The c++tools configure fragments need to be built with a C++ compiler.
In addition, the stand-alone server uses diagnostic mechanisms in common
with GCC, but needs to define implementations for gcc_assert and
supporting output functions.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
PR c++/98821 - modules : c++tools configures with CC but code fragments assume CXX.
PR c++/98821
c++tools/ChangeLog:
* config.h.in: Regenerate.
* configure: Regenerate.
* configure.ac: Configure using C++. Pull logic to
detect enabled checking modes; default to release
checking.
* server.cc (AI_NUMERICSERV): Define a fallback value.
(gcc_assert): New.
(gcc_unreachable): New.
(fancy_abort): Only build when checking is enabled.
Co-authored-by: Jakub Jelinek <jakub@redhat.com>
If the -fprofile-info-section is used, then the gcov information is registered
in a linker set. This is done by build_gcov_info_var_registration(). The
compiler generated object placed in the section was not marked as referenced,
so once optimization was enabled, this object was optimized away. Mark it as
referenced.
gcc/
* coverage.c (build_gcov_info_var_registration): Mark the object placed
in the linker set as referenced so that it does not get optimized away.
The target data construct shouldn't affect omp_check_private, unless
the decl there is privatized (use_device_* clauses). The routine
had some code for that, but it just did continue; in a loop that looped
only if the region type is one of selected 4 kinds, so effectively resulted
in return false; instead of looping again. And not diagnosing lastprivate
(or reduction etc.) on a variable that is private to containing parallel
results in ICEs later on, as there is no original list item to which store
the last result.
The target construct is unclear as it has an implicit parallel region
and it is not obvious if the data privatization clauses on the construct
shall be treated as data privatization on the implicit parallel or just
on the target. For now treat those as privatization on the implicit
parallel, but treat map clauses as shared on the implicit parallel.
2021-07-21 Jakub Jelinek <jakub@redhat.com>
PR middle-end/101535
* gimplify.c (omp_check_private): Properly skip ORT_TARGET_DATA
contexts in which decl isn't privatized and for ORT_TARGET return
false if decl is mapped.
* c-c++-common/gomp/pr101535-1.c: New test.
* c-c++-common/gomp/pr101535-2.c: New test.
The following testcase ICEs because we haven't verified if reduction decl
has reference type that TREE_TYPE of the reference is a complete type,
require_complete_type on the decl doesn't ensure that.
2021-07-21 Jakub Jelinek <jakub@redhat.com>
PR c++/101516
* semantics.c (finish_omp_reduction_clause): Also call
complete_type_or_else and return true if it fails.
* g++.dg/gomp/pr101516.C: New test.
gcc/fortran/ChangeLog:
* decl.c (gfc_verify_c_interop_param): Update for F2008 + F2018
changes; reject unsupported bits with 'Error: Sorry,'.
* trans-expr.c (gfc_conv_procedure_call): Fix condition to
For using CFI descriptor with characters.
gcc/testsuite/ChangeLog:
* gfortran.dg/iso_c_binding_char_1.f90: Update dg-error.
* gfortran.dg/pr32599.f03: Use -std=-f2003 + update comment.
* gfortran.dg/bind_c_char_10.f90: New test.
* gfortran.dg/bind_c_char_6.f90: New test.
* gfortran.dg/bind_c_char_7.f90: New test.
* gfortran.dg/bind_c_char_8.f90: New test.
* gfortran.dg/bind_c_char_9.f90: New test.
Unroll and jam can sometimes leave redundancies. E.g. for:
for (int j = 0; j < 100; ++j)
for (int i = 0; i < 100; ++i)
x[i] += y[i] * z[j][i];
the new loop will do the equivalent of:
for (int j = 0; j < 100; j += 2)
for (int i = 0; i < 100; ++i)
{
x[i] += y[i] * z[j][i];
x[i] += y[i] * z[j + 1][i];
}
with two reads of y[i] and with a round trip through memory for x[i].
