mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 04:38:03 +00:00
3555f8ff30
Instead of using regmap_update_bits() and passing val=0, better use regmap_clear_bits(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240606164047.534741-6-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
242 lines
6.5 KiB
C
242 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Analog Devices AXI PWM generator
|
|
*
|
|
* Copyright 2024 Analog Devices Inc.
|
|
* Copyright 2024 Baylibre SAS
|
|
*
|
|
* Device docs: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html
|
|
*
|
|
* Limitations:
|
|
* - The writes to registers for period and duty are shadowed until
|
|
* LOAD_CONFIG is written to AXI_PWMGEN_REG_CONFIG, at which point
|
|
* they take effect.
|
|
* - Writing LOAD_CONFIG also has the effect of re-synchronizing all
|
|
* enabled channels, which could cause glitching on other channels. It
|
|
* is therefore expected that channels are assigned harmonic periods
|
|
* and all have a single user coordinating this.
|
|
* - Supports normal polarity. Does not support changing polarity.
|
|
* - On disable, the PWM output becomes low (inactive).
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/fpga/adi-axi-common.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define AXI_PWMGEN_REG_CORE_VERSION 0x00
|
|
#define AXI_PWMGEN_REG_ID 0x04
|
|
#define AXI_PWMGEN_REG_SCRATCHPAD 0x08
|
|
#define AXI_PWMGEN_REG_CORE_MAGIC 0x0C
|
|
#define AXI_PWMGEN_REG_CONFIG 0x10
|
|
#define AXI_PWMGEN_REG_NPWM 0x14
|
|
#define AXI_PWMGEN_CHX_PERIOD(ch) (0x40 + (4 * (ch)))
|
|
#define AXI_PWMGEN_CHX_DUTY(ch) (0x80 + (4 * (ch)))
|
|
#define AXI_PWMGEN_CHX_OFFSET(ch) (0xC0 + (4 * (ch)))
|
|
#define AXI_PWMGEN_REG_CORE_MAGIC_VAL 0x601A3471 /* Identification number to test during setup */
|
|
#define AXI_PWMGEN_LOAD_CONFIG BIT(1)
|
|
#define AXI_PWMGEN_REG_CONFIG_RESET BIT(0)
|
|
|
|
struct axi_pwmgen_ddata {
|
|
struct regmap *regmap;
|
|
unsigned long clk_rate_hz;
|
|
};
|
|
|
|
static const struct regmap_config axi_pwmgen_regmap_config = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
};
|
|
|
|
static int axi_pwmgen_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct axi_pwmgen_ddata *ddata = pwmchip_get_drvdata(chip);
|
|
unsigned int ch = pwm->hwpwm;
|
|
struct regmap *regmap = ddata->regmap;
|
|
u64 period_cnt, duty_cnt;
|
|
int ret;
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (state->enabled) {
|
|
period_cnt = mul_u64_u64_div_u64(state->period, ddata->clk_rate_hz, NSEC_PER_SEC);
|
|
if (period_cnt > UINT_MAX)
|
|
period_cnt = UINT_MAX;
|
|
|
|
if (period_cnt == 0)
|
|
return -EINVAL;
|
|
|
|
ret = regmap_write(regmap, AXI_PWMGEN_CHX_PERIOD(ch), period_cnt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
duty_cnt = mul_u64_u64_div_u64(state->duty_cycle, ddata->clk_rate_hz, NSEC_PER_SEC);
|
|
if (duty_cnt > UINT_MAX)
|
|
duty_cnt = UINT_MAX;
|
|
|
|
ret = regmap_write(regmap, AXI_PWMGEN_CHX_DUTY(ch), duty_cnt);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
ret = regmap_write(regmap, AXI_PWMGEN_CHX_PERIOD(ch), 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(regmap, AXI_PWMGEN_CHX_DUTY(ch), 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return regmap_write(regmap, AXI_PWMGEN_REG_CONFIG, AXI_PWMGEN_LOAD_CONFIG);
|
|
}
|
|
|
|
static int axi_pwmgen_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct axi_pwmgen_ddata *ddata = pwmchip_get_drvdata(chip);
|
|
struct regmap *regmap = ddata->regmap;
|
|
unsigned int ch = pwm->hwpwm;
|
|
u32 cnt;
|
|
int ret;
|
|
|
|
ret = regmap_read(regmap, AXI_PWMGEN_CHX_PERIOD(ch), &cnt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
