The Jitter RNG time delta is computed based on the difference of two
high-resolution, 64-bit time stamps. However, the test interface added
in 69f1c387ba only outputs the lower 32 bits of those time stamps. To
ensure all information is available during the evaluation process of
the Jitter RNG, output the full 64-bit time stamps.
Any clients collecting data from the test interface will need to be
updated to take this change into account.
Additionally, the size of the temporary buffer that holds the data for
user space has been clarified. Previously, this buffer was
JENT_TEST_RINGBUFFER_SIZE (= 1000) bytes in size, however that value
represents the number of samples held in the kernel space ring buffer,
with each sample taking 8 (previously 4) bytes.
Rather than increasing the size to allow for all 1000 samples to be
output, we keep it at 1000 bytes, but clarify that this means at most
125 64-bit samples will be output every time this interface is called.
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On imx31.dtsi the rng compatible string contains "fsl,imx31-rnga" only.
Adjust the binding to accept passing "fsl,imx31-rnga" only.
This fixes the following dt-schema warning:
imx31-lite.dtb: rng@53fb0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx31-rnga'] is too short
'fsl,imx21-rnga' was expected
'fsl,imx25-rngb' was expected
'fsl,imx31-rnga' is not one of ['fsl,imx6sl-rngb', 'fsl,imx6sll-rngb', 'fsl,imx6ull-rngb']
'fsl,imx35-rngc' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The format specifier of "unsigned int" in sprintf() should be "%u", not
"%d".
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/crypto to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Resetting the service arbiter config can cause potential issues
related to response ordering and ring flow control check in the
event of AER or device hang. This is because it results in changing
the default response ring size from 32 bytes to 16 bytes. The service
arbiter config reset also disables response ring flow control check.
Thus, by removing this reset we can prevent the service arbiter from
being configured inappropriately, which leads to undesired device
behaviour in the event of errors.
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephen reports a documentation build warning for "make htmldocs"
introduced by recent commit 6b34562f0c ("crypto: akcipher - Drop
sign/verify operations").
The commit renamed a paragraph title in a header file, but neglected to
amend the title reference in the API documentation. Fix it.
Fixes: 6b34562f0c ("crypto: akcipher - Drop sign/verify operations")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241008172926.0b995ea7@canb.auug.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit e2d60e2f59 ("crypto: x86/cast5 - drop CTR mode implementation")
removed the calls to cast5_ctr_16way but left the avx implementation.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure that the inline function contains no more than 10 lines.
move q_num_set() from hisi_acc_qm.h to qm.c.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
adf_devmgr_get_first has been unused since commit
4a4b0bad06 ("crypto: qat - fix crypto_get_instance_node function")
Remove it.
(Build tested only, I don't own the hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fw_objs[] array has "num_objs" elements so the > needs to be >= to
prevent an out of bounds read.
Fixes: 10484c647a ("crypto: qat - refactor fw config logic for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is called from uof_get_name_420xx() where "num_objs" is the
ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of
bounds access.
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since I'll be retiring from Intel and will no longer have access to
hardware, Kristen Accardi will be taking over as the iaa_crypto
maintainer.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For iaa_crypto operations, it's assumed that if an operation doesn't
make progress, the IAA watchdog timer will kick in and set the
completion status bit to failure and the reason to completion timeout.
Some systems may have broken hardware that doesn't even do that, which
can result in an infinite status-checking loop. Add a check for that
in the loop, and disable the driver if it occurs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is to fix an issue when simd is not usable that data mismatch
may occur. The fix is to register algs as SIMD modules so that the
algorithm is excecuted when SIMD instructions is usable. Called
gcm_update() to generate the final digest if needed.
A new module rfc4106(gcm(aes)) is also added.
Fixes: cdcecfd999 ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Re-write AES/GCM assembly codes with smaller footprints and
small performance gain. Handling the partial blocks differently that
computes partial block to AES states and re-assembles to a complete
block and then computes a full-block hash.
Added gcm_update() to update the last partial block hash value and
generate the final digest.
Fixes: fd0e9b3e2e ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a buggy driver returns a length that is longer than the size
of the buffer provided to it, then this may lead to a buffer overread
in the caller.
Stop this by adding a check for it in the hwrng core.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Broadcom Broadband Access (BCA) SoC:s include the
iproc r200 hwrng so enable it to be selected for these
platforms.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs functions are guaranteed to return a valid error code
instead of NULL upon failure. Consequently, the driver can directly
propagate any error returned without additional checks.