At the moment these redundancies survive till vectorisation, so if
vectorisation succeeds, we're reliant on being able to remove the
redundancies from the vector form. This can be hard to do if
a vector loop uses predication. E.g. on SVE we end up with:
.L3:
ld1w z3.s, p0/z, [x3, x0, lsl 2]
ld1w z0.s, p0/z, [x5, x0, lsl 2]
ld1w z1.s, p0/z, [x2, x0, lsl 2]
mad z1.s, p1/m, z0.s, z3.s
ld1w z2.s, p0/z, [x4, x0, lsl 2]
st1w z1.s, p0, [x3, x0, lsl 2] // store to x[i]
ld1w z1.s, p0/z, [x3, x0, lsl 2] // load back from x[i]
mad z0.s, p1/m, z2.s, z1.s
st1w z0.s, p0, [x3, x0, lsl 2]
add x0, x0, x6
whilelo p0.s, w0, w1
b.any .L3
This patch runs a value-numbering pass on loops after a successful
unroll-and-jam, which gets rid of the unnecessary load and gives
a more accurate idea of vector costs. Unfortunately the redundant
store still persists without a pre-vect DSE, but that feels like
a separate issue.
Note that the pass requires the loop to have a single exit,
hence the simple calculation of exit_bbs.
gcc/
* gimple-loop-jam.c: Include tree-ssa-sccvn.h.
(tree_loop_unroll_and_jam): Run value-numbering on a loop that
has been successfully unrolled.
gcc/testsuite/
* gcc.dg/unroll-10.c: New test.
unroll and jam can decide to unroll the outer loop of a nest like:
for (int j = 0; j < n; ++j)
for (int i = 0; i < n; ++i)
x[i] += __builtin_expf (y[j][i]);
It then uses a tail loop to handle any left-over iterations.
However, the code is structured so that this tail loop is always used.
If n is a multiple of the unroll factor UF, the final UF iterations will
use the tail loop rather than the unrolled loop.
“Fixing” that for variable loop counts would mean introducing another
runtime test: a branch around the tail loop if there are no more
iterations. There's at least an argument that the overhead of doing
that test might not pay for itself.
But we use this structure even if the iteration count is provably
a multiple of UF at compile time. E.g. with s/n/100/ and an
unroll factor of 2, the first 98 iterations use the unrolled loop
and the final 2 iterations use the original loop.
This patch makes the unroller avoid a tail loop in that case.
The end result seemed easier to follow if variables were declared
at the point of initialisation, so that it's more obvious which
ones are meaningful even when there's no tail loop.
gcc/
* tree-ssa-loop-manip.c (determine_exit_conditions): Return a null
exit condition if no tail loop is needed, and if the original exit
condition should therefore be kept as-is.
(tree_transform_and_unroll_loop): Handle that case here too.
gcc/testsuite/
* gcc.dg/unroll-9.c: New test/
This patch follows Martin's suggestion at the link[1] to do more
refactorings by:
- Adding m_ prefix for class pcom_worker member variables.
- Using auto_vec instead of vec among class pcom_worker,
chain, component and comp_ptrs.
The changes in tree-data-ref.[ch] is required, without it the
destruction of auto_vec instance could try to double free the
memory pointed by m_vec.
Bootstrapped and regtested on powerpc64le-linux-gnu P9,
x86_64-redhat-linux and aarch64-linux-gnu, also
bootstrapped on ppc64le P9 with bootstrap-O3 config.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2021-June/573424.html
gcc/ChangeLog:
* tree-data-ref.c (free_dependence_relations): Adjust to pass vec
by reference.
(free_data_refs): Likewise.
* tree-data-ref.h (free_dependence_relations): Likewise.
(free_data_refs): Likewise.
* tree-predcom.c (struct chain): Use auto_vec instead of vec for
members.
(struct component): Likewise.
(pcom_worker::pcom_worker): Adjust for auto_vec and renaming changes.
(pcom_worker::~pcom_worker): Likewise.
