to the inode.
Cc: stable@vger.kernel.org
Reported-by: syzbot+5446fbf332b0602ede0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000076ba3b0617f65cc8@google.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Some cleanup and style corrections for lsm_hooks.h.
* Drop the lsm_inode_alloc() extern declaration, it is not needed.
* Relocate lsm_get_xattr_slot() and extern variables in the file to
improve grouping of related objects.
* Don't use tabs to needlessly align structure fields.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
To be consistent with most LSM hooks, convert the return value of
hook inode_copy_up_xattr to 0 or a negative error code.
Before:
- Hook inode_copy_up_xattr returns 0 when accepting xattr, 1 when
discarding xattr, -EOPNOTSUPP if it does not know xattr, or any
other negative error code otherwise.
After:
- Hook inode_copy_up_xattr returns 0 when accepting xattr, *-ECANCELED*
when discarding xattr, -EOPNOTSUPP if it does not know xattr, or
any other negative error code otherwise.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
To be consistent with most LSM hooks, convert the return value of
hook vm_enough_memory to 0 or a negative error code.
Before:
- Hook vm_enough_memory returns 1 if permission is granted, 0 if not.
- LSM_RET_DEFAULT(vm_enough_memory_mm) is 1.
After:
- Hook vm_enough_memory reutrns 0 if permission is granted, negative
error code if not.
- LSM_RET_DEFAULT(vm_enough_memory_mm) is 0.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the perf_event->security blob out of the individual
security modules and into the security infrastructure. Instead of
allocating the blobs from within the modules the modules tell the
infrastructure how much space is required, and the space is allocated
there. There are no longer any modules that require the perf_event_free()
hook. The hook definition has been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the infiniband security blob out of the individual
security modules and into the LSM infrastructure. The security modules
tell the infrastructure how much space they require at initialization.
There are no longer any modules that require the ib_free() hook.
The hook definition has been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak, selinux style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the dev_tun security blob out of the individual
security modules and into the LSM infrastructure. The security modules
tell the infrastructure how much space they require at initialization.
There are no longer any modules that require the dev_tun_free hook.
The hook definition has been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak, selinux style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a helper function lsm_blob_alloc() for general use in the hook
specific functions that allocate LSM blobs. Change the hook specific
functions to use this helper. This reduces the code size by a small
amount and will make adding new instances of infrastructure managed
security blobs easier.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the key->security blob out of the individual security
modules and into the security infrastructure. Instead of allocating the
blobs from within the modules the modules tell the infrastructure how
much space is required, and the space is allocated there. There are
no existing modules that require a key_free hook, so the call to it and
the definition for it have been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the sock->sk_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts, which
is an error with the latest Clang
-----BEGIN PGP SIGNATURE-----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=HYew
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
-----BEGIN PGP SIGNATURE-----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=0y6/
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.
Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Enable turbostat extensions to add both perf and PMT
(Intel Platform Monitoring Technology) counters via the cmdline.
Demonstrate PMT access with built-in support for Meteor Lake's Die%c6 counter.
-----BEGIN PGP SIGNATURE-----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=wsSy
-----END PGP SIGNATURE-----
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
New Changes:
- Refactor to a common struct for DRAM and general media CXL events
- Add abstract distance calculation support for CXL
- Add CXL maturity map documentation to detail current state of CXL enabling
- Add warning on mixed CXL VH and RCH/RCD hierachy to inform unsupported config
- Replace ENXIO with EBUSY for inject poison limit reached via debugfs
- Replace ENXIO with EBUSY for inject poison cxl-test support
- XOR math fixup for DPA to SPA translation. Current math works for MODULO arithmetic
where HPA==SPA, however not for XOR decode.
