mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 11:35:45 +00:00
5c2b050848
- Tree wide: * Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. - Core code: * Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. * Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. * Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. * Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. - Drivers: * New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips * Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. * Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. * Small cleanups and fixes all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R XmTOYW3U9XR3gw== =JqxC -----END PGP SIGNATURE----- Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...
1069 lines
25 KiB
C
1069 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/kernel/softirq.c
|
|
*
|
|
* Copyright (C) 1992 Linus Torvalds
|
|
*
|
|
* Rewritten. Old one was good in 2.2, but in 2.3 it was immoral. --ANK (990903)
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/local_lock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/rcupdate.h>
|
|
#include <linux/ftrace.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/smpboot.h>
|
|
#include <linux/tick.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/wait_bit.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <asm/softirq_stack.h>
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/irq.h>
|
|
|
|
/*
|
|
- No shared variables, all the data are CPU local.
|
|
- If a softirq needs serialization, let it serialize itself
|
|
by its own spinlocks.
|
|
- Even if softirq is serialized, only local cpu is marked for
|
|
execution. Hence, we get something sort of weak cpu binding.
|
|
Though it is still not clear, will it result in better locality
|
|
or will not.
|
|
|
|
Examples:
|
|
- NET RX softirq. It is multithreaded and does not require
|
|
any global serialization.
|
|
- NET TX softirq. It kicks software netdevice queues, hence
|
|
it is logically serialized per device, but this serialization
|
|
is invisible to common code.
|
|
- Tasklets: serialized wrt itself.
|
|
*/
|
|
|
|
#ifndef __ARCH_IRQ_STAT
|
|
DEFINE_PER_CPU_ALIGNED(irq_cpustat_t, irq_stat);
|
|
EXPORT_PER_CPU_SYMBOL(irq_stat);
|
|
#endif
|
|
|
|
static struct softirq_action softirq_vec[NR_SOFTIRQS] __cacheline_aligned_in_smp;
|
|
|
|
DEFINE_PER_CPU(struct task_struct *, ksoftirqd);
|
|
|
|
const char * const softirq_to_name[NR_SOFTIRQS] = {
|
|
"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "IRQ_POLL",
|
|
"TASKLET", "SCHED", "HRTIMER", "RCU"
|
|
};
|
|
|
|
/*
|
|
* we cannot loop indefinitely here to avoid userspace starvation,
|
|
* but we also don't want to introduce a worst case 1/HZ latency
|
|
* to the pending events, so lets the scheduler to balance
|
|
* the softirq load for us.
|
|
*/
|
|
static void wakeup_softirqd(void)
|
|
{
|
|
/* Interrupts are disabled: no need to stop preemption */
|
|
struct task_struct *tsk = __this_cpu_read(ksoftirqd);
|
|
|
|
if (tsk)
|
|
wake_up_process(tsk);
|
|
}
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
DEFINE_PER_CPU(int, hardirqs_enabled);
|
|
DEFINE_PER_CPU(int, hardirq_context);
|
|
EXPORT_PER_CPU_SYMBOL_GPL(hardirqs_enabled);
|
|
EXPORT_PER_CPU_SYMBOL_GPL(hardirq_context);
|
|
#endif
|
|
|
|
/*
|
|
* SOFTIRQ_OFFSET usage:
|
|
*
|
|
* On !RT kernels 'count' is the preempt counter, on RT kernels this applies
|
|
* to a per CPU counter and to task::softirqs_disabled_cnt.
|
|
*
|
|
* - count is changed by SOFTIRQ_OFFSET on entering or leaving softirq
|
|
* processing.
|
|
*
|
|
* - count is changed by SOFTIRQ_DISABLE_OFFSET (= 2 * SOFTIRQ_OFFSET)
|
|
* on local_bh_disable or local_bh_enable.
|
|
*
|
|
* This lets us distinguish between whether we are currently processing
|
|
* softirq and whether we just have bh disabled.
|
|
*/
|
|
#ifdef CONFIG_PREEMPT_RT
|
|
|
|
/*
|
|
* RT accounts for BH disabled sections in task::softirqs_disabled_cnt and
|
|
* also in per CPU softirq_ctrl::cnt. This is necessary to allow tasks in a
|
|
* softirq disabled section to be preempted.
|
|
*
|
|
* The per task counter is used for softirq_count(), in_softirq() and
|
|
* in_serving_softirqs() because these counts are only valid when the task
|
|
* holding softirq_ctrl::lock is running.
|
|
*
|
|
* The per CPU counter prevents pointless wakeups of ksoftirqd in case that
|
|
* the task which is in a softirq disabled section is preempted or blocks.