(pcom_worker::release_chain): Adjust as auto_vec changes.
(pcom_worker::loop): Rename to ...
(pcom_worker::m_loop): ... this.
(pcom_worker::datarefs): Rename to ...
(pcom_worker::m_datarefs): ... this. Use auto_vec instead of vec.
(pcom_worker::dependences): Rename to ...
(pcom_worker::m_dependences): ... this. Use auto_vec instead of vec.
(pcom_worker::chains): Rename to ...
(pcom_worker::m_chains): ... this. Use auto_vec instead of vec.
(pcom_worker::looparound_phis): Rename to ...
(pcom_worker::m_looparound_phis): ... this. Use auto_vec instead of
vec.
(pcom_worker::cache): Rename to ...
(pcom_worker::m_cache): ... this. Use auto_vec instead of vec.
(pcom_worker::release_chain): Adjust for auto_vec changes.
(pcom_worker::release_chains): Adjust for auto_vec and renaming
changes.
(release_component): Remove.
(release_components): Adjust for release_component removal.
(component_of): Adjust to use vec.
(merge_comps): Likewise.
(pcom_worker::aff_combination_dr_offset): Adjust for renaming changes.
(pcom_worker::determine_offset): Likewise.
(class comp_ptrs): Remove.
(pcom_worker::split_data_refs_to_components): Adjust for renaming
changes, for comp_ptrs removal with auto_vec.
(pcom_worker::suitable_component_p): Adjust for renaming changes.
(pcom_worker::filter_suitable_components): Adjust for release_component
removal.
(pcom_worker::valid_initializer_p): Adjust for renaming changes.
(pcom_worker::find_looparound_phi): Likewise.
(pcom_worker::add_looparound_copies): Likewise.
(pcom_worker::determine_roots_comp): Likewise.
(pcom_worker::single_nonlooparound_use): Likewise.
(pcom_worker::execute_pred_commoning_chain): Likewise.
(pcom_worker::execute_pred_commoning): Likewise.
(pcom_worker::try_combine_chains): Likewise.
(pcom_worker::prepare_initializers_chain): Likewise.
(pcom_worker::prepare_initializers): Likewise.
(pcom_worker::prepare_finalizers_chain): Likewise.
(pcom_worker::prepare_finalizers): Likewise.
(pcom_worker::tree_predictive_commoning_loop): Likewise.
Bump asan/tsan versions for the upstream commit:
commit acf0a6428681dccac803984bfbb1e3e54248f090
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Fri Jul 2 02:42:38 2021 +0200
[sanitizer] Fix __sanitizer_kernel_sigset_t endianness issue
setuid(0) hangs on SystemZ under TSan because TSan's BackgroundThread
ignores SIGSETXID. This in turn happens because internal_sigdelset()
messes up the mask bits on big-endian system due to how
__sanitizer_kernel_sigset_t is defined.
Commit d9a1a53b8d80 ("[ESan] [MIPS] Fix workingset-signal-posix.cpp on
MIPS") fixed this for MIPS by adjusting the __sanitizer_kernel_sigset_t
definition. Generalize this by defining __SANITIZER_KERNEL_NSIG based
on kernel's _NSIG and using uptr[] for __sanitizer_kernel_sigset_t.sig
on all platforms.
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D105629
which changed __sanitizer_kernel_sigset_t and changed the ABI for function
void __sanitizer_syscall_post_impl_rt_sigaction
(long int, long int,
const __sanitizer::__sanitizer_kernel_sigaction_t*,
__sanitizer::__sanitizer_kernel_sigaction_t*,
SIZE_T);
* asan/libtool-version: Bump version.
* tsan/libtool-version: Likewise.
When filesystem__create_directories checks to see if the path already
exists and resovles to a directory, it uses filesystem::symlink_status,
which means it reports an error if the path is a symlink. It should use
filesystem::status, so that the target directory is detected, and no
error is reported.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/101510
* src/c++17/fs_ops.cc (fs::create_directories): Use status
instead of symlink_status.