Remove the unnecessary `if` statement after debugfs_create_dir(). If
this function fails, the error code is stored in accel_dev->debugfs_dir
and utilized in subsequent debugfs calls.
Additionally, since accel_dev->debugfs_dir is assured to be non-NULL,
remove the superfluous NULL pointer checks within the adf_dbgfs_add()
and adf_dbgfs_rm().
Fixes: 9260db6640 ("crypto: qat - move dbgfs init to separate file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'ctrldev' and 'qidev' are the same.
Remove the former to slightly simplify the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type of the last parameter given to devm_add_action_or_reset() is
"struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to
"struct device *".
Pass the correct parameter to devm_add_action_or_reset() so that the
resources are released as expected.
Fixes: f414de2e2f ("crypto: caam - use devres to de-initialize QI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the driver enables clock gating for only one cluster.
However, the new hardware has three clusters. Therefore, clock
gating needs to be enabled based on the number of clusters on the
current hardware.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "err" variable may be returned without an initialized value.
Fixes: 8e3a67f2de ("crypto: lib/mpi - Add error checks to extension")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix passing an initialization vector in the payload field which
is necessary for AES in CBC mode even with hardware-bound keys.
Fixes: 3d16af0b4c ("crypto: mxs-dcp: Add support for hardware-bound keys")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function meson_crypto_probe, devm_platform_ioremap_resource()
have already contains error message, so remove the
redundant assignment and error messages.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
software_key_query() returns the curve size as maximum signature size
for ecrdsa. However it should return twice as much.
It's only the maximum signature size that seems to be off. The maximum
digest size is likewise set to the curve size, but that's correct as it
matches the checks in ecrdsa_set_pub_key() and ecrdsa_verify().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Alternatively to the X9.62 encoding of ecdsa signatures, which uses
ASN.1 and is already supported by the kernel, there's another common
encoding called P1363. It stores r and s as the concatenation of two
big endian, unsigned integers. The name originates from IEEE P1363.
Add a P1363 template in support of the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
P1363 is prescribed by SPDM 1.2.1 margin no 44:
"For ECDSA signatures, excluding SM2, in SPDM, the signature shall be
the concatenation of r and s. The size of r shall be the size of
the selected curve. Likewise, the size of s shall be the size of
the selected curve. See BaseAsymAlgo in NEGOTIATE_ALGORITHMS for
the size of r and s. The byte order for r and s shall be in big
endian order. When placing ECDSA signatures into an SPDM signature
field, r shall come first followed by s."
Link: https://www.dmtf.org/sites/default/files/standards/documents/DSP0274_1.2.1.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
software_key_query() returns the maximum signature and digest size for a
given key to user space. When it only supported RSA keys, calculating
those sizes was trivial as they were always equivalent to the key size.
However when ECDSA was added, the function grew somewhat complicated
calculations which take the ASN.1 encoding and curve into account.
This doesn't scale well and adjusting the calculations is easily
forgotten when adding support for new encodings or curves. In fact,
when NIST P521 support was recently added, the function was initially
not amended:
https://lore.kernel.org/all/b749d5ee-c3b8-4cbd-b252-7773e4536e07@linux.ibm.com/
Introduce a ->max_size() callback to struct sig_alg and take advantage
of it to move the signature size calculations to ecdsa-x962.c.
Introduce a ->digest_size() callback to struct sig_alg and move the
maximum ECDSA digest size to ecdsa.c. It is common across ecdsa-x962.c
and the upcoming ecdsa-p1363.c and thus inherited by both of them.
For all other algorithms, continue using the key size as maximum
signature and digest size.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_sig_maxsize() is a bit of a misnomer as it doesn't return the
maximum signature size, but rather the key size.
Rename it as well as all implementations of the ->max_size callback.
A subsequent commit introduces a crypto_sig_maxsize() function which
returns the actual maximum signature size.
While at it, change the return type of crypto_sig_keysize() from int to
unsigned int for consistency with crypto_akcipher_maxsize(). None of
the callers checks for a negative return value and an error condition
can always be indicated by returning zero.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike the rsa driver, which separates signature decoding and
signature verification into two steps, the ecdsa driver does both in one.
This restricts users to the one signature format currently supported
(X9.62) and prevents addition of others such as P1363, which is needed
by the forthcoming SPDM library (Security Protocol and Data Model) for
PCI device authentication.