- Move pci config read in cxl_dvsec_rr_decode() to avoid unnecessary acess
Fixes:
- Add a fix to address race condition in CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
-----BEGIN PGP SIGNATURE-----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=HaEG
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Ben Dooks and Jeff Johnson.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRIEdicmeMNCZKVCdo6u2Upsdk6RAUCZqA9+gAKCRA6u2Upsdk6
RJETAQDN9OkX2GJlekEo5NPVD531ekV4G7OZMWTrmPKRINClZQEAj9Spt2zP5v4V
413unRBro9nuKfGgTaquXoHlCuPE+wE=
=L/SP
-----END PGP SIGNATURE-----
Merge tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nzTc
-----END PGP SIGNATURE-----
Merge tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmajsToQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgptHKD/sHZcgf+bt/AOC1XebvCyIYYwWvNaMK2kQG
7Z3kUknbuyML6QcAWSAhG5Z+6qGoIZPFXy1c7EUjs2LLM0KC13zw2D23ipTYXjyQ
6cJPtgTY6Z4WrWyI7QVRG/cByYiUUNv20Cantexzv0H28/S1a5ne9ajwzkuJ5ZaM
9EBIpbb9OtR+HKwzaw8oMng5XwXvxuo+DCX/MnJEHWnVYpRyQbQO7yCWb74zYKs0
cwQp2FyACbGQ6AAt8c8loXYSObhGh6ofdAJoGwC1REZhgS1bxMHFgtnn5Gfq7EyJ
MfPLFevZ99pxHgUkd9WR2DObOVAhY6kTOfuT2d26W50WP4PH40iAp5vapbEs1VDi
/Rjr43PgVlzdGc4+u4O5B+E16mAIOmApBP6p6tgbypGU3+AFLhgKEdX3Tc3GgUqC
zazucEO96ZCMVEjPhSrLLcWwBjlrHwINIgqAVq878D7b+3Qs7RSF6VLr6HP5y2nL
B0CeSz9PY2xOjRgVqPrFeQLuYk9fRo6zAM2Ewd0TOgSg17z8XXznk0E2ME1ULvZW
6Cuz5Pi59l2aqrIhm9gvVmMr+KEAu4YCiYOWI5yhNcz7EalY9SmNTovbBdnpaOTa
74BrL+6lCviLsP4B29iNsqNai5GhAHYS/obJUITuaTAoZpvn9JjWlVBadZd7unbo
Wn+53IKuaA==
=Ci8Z
-----END PGP SIGNATURE-----
Merge tag 'block-6.11-20240726' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
-----BEGIN PGP SIGNATURE-----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=lUXx
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix a syzbot issue for the msg ring cache added in this release. No
ill effects from this one, but it did make KMSAN unhappy (me)
- Sanitize the NAPI timeout handling, by unifying the value handling
into all ktime_t rather than converting back and forth (Pavel)
- Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)
- Fix a theoretical issue with ring polling and cancelations (Pavel)
- Various little cleanups and fixes (Pavel)
* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
io_uring/napi: pass ktime to io_napi_adjust_timeout
io_uring/napi: use ktime in busy polling
io_uring/msg_ring: fix uninitialized use of target_req->flags
io_uring: align iowq and task request error handling
io_uring: kill REQ_F_CANCEL_SEQ
io_uring: simplify io_uring_cmd return
io_uring: fix io_match_task must_hold
io_uring: don't allow netpolling with SETUP_IOPOLL
io_uring: tighten task exit cancellations
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZqSoSAAKCRCRxhvAZXjc
omGDAP9g7+3hDDFvDfYm3cjSw5CcbYodaS0cjzSZV9FQ8jSLUgEAv9741X4c5og1
u8hjOnkYXVJPKn+DzfwBza0wV8qtVQM=
=YIoY
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers 3 stable Rust
releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow), plus beta,
plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we
will need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help promoting
the collaboration between Rust and the kernel.