* src/filesystem/ops.cc (fs::create_directories): Likewise.
* testsuite/27_io/filesystem/operations/create_directories.cc:
* testsuite/27_io/filesystem/operations/create_directory.cc: Do
not test with symlinks on Windows.
* testsuite/experimental/filesystem/operations/create_directories.cc:
* testsuite/experimental/filesystem/operations/create_directory.cc:
Do not test with symlinks on Windows.
This patch updates the vector long long multiply and divide tests to
supply the correct code information if power10 code generation is used.
2021-06-18 Michael Meissner <meissner@linux.ibm.com>
gcc/testsuite/
PR testsuite/100167
* gcc.target/powerpc/fold-vec-div-longlong.c: Fix expected code
generation on power10.
* gcc.target/powerpc/fold-vec-mult-longlong.c: Likewise.
The following gcc.dg/pr101384.c testcase is miscompiled on
powerpc64le-linux.
easy_altivec_constant has code to try construct vector constants with
different element sizes, perhaps different from CONST_VECTOR's mode. But as
written, that works fine for vspltis[bhw] cases, but not for the vspltisw
x,-1; vsl[bhw] x,x,x case, because that creates always a V16QImode, V8HImode
or V4SImode constant containing broadcasted constant with just the MSB set.
The vspltis_constant function etc. expects the vspltis[bhw] instructions
where the small [-16..15] or even [-32..30] constant is sign-extended to the
remaining step bytes, but that is not the case for the 0x80...00 constants,
with step > 1 we can't handle e.g.
{ 0x80, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff }
vectors but do want to handle e.g.
{ 0, 0, 0, 0x80, 0, 0, 0, 0x80, 0, 0, 0, 0x80, 0, 0, 0, 0x80 }
and similarly with copies > 1 we do want to handle e.g.
{ 0x80808080, 0x80808080, 0x80808080, 0x80808080 }.
2021-07-20 Jakub Jelinek <jakub@redhat.com>
PR target/101384
* config/rs6000/rs6000-protos.h (easy_altivec_constant): Change return
type from bool to int.
* config/rs6000/rs6000.c (vspltis_constant): Fix up handling the
EASY_VECTOR_MSB case if either step or copies is not 1.
(vspltis_shifted): Fix comment typo.
(easy_altivec_constant): Change return type from bool to int, instead
of returning true return byte size of the element mode that should be
used to synthetize the constant.
* config/rs6000/predicates.md (easy_vector_constant_msb): Require
that vspltis_shifted is 0, handle the case where easy_altivec_constant
assumes using different vector mode from CONST_VECTOR's mode.
* config/rs6000/altivec.md (easy_vector_constant_msb splitter): Use
easy_altivec_constant to determine mode in which -1 >> -1 should be
performed, use rs6000_expand_vector_init instead of gen_vec_initv4sisi.
* gcc.dg/pr101384.c: New test.
* gcc.target/powerpc/pr101384-1.c: New test.
* gcc.target/powerpc/pr101384-2.c: New test.
The recent change to _Hashtable_ebo_helper for this PR broke the
is_default_constructible trait for a hash container with a non-default
constructible allocator. That happens because the constructor needs to
be user-provided in order to initialize the member, and so is not
defined as deleted when the type is not default constructible.
By making _Hashtable derive from _Enable_special_members we can ensure
that the default constructor for the std::unordered_xxx containers is
deleted when it would be ill-formed. This makes the trait give the
correct answer.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/100863
* include/bits/hashtable.h (_Hashtable): Conditionally delete
default constructor by deriving from _Enable_special_members.
* testsuite/23_containers/unordered_map/cons/default.cc: New test.
* testsuite/23_containers/unordered_set/cons/default.cc: New test.
I'm not sure what these test were originally designed to test.
vaddv and vmaxv seem to be testing for vectorisation, with associated
scan-assembler tests. But they use arm_neon.h functions to test
the results, which would presumably also trip many of the scans.
