mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 04:38:03 +00:00
758b62e562
SG2042 use an external MCU to provide basic hardware information and thermal sensors. Add driver support for the onboard MCU of SG2042. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Message-ID: <IA1PR20MB49536C786048D1E676BB9C20BB822@IA1PR20MB4953.namprd20.prod.outlook.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
79 lines
2.6 KiB
ReStructuredText
79 lines
2.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver sg2042-mcu
|
|
========================
|
|
|
|
Supported chips:
|
|
|
|
* Onboard MCU for sg2042
|
|
|
|
Addresses scanned: -
|
|
|
|
Prefix: 'sg2042-mcu'
|
|
|
|
Authors:
|
|
|
|
- Inochi Amaoto <inochiama@outlook.com>
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver supprts hardware monitoring for onboard MCU with
|
|
i2c interface.
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not auto-detect devices. You will have to instantiate
|
|
the devices explicitly.
|
|
Please see Documentation/i2c/instantiating-devices.rst for details.
|
|
|
|
Sysfs Attributes
|
|
----------------
|
|
|
|
The following table shows the standard entries support by the driver:
|
|
|
|
================= =====================================================
|
|
Name Description
|
|
================= =====================================================
|
|
temp1_input Measured temperature of SoC
|
|
temp1_crit Critical high temperature
|
|
temp1_crit_hyst hysteresis temperature restore from Critical
|
|
temp2_input Measured temperature of the base board
|
|
================= =====================================================
|
|
|
|
The following table shows the extra entries support by the driver
|
|
(the MCU device is in i2c subsystem):
|
|
|
|
================= ======= =============================================
|
|
Name Perm Description
|
|
================= ======= =============================================
|
|
reset_count RO Reset count of the SoC
|
|
uptime RO Seconds after the MCU is powered
|
|
reset_reason RO Reset reason for the last reset
|
|
repower_policy RW Execution policy when triggering repower
|
|
================= ======= =============================================
|
|
|
|
``repower_policy``
|
|
The repower is triggered when the temperature of the SoC falls below
|
|
the hysteresis temperature after triggering a shutdown due to
|
|
reaching the critical temperature.
|
|
The valid values for this entry are "repower" and "keep". "keep" will
|
|
leave the SoC down when the triggering repower, and "repower" will
|
|
boot the SoC.
|
|
|
|
Debugfs Interfaces
|
|
------------------
|
|
|
|
If debugfs is available, this driver exposes some hardware specific
|
|
data in ``/sys/kernel/debug/sg2042-mcu/*/``.
|
|
|
|
================= ======= =============================================
|
|
Name Format Description
|
|
================= ======= =============================================
|
|
firmware_version 0x%02x firmware version of the MCU
|
|
pcb_version 0x%02x version number of the base board
|
|
board_type 0x%02x identifiers for the base board
|
|
mcu_type %d type of the MCU: 0 is STM32, 1 is GD32
|
|
================= ======= =============================================
|