state->enabled = cnt != 0;
|
|
|
|
state->period = DIV_ROUND_UP_ULL((u64)cnt * NSEC_PER_SEC, ddata->clk_rate_hz);
|
|
|
|
ret = regmap_read(regmap, AXI_PWMGEN_CHX_DUTY(ch), &cnt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
state->duty_cycle = DIV_ROUND_UP_ULL((u64)cnt * NSEC_PER_SEC, ddata->clk_rate_hz);
|
|
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops axi_pwmgen_pwm_ops = {
|
|
.apply = axi_pwmgen_apply,
|
|
.get_state = axi_pwmgen_get_state,
|
|
};
|
|
|
|
static int axi_pwmgen_setup(struct regmap *regmap, struct device *dev)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = regmap_read(regmap, AXI_PWMGEN_REG_CORE_MAGIC, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val != AXI_PWMGEN_REG_CORE_MAGIC_VAL)
|
|
return dev_err_probe(dev, -ENODEV,
|
|
"failed to read expected value from register: got %08x, expected %08x\n",
|
|
val, AXI_PWMGEN_REG_CORE_MAGIC_VAL);
|
|
|
|
ret = regmap_read(regmap, AXI_PWMGEN_REG_CORE_VERSION, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (ADI_AXI_PCORE_VER_MAJOR(val) != 2) {
|
|
return dev_err_probe(dev, -ENODEV, "Unsupported peripheral version %u.%u.%u\n",
|
|
ADI_AXI_PCORE_VER_MAJOR(val),
|
|
ADI_AXI_PCORE_VER_MINOR(val),
|
|
ADI_AXI_PCORE_VER_PATCH(val));
|
|
}
|
|
|
|
/* Enable the core */
|
|
ret = regmap_clear_bits(regmap, AXI_PWMGEN_REG_CONFIG, AXI_PWMGEN_REG_CONFIG_RESET);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(regmap, AXI_PWMGEN_REG_NPWM, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Return the number of PWMs */
|
|
return val;
|
|
}
|
|
|
|
static int axi_pwmgen_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct regmap *regmap;
|
|
struct pwm_chip *chip;
|
|
struct axi_pwmgen_ddata *ddata;
|
|
struct clk *clk;
|
|
void __iomem *io_base;
|
|
int ret;
|
|
|
|
io_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(io_base))
|
|
return PTR_ERR(io_base);
|
|
|
|
regmap = devm_regmap_init_mmio(dev, io_base, &axi_pwmgen_regmap_config);
|
|
if (IS_ERR(regmap))
|
|
return dev_err_probe(dev, PTR_ERR(regmap),
|
|
"failed to init register map\n");
|
|
|
|
ret = axi_pwmgen_setup(regmap, dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
chip = devm_pwmchip_alloc(dev, ret, sizeof(*ddata));
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
ddata = pwmchip_get_drvdata(chip);
|
|
ddata->regmap = regmap;
|
|
|
|
clk = devm_clk_get_enabled(dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
|
|
|
|
ret = devm_clk_rate_exclusive_get(dev, clk);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to get exclusive rate\n");
|
|
|
|
ddata->clk_rate_hz = clk_get_rate(clk);
|
|
if (!ddata->clk_rate_hz || ddata->clk_rate_hz > NSEC_PER_SEC)
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"Invalid clock rate: %lu\n", ddata->clk_rate_hz);
|
|
|
|
chip->ops = &axi_pwmgen_pwm_ops;
|
|
chip->atomic = true;
|
|
|
|
ret = devm_pwmchip_add(dev, chip);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "could not add PWM chip\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id axi_pwmgen_ids[] = {
|
|
{ .compatible = "adi,axi-pwmgen-2.00.a" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axi_pwmgen_ids);
|
|
|
|
static struct platform_driver axi_pwmgen_driver = {
|
|
.driver = {
|
|
.name = "axi-pwmgen",
|
|
.of_match_table = axi_pwmgen_ids,
|
|
},
|
|
.probe = axi_pwmgen_probe,
|
|
};
|
|
module_platform_driver(axi_pwmgen_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Sergiu Cuciurean <sergiu.cuciurean@analog.com>");
|
|
MODULE_AUTHOR("Trevor Gamblin <tgamblin@baylibre.com>");
|
|
MODULE_DESCRIPTION("Driver for the Analog Devices AXI PWM generator");
|