That was probably what the split into vect-fmax-fmin.c and
vect-fmaxv-fminv-compile.c was supposed to avoid.
Anyway, the tests started failing after the recent change to allow
staged reductions for epilogue loops. And epilogues came into play
because the reduction loops iterate LANES-1 rather than LANES times.
(vmaxv was trying to iterate LANES times, but the gimple optimisers
outsmarted it. The other two explicitly had a count of LANES-1.)
Just suppressing epilogues causes other issues for vaddv and vmaxv.
The easiest fix therefore seemed to be to use an asm to hide the
initial value of the vmaxv loop (so that it really does iterate
LANES times) and then make the others match that style.
gcc/testsuite/
PR testsuite/101506
* gcc.target/aarch64/vect-vmaxv.c: Use an asm to hide the
true initial value of the reduction from the vectorizer.
* gcc.target/aarch64/vect-vaddv.c: Likewise. Make the vector
loop operate on exactly LANES (rather than LANES-1) iterations.
* gcc.target/aarch64/vect-fmaxv-fminv.x: Likewise.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/101510
* src/c++17/fs_ops.cc (create_dir): Adjust whitespace.
* testsuite/27_io/filesystem/operations/create_directory.cc:
Test creating directory with name of existing symlink to
directory.
* testsuite/experimental/filesystem/operations/create_directory.cc:
Likewise.
The following makes sure to apply the debug prefix maps to filenames
before checksumming DIEs to create the global symbol for the CU DIE
used by LTO to link the late debug to the early debug. This avoids
binary differences (in said symbol) when compiling with toolchains
installed under a different path and that compensated with appropriate
-fdebug-prefix-map options.
The easiest and most scalable way is to record both the unmapped
and the remapped filename in the dwarf_file_data so the remapping
process takes place at a single point and only once (otherwise it
creates GC garbage at each point doing that).
2021-07-20 Richard Biener <rguenther@suse.de>
PR debug/101473
* dwarf2out.h (dwarf_file_data): Add key member.
* dwarf2out.c (dwarf_file_hasher::equal): Compare key.
(dwarf_file_hasher::hash): Hash key.
(lookup_filename): Remap the filename and store it in the
filename member of dwarf_file_data when creating a new
dwarf_file_data.
(file_name_acquire): Do not remap the filename again.
(maybe_emit_file): Likewise.
The current line-length limit is set to 80, but that allows a
character to appear in the 80th column, and that causes emacs to
display a line-wrap followed by a blank line when the display/window
width is 80 columns. Furthermore, this seems to contradict the
coding-style rules on the wiki which suggest that the line limit
should be 79.
So reduce the line width in both the emacs control file and the
contrib vimrc file to 79 characters.
ChangeLog:
* .dir-locals.el (c-mode): Change fill-column to 79.
contrib/ChangeLog:
* vimrc (textwidth): Change non-gitcommit length to 79.
With yesterday's commit 9f2bc5077d "[gcn]
Work-around libgomp 'error: array subscript 0 is outside array bounds of
‘__lds struct gomp_thread * __lds[0]’ [-Werror=array-bounds]' [PR101484]",
I did defuse the "unexpected" '-Werror=array-bounds' diagnostics that we see
as of commit a110855667 "Correct handling of
variable offset minus constant in -Warray-bounds [PR100137]". However, these
'#pragma GCC diagnostic [...]' directives cause some code generation changes
(that seems unexpected, problematic!), which results in a lot (ten thousands)
of 'GCN team arena exhausted' run-time diagnostics, also leading to a few
FAILs:
PASS: libgomp.c/../libgomp.c-c++-common/for-11.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/../libgomp.c-c++-common/for-11.c execution test
PASS: libgomp.c/../libgomp.c-c++-common/for-12.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/../libgomp.c-c++-common/for-12.c execution test
PASS: libgomp.c/../libgomp.c-c++-common/for-3.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/../libgomp.c-c++-common/for-3.c execution test
PASS: libgomp.c/../libgomp.c-c++-common/for-5.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/../libgomp.c-c++-common/for-5.c execution test
PASS: libgomp.c/../libgomp.c-c++-common/for-6.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/../libgomp.c-c++-common/for-6.c execution test
PASS: libgomp.c/../libgomp.c-c++-common/for-9.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/../libgomp.c-c++-common/for-9.c execution test
Same for 'libgomp.c++'.