[1] https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to 'alloc'
having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!' macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----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=8PYF
-----END PGP SIGNATURE-----
Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
+ Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
+ Bug fixes
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation
-----BEGIN PGP SIGNATURE-----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=kO+r
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
Bug fixes:
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation"
* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: unpack transition table if dfa is not present
apparmor: try to avoid refing the label in apparmor_file_open
apparmor: test: add MODULE_DESCRIPTION()
apparmor: take nosymfollow flag into account
apparmor: fix possible NULL pointer dereference
apparmor: fix typo in kernel doc
apparmor: remove useless static inline function is_deleted
apparmor: use kvfree_sensitive to free data->data
apparmor: Fix null pointer deref when receiving skb during sock creation
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZqFEchAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSULcBAPEV5Viu/zox2FdS87EGTqWxEQJcBRvc3ahj
MQk44WtMAP4o2CnwrOoMyZXeq9npteL5lQsVhEzeI+p8oN9C9bThBg==
=zizo
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
- don't use sprintf() with non-constant format string
-----BEGIN PGP SIGNATURE-----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=H8F0
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- don't use sprintf() with non-constant format string
* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: avoid non-constant format string
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmaj8ncACgkQ+vtdtY28
YcMwZRAAh618Xfw+J8pxv62PMw11r0hgMNYoHPYDMt47D7g9Wwa71xdR6OpfIpf+
EyHUXrnXJT6f5sm8mVe9Gsni0MZfgdkwchxlCQej0rJKchdLdAFNXbg4GbhF+0Ht
tA3Y6bPB9FYKHExd87flnt4AO3ypF+1ihjSAAoy4EyEZUfyKgQVPyebDGwlPYlkH
dmhF+q9d94LVw3lj/C7htWGELProogsU3i498ey7m/w8jwiJav2DVJ0cRuld/aPG
7VwGQhJzdndlH1MPcl9slzIPadUrZ0S3/7V4c9cC0E22XpHJzp4RSdGmzsXJ7adp
Q+OlQYiyZLLhEA/alVO/j5SJtfxt+T6+lrpbbu1wcJMFoukXusvL+0KbxxbExEn0
/3MrZuxEq3F+jcKtMR/1PFcO7o1uEzzyTZcdufV3siABjZqmG4AFzBhHWP4Xh2Uw
6hs7R/Ktf2lmacCK9fawfJF6Qq4RtFIakUuI6S3Q3oHHTRw6kr1Lsw+Wko/K20mO
BEdfhocxEk5vf/kGxcBfM+GTybhagbBh0GxYB/Lm8vATfLHzhunipbc0ZwozDfPu
IWiY+Nv+hGeGhfvSfNFUcsknF+QwtSjGis7hQjHkJc/siahaXJVAaf+tvtL1xm/p
0CGPIJFZgzkcbjCT3iPVaJjfyRlMe9l7HJ6XiBSrMpiFpZPTgT8=
=Nn/d
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
- Fix NULL dereference when freeing domain in Unisoc SPRD driver.
- Separate assignment statements with semicolons in AMD page-table code.
- Fix Tegra erratum workaround when the CPU is using 16KiB pages.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaiQhUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNI3SB/9m78weKYVHUc87Vwzs/3aEmMzjNiCuIIax
nFKIFKZIeL7UqiUK1dehoVU+S/JYYjjPyR/0yeb+l4w4IaTmkcAu48r9rDssuoLe
I6rkLbIfwGIw5pKtf21UtkRmMhnoW2ptx8qrCFbvIkFYVWyfayP+c7hkbKBh2bMD
cal8bYrgWuax3TTgxu5V6cBBSK+EDmdN2ZVGArY1x7VZImFWZuZ1s5OowjHCX4Q1
il2ETdL4M8OmlIsitO96I0zvne2Ci+12i5TQOl8Ao5d7BhM5LfjdQjeNvT6YhdX9
X3u+p+GfVYQNZI1HYvwNvWTEuF+PIj5Oem9hfKDo/8vAYERe2M1A
=7kvS
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
Two commits are included to fix some regressions. These commits should also
be applied to the v6.10 kernel as well.
The recent integration of compiler collections introduced the technology
to check flexible array length at runtime by providing proper annotations.
In v6.10 kernel, a patch was merged into firewire subsystem to utilize it,
however the annotation was inadequate. There is also the related change for
the flexible array in sound subsystem, but it causes a regression where
the data in the payload of isochronous packet is incorrect for some
devices. These bugs are now fixed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZqRPbgAKCRCsLtaWM8Lw
E4IDAQCr4s3/W1fwkUcxvaFKn4ngELXtZ8D2BtI0I3x+axOvggEA4NhtbSwusyKK
r3Zsyf8r9WrzIOMFASqqV7LlaiWTogI=
=eq44
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which came
along with it since it's still the merge window and clearly had a bunch
of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmajpbAACgkQJNaLcl1U
h9BK3gf6A/EoyfNTbY7eqnGtghg6PXqBzWHkfHtdqxMNvlf2YBYPu0Zj4i/1Tqde
3UcDCZnKdYBIH3GX0wzRlTa/OUZmfZ6i5oyUAfqRCYFj8w9AydTLrfm6d9MizgWf
ZrRcBLRxMqUvlADH4odWqXBo8+Eyx2A2n98bVhIEDPieJDaRtlUz1oym5AKmInP+
AuiF43N8HSoumv/zmwMZWit9TugUnyqGeeKiUBoW5SDDsvCUGy/2hCkyoJDGZDCg
NpEllllMNz1Weggt3e3q52mEV9bfjoyefRg/z9/TEIEyuYFWCqZ1ilbrKKaVVXF8
JKicvFtVDErk5iVx7a5090JXcgh15Q==
=CfDJ
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