Per Herbert's suggestion, change ecdsa to use a "raw" signature encoding
and then implement X9.62 and P1363 as templates which convert their
respective encodings to the raw one. One may then specify
"x962(ecdsa-nist-XXX)" or "p1363(ecdsa-nist-XXX)" to pick the encoding.
The present commit moves X9.62 decoding to a template. A separate
commit is going to introduce another template for P1363 decoding.
The ecdsa driver internally represents a signature as two u64 arrays of
size ECC_MAX_BYTES. This appears to be the most natural choice for the
raw format as it can directly be used for verification without having to
further decode signature data or copy it around.
Repurpose all the existing test vectors for "x962(ecdsa-nist-XXX)" and
create a duplicate of them to test the raw encoding.
Link: https://lore.kernel.org/all/ZoHXyGwRzVvYkcTP@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When extracting a signature component r or s from an ASN.1-encoded
integer, ecdsa_get_signature_rs() subtracts the expected length
"bufsize" from the ASN.1 length "vlen" (both of unsigned type size_t)
and stores the result in "diff" (of signed type ssize_t).
This results in a signed integer overflow if vlen > SSIZE_MAX + bufsize.
The kernel is compiled with -fno-strict-overflow, which implies -fwrapv,
meaning signed integer overflow is not undefined behavior. And the
function does check for overflow:
if (-diff >= bufsize)
return -EINVAL;
So the code is fine in principle but not very obvious. In the future it
might trigger a false-positive with CONFIG_UBSAN_SIGNED_WRAP=y.
Avoid by comparing the two unsigned variables directly and erroring out
if "vlen" is too large.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If <linux/asn1_decoder.h> is the first header included from a .c file
(due to headers being sorted alphabetically), the compiler complains:
include/linux/asn1_decoder.h:18:29: error: unknown type name 'size_t'
Avoid by including <linux/types.h>.
Jonathan notes that the counterpart <linux/asn1_encoder.h> already
includes <linux/types.h>, but additionally includes the unnecessary
<linux/bug.h>. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_sig_*() API calls lived in sig.c so far because they needed
access to struct crypto_sig_type: This was necessary to differentiate
between signature algorithms that had already been migrated from
crypto_akcipher to crypto_sig and those that hadn't yet.
Now that all algorithms have been migrated, the API calls can become
static inlines in <crypto/sig.h> to mimic what <crypto/akcipher.h> is
doing.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced and all asymmetric
sign/verify algorithms have been migrated to it.
The sign/verify operations can thus be dropped from akcipher_alg.
It is now purely for asymmetric encrypt/decrypt.
Move struct crypto_akcipher_sync_data from internal.h to akcipher.c and
unexport crypto_akcipher_sync_{prep,post}(): They're no longer used by
sig.c but only locally in akcipher.c.
In crypto_akcipher_sync_{prep,post}(), drop various NULL pointer checks
for data->dst as they were only necessary for the verify operation.
In the crypto_sig_*() API calls, remove the forks that were necessary
while algorithms were converted from crypto_akcipher to crypto_sig
one by one.
In struct akcipher_testvec, remove the "params", "param_len" and "algo"
elements as they were only needed for the ecrdsa verify operation.
Remove corresponding dead code from test_akcipher_one() as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The drivers aspeed-acry.c, hpre_crypto.c and jh7110-rsa.c purport to
implement sign/verify operations for raw (unpadded) "rsa".
But there is no such thing as message digests generally need to be
padded according to a predefined scheme (such as PSS or PKCS#1) to
match the size of the usually much larger RSA keys.
The bogus sign/verify operations defined by these drivers are never
called but block removal of sign/verify from akcipher_alg. Drop them.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The virtio crypto driver exposes akcipher sign/verify operations in a
user space ABI. This blocks removal of sign/verify from akcipher_alg.
Herbert opines:
"I would say that this is something that we can break. Breaking it
is no different to running virtio on a host that does not support
these algorithms. After all, a software implementation must always
be present.
I deliberately left akcipher out of crypto_user because the API
is still in flux. We should not let virtio constrain ourselves."
https://lore.kernel.org/all/ZtqoNAgcnXnrYhZZ@gondor.apana.org.au/
"I would remove virtio akcipher support in its entirety. This API
was never meant to be exposed outside of the kernel."
https://lore.kernel.org/all/Ztqql_gqgZiMW8zz@gondor.apana.org.au/
Drop sign/verify support from virtio crypto. There's no strong reason
to also remove encrypt/decrypt support, so keep it.