It remains to be analyzed how '#pragma GCC diagnostic [...]' directives can
cause code generation changes; for now I'm working around the "unexpected"
'-Werror=array-bounds' diagnostics differently.
Overall, still awaiting a different solution, of course.
libgomp/
PR target/101484
* configure.tgt [amdgcn*-*-*] (XCFLAGS): Add
'-Wno-error=array-bounds'.
* config/gcn/team.c: Remove '-Werror=array-bounds' work-around.
* libgomp.h [__AMDGCN__]: Likewise.
This patch is to make Power10 newly introduced vector
multiply high (part) instructions exploited in vectorized
loops, it renames existing define_insns as standard pattern
names. It depends on that patch which enables vectorizer
to recog mul_highpart.
gcc/ChangeLog:
* config/rs6000/vsx.md (mulhs_<mode>): Rename to...
(smul<mode>3_highpart): ... this.
(mulhu_<mode>): Rename to...
(umul<mode>3_highpart): ... this.
* config/rs6000/rs6000-builtin.def (MULHS_V2DI, MULHS_V4SI,
MULHU_V2DI, MULHU_V4SI): Adjust.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/mul-vectorize-3.c: New test.
* gcc.target/powerpc/mul-vectorize-4.c: New test.
This patch is to extend the existing pattern mulhs handlings
to cover normal multiply highpart pattern recognization, it
introduces one new internal function IFN_MULH for 1:1 map to
[su]mul_highpart optab. Since it covers MULT_HIGHPART_EXPR
with optab support, i386 part change is to ensure it follows
the consistent costing path.
Bootstrapped & regtested on powerpc64le-linux-gnu P9,
x86_64-redhat-linux and aarch64-linux-gnu.
gcc/ChangeLog:
PR tree-optimization/100696
* internal-fn.c (first_commutative_argument): Add info for IFN_MULH.
* internal-fn.def (IFN_MULH): New internal function.
* tree-vect-patterns.c (vect_recog_mulhs_pattern): Add support to
recog normal multiply highpart as IFN_MULH.
* config/i386/i386.c (ix86_add_stmt_cost): Adjust for combined
function CFN_MULH.
gcc/testsuite/ChangeLog:
PR tree-optimization/100696
* gcc.target/i386/pr100637-3w.c: Adjust for mul_highpart recog.
If a package declares a method on an alias type, the alias would be
used in the export data. This would then trigger a compiler
assertion on import: we should not be adding methods to aliases.
Fix the problem by ensuring that receiver types do not use alias types.
This seems preferable to consistently avoiding aliases in export data,
as aliases can cross packages. And it's painful to try to patch this
while writing the export data, as at that point all the types are known.
Test case is https://golang.org/cl/335172.
Fixesgolang/go#47131
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/335729
The mechanism used to date for uniquing the coroutine helper
functions (actor, destroy) was over-complicating things and
leading to the noted PR and also difficulties in setting
breakpoints on these functions (so this will help PR99215 as
well).
This implementation delegates the adjustment to the mangling
to write_encoding() which necessitates some book-keeping so
that it is possible to determine which of the coroutine
helper names is to be mangled.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
PR c++/95520 - [coroutines] __builtin_FUNCTION() returns mangled .actor instead of original function name
PR c++/95520
gcc/cp/ChangeLog:
* coroutines.cc (struct coroutine_info): Add fields for
actor and destroy function decls.
(to_ramp): New.
(coro_get_ramp_function): New.
