mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 04:38:03 +00:00
cddda6f5f4
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://msgid.link/r/639e796b36815a219ff1172cc758ba7378211d74.1701778038.git.u.kleine-koenig@pengutronix.de Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
367 lines
9.2 KiB
C
367 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ROHM BD9571MWV-M and BD9574MWF-M regulator driver
|
|
*
|
|
* Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
|
|
*
|
|
* Based on the TPS65086 driver
|
|
*
|
|
* NOTE: VD09 is missing
|
|
*/
|
|
|
|
#include <linux/mfd/rohm-generic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/mfd/bd9571mwv.h>
|
|
|
|
struct bd9571mwv_reg {
|
|
struct regmap *regmap;
|
|
|
|
/* DDR Backup Power */
|
|
u8 bkup_mode_cnt_keepon; /* from "rohm,ddr-backup-power" */
|
|
u8 bkup_mode_cnt_saved;
|
|
bool bkup_mode_enabled;
|
|
|
|
/* Power switch type */
|
|
bool rstbmode_level;
|
|
bool rstbmode_pulse;
|
|
};
|
|
|
|
enum bd9571mwv_regulators { VD09, VD18, VD25, VD33, DVFS };
|
|
|
|
#define BD9571MWV_REG(_name, _of, _id, _ops, _vr, _vm, _nv, _min, _step, _lmin)\
|
|
{ \
|
|
.name = _name, \
|
|
.of_match = of_match_ptr(_of), \
|
|
.regulators_node = "regulators", \
|
|
.id = _id, \
|
|
.ops = &_ops, \
|
|
.n_voltages = _nv, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.vsel_reg = _vr, \
|
|
.vsel_mask = _vm, \
|
|
.min_uV = _min, \
|
|
.uV_step = _step, \
|
|
.linear_min_sel = _lmin, \
|
|
}
|
|
|
|
static int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, BD9571MWV_AVS_SET_MONI, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
return val & BD9571MWV_AVS_SET_MONI_MASK;
|
|
}
|
|
|
|
static int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
|
|
unsigned int sel)
|
|
{
|
|
int ret;
|
|
|
|
ret = bd9571mwv_avs_get_moni_state(rdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return regmap_write_bits(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret),
|
|
rdev->desc->vsel_mask, sel);
|
|
}
|
|
|
|
static int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = bd9571mwv_avs_get_moni_state(rdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_read(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret), &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
val &= rdev->desc->vsel_mask;
|
|
val >>= ffs(rdev->desc->vsel_mask) - 1;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
|
|
unsigned int sel)
|
|
{
|
|
return regmap_write_bits(rdev->regmap, BD9571MWV_DVFS_SETVID,
|
|
rdev->desc->vsel_mask, sel);
|
|
}
|
|
|
|
/* Operations permitted on AVS voltage regulator */
|
|
static const struct regulator_ops avs_ops = {
|
|
.set_voltage_sel = bd9571mwv_avs_set_voltage_sel_regmap,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = bd9571mwv_avs_get_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
/* Operations permitted on voltage regulators */
|
|
static const struct regulator_ops reg_ops = {
|
|
.set_voltage_sel = bd9571mwv_reg_set_voltage_sel_regmap,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
/* Operations permitted on voltage monitors */
|
|
static const struct regulator_ops vid_ops = {
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
static const struct regulator_desc regulators[] = {
|
|
BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f,
|
|
0x6f, 600000, 10000, 0x3c),
|
|
BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf,
|
|
16, 1625000, 25000, 0),
|
|
BD9571MWV_REG("VD25", "vd25", VD25, vid_ops, BD9571MWV_VD25_VID, 0xf,
|
|
16, 2150000, 50000, 0),
|
|
BD9571MWV_REG("VD33", "vd33", VD33, vid_ops, BD9571MWV_VD33_VID, 0xf,
|
|
11, 2800000, 100000, 0),
|
|
BD9571MWV_REG("DVFS", "dvfs", DVFS, reg_ops,
|
|
BD9571MWV_DVFS_MONIVDAC, 0x7f,
|
|
0x6f, 600000, 10000, 0x3c),
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int bd9571mwv_bkup_mode_read(struct bd9571mwv_reg *bdreg,
|
|
unsigned int *mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_read(bdreg->regmap, BD9571MWV_BKUP_MODE_CNT, mode);
|
|
if (ret) {
|
|
dev_err(regmap_get_device(bdreg->regmap),
|
|
"failed to read backup mode (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd9571mwv_bkup_mode_write(struct bd9571mwv_reg *bdreg,
|
|
unsigned int mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(bdreg->regmap, BD9571MWV_BKUP_MODE_CNT, mode);
|
|
if (ret) {
|
|
dev_err(regmap_get_device(bdreg->regmap),
|
|
"failed to configure backup mode 0x%x (%d)\n",
|
|
mode, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t backup_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
|
|
|
|
return sysfs_emit(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off");
|
|
}
|
|
|
|
static ssize_t backup_mode_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
|
|
unsigned int mode;
|
|
int ret;
|
|
|
|
if (!count)
|
|
return 0;
|
|
|
|