A key selling point of virtio crypto is to allow guest access to crypto
accelerators on the host. So far the only akcipher algorithm supported
by virtio crypto is RSA. Dropping sign/verify merely means that the
PKCS#1 padding is now always generated or verified inside the guest,
but the actual signature generation/verification (which is an RSA
decrypt/encrypt operation) may still use an accelerator on the host.
Generating or verifying the PKCS#1 padding is cheap, so a hardware
accelerator won't be of much help there. Which begs the question
whether virtio crypto support for sign/verify makes sense at all.
It would make sense for the sign operation if the host has a security
chip to store asymmetric private keys. But the kernel doesn't even
have an asymmetric_key_subtype yet for hardware-based private keys.
There's at least one rudimentary driver for such chips (atmel-ecc.c for
ATECC508A), but it doesn't implement the sign operation. The kernel
would first have to grow support for a hardware asymmetric_key_subtype
and at least one driver implementing the sign operation before exposure
to guests via virtio makes sense.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When constructing the EMSA-PKCS1-v1_5 padding for the sign operation,
a buffer for the padding is allocated and the Full Hash Prefix is copied
into it. The padding is then passed to the RSA decrypt operation as an
sglist entry which is succeeded by a second sglist entry for the hash.
Actually copying the hash prefix around is completely unnecessary.
It can simply be referenced from a third sglist entry which sits
in-between the padding and the digest.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RSASSA-PKCS1-v1_5 sign operation currently only checks that the
digest length is less than "key_size - hash_prefix->size - 11".
The verify operation merely checks that it's more than zero.
Actually the precise digest length is known because the hash algorithm
is specified upon instance creation and the digest length is encoded
into the final byte of the hash algorithm's Full Hash Prefix.
So check for the exact digest length rather than solely relying on
imprecise maximum/minimum checks.
Keep the maximum length check for the sign operation as a safety net,
but drop the now unnecessary minimum check for the verify operation.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate the sign/verify operations from rsa-pkcs1pad.c to a separate
rsassa-pkcs1.c which uses the new backend.
Consequently there are now two templates which build on the "rsa"
akcipher_alg:
* The existing "pkcs1pad" template, which is instantiated as an
akcipher_instance and retains the encrypt/decrypt operations of
RSAES-PKCS1-v1_5 (RFC 8017 sec 7.2).
* The new "pkcs1" template, which is instantiated as a sig_instance
and contains the sign/verify operations of RSASSA-PKCS1-v1_5
(RFC 8017 sec 8.2).
In a separate step, rsa-pkcs1pad.c could optionally be renamed to
rsaes-pkcs1.c for clarity. Additional "oaep" and "pss" templates
could be added for RSAES-OAEP and RSASSA-PSS.
Note that it's currently allowed to allocate a "pkcs1pad(rsa)" transform
without specifying a hash algorithm. That makes sense if the transform
is only used for encrypt/decrypt and continues to be supported. But for
sign/verify, such transforms previously did not insert the Full Hash
Prefix into the padding. The resulting message encoding was incompliant
with EMSA-PKCS1-v1_5 (RFC 8017 sec 9.2) and therefore nonsensical.
From here on in, it is no longer allowed to allocate a transform without
specifying a hash algorithm if the transform is used for sign/verify
operations. This simplifies the code because the insertion of the Full
Hash Prefix is no longer optional, so various "if (digest_info)" clauses
can be removed.
There has been a previous attempt to forbid transform allocation without
specifying a hash algorithm, namely by commit c0d20d22e0 ("crypto:
rsa-pkcs1pad - Require hash to be present"). It had to be rolled back
with commit b3a8c8a5eb ("crypto: rsa-pkcs1pad: Allow hash to be
optional [ver #2]"), presumably because it broke allocation of a
transform which was solely used for encrypt/decrypt, not sign/verify.
Avoid such breakage by allowing transform allocation for encrypt/decrypt
with and without specifying a hash algorithm (and simply ignoring the
hash algorithm in the former case).
So again, specifying a hash algorithm is now mandatory for sign/verify,
but optional and ignored for encrypt/decrypt.
The new sig_alg API uses kernel buffers instead of sglists, which
avoids the overhead of copying signature and digest from sglists back
into kernel buffers. rsassa-pkcs1.c is thus simplified quite a bit.
sig_alg is always synchronous, whereas the underlying "rsa" akcipher_alg
may be asynchronous. So await the result of the akcipher_alg, similar
to crypto_akcipher_sync_{en,de}crypt().