(coro_get_actor_function): New.
(coro_get_destroy_function): New.
(act_des_fn): Set up mapping between ramp, actor and
destroy functions.
(morph_fn_to_coro): Adjust interface to the builder for
helper function decls.
* cp-tree.h (DECL_ACTOR_FN, DECL_DESTROY_FN, DECL_RAMP_FN,
JOIN_STR): New.
* mangle.c (write_encoding): Handle coroutine helpers.
(write_unqualified_name): Handle lambda coroutine helpers.
gcc/testsuite/ChangeLog:
* g++.dg/coroutines/pr95520.C: New test.
PR analyzer/101503 reports an assertion failure due to an unexpected
"UNKNOWN" value (due to using --param analyzer-max-svalue-depth=0).
This patch fixes this by rejecting attempts to purge state involving
unknown/poisoned svalues (in region_model::purge_state_involving),
as these svalues should not have state associated with them - they
are singletons w.r.t each type.
To be more systematic about this, the patch also introduces a new
svalue::can_have_associated_state_p which returns false for
unknown/poisoned svalues, so that we can reject adding constraints
or sm-state on them, or building various kinds of svalue in terms
of them (e.g. unary ops, binary ops, etc).
gcc/analyzer/ChangeLog:
PR analyzer/101503
* constraint-manager.cc (constraint_manager::add_constraint): Use
can_have_associated_state_p rather than testing for unknown.
(constraint_manager::get_or_add_equiv_class): Likewise.
* program-state.cc (sm_state_map::set_state): Likewise.
(sm_state_map::impl_set_state): Add assertion.
* region-model-manager.cc
(region_model_manager::maybe_fold_unaryop): Handle poisoned
values.
(region_model_manager::maybe_fold_binop): Move handling of unknown
values...
(region_model_manager::get_or_create_binop): ...to here, and
generalize to use can_have_associated_state_p.
(region_model_manager::maybe_fold_sub_svalue): Use
can_have_associated_state_p rather than testing for unknown.
(region_model_manager::maybe_fold_repeated_svalue): Use unknown
when the size or repeated value is "unknown"/"poisoned".
* region-model.cc (region_model::purge_state_involving): Reject
attempts to purge unknown/poisoned svalues, as these svalues
should not have state associated with them.
* svalue.cc (sub_svalue::sub_svalue): Assert that we're building
on top of an svalue with can_have_associated_state_p.
(repeated_svalue::repeated_svalue): Likewise.
(bits_within_svalue::bits_within_svalue): Likewise.
* svalue.h (svalue::can_have_associated_state_p): New.
(unknown_svalue::can_have_associated_state_p): New.
(poisoned_svalue::can_have_associated_state_p): New.
(unaryop_svalue::unaryop_svalue): Assert that we're building on
top of an svalue with can_have_associated_state_p.
(binop_svalue::binop_svalue): Likewise.
(widening_svalue::widening_svalue): Likewise.
gcc/testsuite/ChangeLog:
PR analyzer/101503
* gcc.dg/analyzer/pr101503.c: New test.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
CTF/BTF debug formats can be safely enabled for all ELF-based targets by
default in GCC.
CTF/BTF debug formats now adopt a similar approach as taken for DWARF debug
format via the DWARF2_DEBUGGING_INFO.
- By default, CTF/BTF formats can be enabled for all ELF-based targets.
- By default, CTF/BTF formats can be disabled for all non ELF-based targets.
- If the user passed a -gctf but CTF is not enabled for the target, GCC
issues an error to the user (as is done currently with other debug formats) -
"target system does not support the 'ctf' debug format". Analogous behavior
for -gbtf command line option.
A previous commit disabled the CTF and BTF testcases on the AIX platform. This
is not necessary now that CTF and BTF debug formats are disabled by default on
all non-ELF targets. GCC emits an error message when -gctf/-gbtf is used on
such platforms and these tests will be skipped.
gcc/
* config/elfos.h (CTF_DEBUGGING_INFO): New definition.