ret = kstrtobool(buf, &bdreg->bkup_mode_enabled);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!bdreg->rstbmode_level)
|
|
return count;
|
|
|
|
/*
|
|
* Configure DDR Backup Mode, to change the role of the accessory power
|
|
* switch from a power switch to a wake-up switch, or vice versa
|
|
*/
|
|
ret = bd9571mwv_bkup_mode_read(bdreg, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
|
|
if (bdreg->bkup_mode_enabled)
|
|
mode |= bdreg->bkup_mode_cnt_keepon;
|
|
|
|
ret = bd9571mwv_bkup_mode_write(bdreg, mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(backup_mode);
|
|
|
|
static int bd9571mwv_suspend(struct device *dev)
|
|
{
|
|
struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
|
|
unsigned int mode;
|
|
int ret;
|
|
|
|
if (!bdreg->bkup_mode_enabled)
|
|
return 0;
|
|
|
|
/* Save DDR Backup Mode */
|
|
ret = bd9571mwv_bkup_mode_read(bdreg, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bdreg->bkup_mode_cnt_saved = mode;
|
|
|
|
if (!bdreg->rstbmode_pulse)
|
|
return 0;
|
|
|
|
/* Enable DDR Backup Mode */
|
|
mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
|
|
mode |= bdreg->bkup_mode_cnt_keepon;
|
|
|
|
if (mode != bdreg->bkup_mode_cnt_saved)
|
|
return bd9571mwv_bkup_mode_write(bdreg, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd9571mwv_resume(struct device *dev)
|
|
{
|
|
struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
|
|
|
|
if (!bdreg->bkup_mode_enabled)
|
|
return 0;
|
|
|
|
/* Restore DDR Backup Mode */
|
|
return bd9571mwv_bkup_mode_write(bdreg, bdreg->bkup_mode_cnt_saved);
|
|
}
|
|
|
|
static const struct dev_pm_ops bd9571mwv_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(bd9571mwv_suspend, bd9571mwv_resume)
|
|
};
|
|
|
|
static void bd9571mwv_regulator_remove(struct platform_device *pdev)
|
|
{
|
|
device_remove_file(&pdev->dev, &dev_attr_backup_mode);
|
|
}
|
|
#define DEV_PM_OPS &bd9571mwv_pm
|
|
#else
|
|
#define DEV_PM_OPS NULL
|
|
#define bd9571mwv_regulator_remove NULL
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static int bd9571mwv_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct regulator_config config = { };
|
|
struct bd9571mwv_reg *bdreg;
|
|
struct regulator_dev *rdev;
|
|
unsigned int val;
|
|
int i;
|
|
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
|
|
|
|
bdreg = devm_kzalloc(&pdev->dev, sizeof(*bdreg), GFP_KERNEL);
|
|
if (!bdreg)
|
|
return -ENOMEM;
|
|
|
|
bdreg->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
|
|
platform_set_drvdata(pdev, bdreg);
|
|
|
|
config.dev = &pdev->dev;
|
|
config.dev->of_node = pdev->dev.parent->of_node;
|
|
config.driver_data = bdreg;
|
|
config.regmap = bdreg->regmap;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(regulators); i++) {
|
|
/* BD9574MWF supports DVFS only */
|
|
if (chip == ROHM_CHIP_TYPE_BD9574 && regulators[i].id != DVFS)
|
|
continue;
|
|
rdev = devm_regulator_register(&pdev->dev, ®ulators[i],
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev, "failed to register %s regulator\n",
|
|
regulators[i].name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
val = 0;
|
|
of_property_read_u32(config.dev->of_node, "rohm,ddr-backup-power", &val);
|
|
if (val & ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK) {
|
|
dev_err(&pdev->dev, "invalid %s mode %u\n",
|
|
"rohm,ddr-backup-power", val);
|
|
return -EINVAL;
|
|
}
|
|
bdreg->bkup_mode_cnt_keepon = val;
|
|
|
|
bdreg->rstbmode_level = of_property_read_bool(config.dev->of_node,
|
|
"rohm,rstbmode-level");
|
|
bdreg->rstbmode_pulse = of_property_read_bool(config.dev->of_node,
|
|
"rohm,rstbmode-pulse");
|
|
if (bdreg->rstbmode_level && bdreg->rstbmode_pulse) {
|
|
dev_err(&pdev->dev, "only one rohm,rstbmode-* may be specified");
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
if (bdreg->bkup_mode_cnt_keepon) {
|
|
int ret;
|
|
|
|
/*
|
|
* Backup mode is enabled by default in pulse mode, but needs
|
|
* explicit user setup in level mode.
|
|
*/
|
|
bdreg->bkup_mode_enabled = bdreg->rstbmode_pulse;
|
|
|
|
ret = device_create_file(&pdev->dev, &dev_attr_backup_mode);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id bd9571mwv_regulator_id_table[] = {
|
|
{ "bd9571mwv-regulator", ROHM_CHIP_TYPE_BD9571 },
|
|
{ "bd9574mwf-regulator", ROHM_CHIP_TYPE_BD9574 },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, bd9571mwv_regulator_id_table);
|
|
|
|
static struct platform_driver bd9571mwv_regulator_driver = {
|
|
.driver = {
|
|
.name = "bd9571mwv-regulator",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.pm = DEV_PM_OPS,
|
|
},
|
|
.probe = bd9571mwv_regulator_probe,
|
|
.remove_new = bd9571mwv_regulator_remove,
|
|
.id_table = bd9571mwv_regulator_id_table,
|
|
};
|
|
module_platform_driver(bd9571mwv_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
|
|
MODULE_DESCRIPTION("BD9571MWV Regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|