As part of the migration, rename "rsa_digest_info" to "hash_prefix" to
adhere to the spec language in RFC 9580. Otherwise keep the code
unmodified wherever possible to ease reviewing and bisecting. Leave
several simplification and hardening opportunities to separate commits.
rsassa-pkcs1.c uses modern __free() syntax for allocation of buffers
which need to be freed by kfree_sensitive(), hence a DEFINE_FREE()
clause for kfree_sensitive() is introduced herein as a byproduct.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pkcs1pad_set_pub_key() and pkcs1pad_set_priv_key() are almost identical.
The upcoming migration of sign/verify operations from rsa-pkcs1pad.c
into a separate crypto_template will require another copy of the exact
same functions. When RSASSA-PSS and RSAES-OAEP are introduced, each
will need yet another copy.
Deduplicate the functions into a single one which lives in a common
header file for reuse by RSASSA-PKCS1-v1_5, RSASSA-PSS and RSAES-OAEP.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate ecrdsa.c to the new backend.
One benefit of the new API is the use of kernel buffers instead of
sglists, which avoids the overhead of copying signature and digest
sglists back into kernel buffers. ecrdsa.c is thus simplified quite
a bit.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate ecdsa.c to the new backend.
One benefit of the new API is the use of kernel buffers instead of
sglists, which avoids the overhead of copying signature and digest
sglists back into kernel buffers. ecdsa.c is thus simplified quite
a bit.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 6cb8815f41 ("crypto: sig - Add interface for sign/verify")
began a transition of asymmetric sign/verify operations from
crypto_akcipher to a new crypto_sig frontend.
Internally, the crypto_sig frontend still uses akcipher_alg as backend,
however:
"The link between sig and akcipher is meant to be temporary. The
plan is to create a new low-level API for sig and then migrate
the signature code over to that from akcipher."
https://lore.kernel.org/r/ZrG6w9wsb-iiLZIF@gondor.apana.org.au/
"having a separate alg for sig is definitely where we want to
be since there is very little that the two types actually share."
https://lore.kernel.org/r/ZrHlpz4qnre0zWJO@gondor.apana.org.au/
Take the next step of that migration and augment the crypto_sig frontend
with a sig_alg backend to which all algorithms can be moved.
During the migration, there will briefly be signature algorithms that
are still based on crypto_akcipher, whilst others are already based on
crypto_sig. Allow for that by building a fork into crypto_sig_*() API
calls (i.e. crypto_sig_maxsize() and friends) such that one of the two
backends is selected based on the transform's cra_type.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ECDSA test vectors contain "params", "param_len" and "algo" elements
even though ecdsa.c doesn't make any use of them. The only algorithm
implementation using those elements is ecrdsa.c.
Drop the unused test vector elements.
For the curious, "params" is an ASN.1 SEQUENCE of OID_id_ecPublicKey
and a second OID identifying the curve. For example:
"\x30\x13\x06\x07\x2a\x86\x48\xce\x3d\x02\x01\x06\x08\x2a\x86\x48"
"\xce\x3d\x03\x01\x01"
... decodes to:
SEQUENCE (OID_id_ecPublicKey, OID_id_prime192v1)
The curve OIDs used in those "params" elements are unsurprisingly:
OID_id_prime192v1 (2a8648ce3d030101)
OID_id_prime256v1 (2a8648ce3d030107)
OID_id_ansip384r1 (2b81040022)
OID_id_ansip521r1 (2b81040023)
Those are just different names for secp192r1, secp256r1, secp384r1 and
secp521r1, respectively, per RFC 8422 appendix A:
https://www.rfc-editor.org/rfc/rfc8422#appendix-A
The entries for secp384r1 and secp521r1 curves contain a useful code
comment calling out the curve and hash. Add analogous code comments
to secp192r1 and secp256r1 curve entries.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
imx: use devie name instead of genereic imx_mu_chan as interrupt name
qcom: enable sa8255p and qcs8300 ipc controllers
bcm2835: Fix timeout during suspend mode
mailbox: convert to use use of_property_match_string
mediatek: enable mt8188
spreadtrum: use devm_clk_get_enabled helpers
rockchip: fix device-id typo
-----BEGIN PGP SIGNATURE-----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=nCRH
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