(BTF_DEBUGGING_INFO): Likewise.
* doc/tm.texi.in: Document the new macros.
* doc/tm.texi: Regenerated.
* toplev.c: Guard initialization of debug hooks.
gcc/testsuite/
* gcc.dg/debug/btf/btf.exp: Do not run BTF testsuite if target does not
support BTF format. Remove redundant check for AIX.
* gcc.dg/debug/ctf/ctf.exp: Do not run CTF testsuite if target does not
support CTF format. Remove redundant check for AIX.
* lib/gcc-dg.exp: Remove redundant check for AIX.
So the problem is even though there was a csneg with
a zero_extend in the front, there was not one for csinv.
This fixes it by extending that pattern.
OK? Bootstrapped and tested on aarch64-linux-gnu with no regressions.
gcc/ChangeLog:
PR target/101205
* config/aarch64/aarch64.md (csneg3_uxtw_insn): Rename to ...
(*cs<neg_not_cs>3_uxtw_insn4): and extend to NEG_NOT.
gcc/testsuite/ChangeLog:
PR target/101205
* gcc.target/aarch64/csinv-neg-1.c: New test.
Loop vectorization pattern recog fails to walk PHIs when determining
stmt precisions. This fails to recognize non-mask uses for bools
in PHIs and outer loop vectorization.
2021-07-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/101505
* tree-vect-patterns.c (vect_determine_precisions): Walk
PHIs also for loop vectorization.
* gcc.dg/vect/pr101505.c: New testcase.
... seen as of commit a110855667 "Correct
handling of variable offset minus constant in -Warray-bounds [PR100137]".
Awaiting a different solution, of course.
libgomp/
PR target/101484
* config/gcn/team.c: Apply '-Werror=array-bounds' work-around.
* libgomp.h [__AMDGCN__]: Likewise.
This removes the last uses of gimple_expr_type.
2021-07-16 Richard Biener <rguenther@suse.de>
* tree-ssa-sccvn.c (vn_reference_eq): Handle NULL vr->type.
(ao_ref_init_from_vn_reference): Likewise.
(fully_constant_reference): Likewise.
(vn_reference_lookup_call): Do not set vr->type to random
values.
* tree-ssa-pre.c (compute_avail): Do not try to PRE calls
without a value.
* tree-vect-generic.c (expand_vector_piecewise): Pass in
whether we expanded parallel.
(expand_vector_parallel): Adjust.
(expand_vector_addition): Likewise.
(expand_vector_comparison): Likewise.
(expand_vector_operation): Likewise.
(expand_vector_scalar_condition): Likewise.
(expand_vector_conversion): Likewise.
This removes the last uses from value-range code.
2021-07-16 Richard Biener <rguenther@suse.de>
* tree-vrp.c (register_edge_assert_for_2): Use the
type from the LHS.
(vrp_folder::fold_predicate_in): Likewise.
* vr-values.c (gimple_assign_nonzero_p): Likewise.
(vr_values::extract_range_from_comparison): Likewise.
(vr_values::extract_range_from_ubsan_builtin): Use the
type of the first operand.
(vr_values::extract_range_basic): Push down type
computation, use the appropriate LHS.
(vr_values::extract_range_from_assignment): Use the
type of the LHS.
For -mgeneral-regs-only, enable the GPR only instructions which are
enabled implicitly by SSE ISAs unless they have been disabled explicitly.
gcc/
PR target/101492
* common/config/i386/i386-common.c (ix86_handle_option): For
-mgeneral-regs-only, enable the GPR only instructions which are
enabled implicitly by SSE ISAs unless they have been disabled
explicitly.
gcc/testsuite/
PR target/101492
* gcc.target/i386/pr101492-1.c: New test.
* gcc.target/i386/pr101492-2.c: Likewise.
* gcc.target/i386/pr101492-3.c: Likewise.
* gcc.target/i386/pr101492-4.c: Likewise.