|
|
*/
|
|
struct softirq_ctrl {
|
|
local_lock_t lock;
|
|
int cnt;
|
|
};
|
|
|
|
static DEFINE_PER_CPU(struct softirq_ctrl, softirq_ctrl) = {
|
|
.lock = INIT_LOCAL_LOCK(softirq_ctrl.lock),
|
|
};
|
|
|
|
/**
|
|
* local_bh_blocked() - Check for idle whether BH processing is blocked
|
|
*
|
|
* Returns false if the per CPU softirq::cnt is 0 otherwise true.
|
|
*
|
|
* This is invoked from the idle task to guard against false positive
|
|
* softirq pending warnings, which would happen when the task which holds
|
|
* softirq_ctrl::lock was the only running task on the CPU and blocks on
|
|
* some other lock.
|
|
*/
|
|
bool local_bh_blocked(void)
|
|
{
|
|
return __this_cpu_read(softirq_ctrl.cnt) != 0;
|
|
}
|
|
|
|
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
|
|
{
|
|
unsigned long flags;
|
|
int newcnt;
|
|
|
|
WARN_ON_ONCE(in_hardirq());
|
|
|
|
/* First entry of a task into a BH disabled section? */
|
|
if (!current->softirq_disable_cnt) {
|
|
if (preemptible()) {
|
|
local_lock(&softirq_ctrl.lock);
|
|
/* Required to meet the RCU bottomhalf requirements. */
|
|
rcu_read_lock();
|
|
} else {
|
|
DEBUG_LOCKS_WARN_ON(this_cpu_read(softirq_ctrl.cnt));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Track the per CPU softirq disabled state. On RT this is per CPU
|
|
* state to allow preemption of bottom half disabled sections.
|
|
*/
|
|
newcnt = __this_cpu_add_return(softirq_ctrl.cnt, cnt);
|
|
/*
|
|
* Reflect the result in the task state to prevent recursion on the
|
|
* local lock and to make softirq_count() & al work.
|
|
*/
|
|
current->softirq_disable_cnt = newcnt;
|
|
|
|
if (IS_ENABLED(CONFIG_TRACE_IRQFLAGS) && newcnt == cnt) {
|
|
raw_local_irq_save(flags);
|
|
lockdep_softirqs_off(ip);
|
|
raw_local_irq_restore(flags);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(__local_bh_disable_ip);
|
|
|
|
static void __local_bh_enable(unsigned int cnt, bool unlock)
|
|
{
|
|
unsigned long flags;
|
|
int newcnt;
|
|
|
|
DEBUG_LOCKS_WARN_ON(current->softirq_disable_cnt !=
|
|
this_cpu_read(softirq_ctrl.cnt));
|
|
|
|
if (IS_ENABLED(CONFIG_TRACE_IRQFLAGS) && softirq_count() == cnt) {
|
|
raw_local_irq_save(flags);
|
|
lockdep_softirqs_on(_RET_IP_);
|
|
raw_local_irq_restore(flags);
|
|
}
|
|
|
|
newcnt = __this_cpu_sub_return(softirq_ctrl.cnt, cnt);
|
|
current->softirq_disable_cnt = newcnt;
|
|
|
|
if (!newcnt && unlock) {
|
|
rcu_read_unlock();
|
|
local_unlock(&softirq_ctrl.lock);
|
|
}
|
|
}
|
|
|
|
void __local_bh_enable_ip(unsigned long ip, unsigned int cnt)
|
|
{
|
|
bool preempt_on = preemptible();
|
|
unsigned long flags;
|
|
u32 pending;
|
|
int curcnt;
|
|
|
|
WARN_ON_ONCE(in_hardirq());
|
|
lockdep_assert_irqs_enabled();
|
|
|
|
local_irq_save(flags);
|
|
curcnt = __this_cpu_read(softirq_ctrl.cnt);
|
|
|
|
/*
|
|
* If this is not reenabling soft interrupts, no point in trying to
|
|
* run pending ones.
|
|
*/
|
|
if (curcnt != cnt)
|
|
goto out;
|
|
|
|
pending = local_softirq_pending();
|
|
if (!pending)
|
|
goto out;
|
|
|
|
/*
|
|
* If this was called from non preemptible context, wake up the
|
|
* softirq daemon.
|
|
*/
|
|
if (!preempt_on) {
|
|
wakeup_softirqd();
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Adjust softirq count to SOFTIRQ_OFFSET which makes
|
|
* in_serving_softirq() become true.
|
|
*/
|
|
cnt = SOFTIRQ_OFFSET;
|
|
__local_bh_enable(cnt, false);
|
|
__do_softirq();
|
|
|
|
out:
|
|
__local_bh_enable(cnt, preempt_on);
|
|
local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(__local_bh_enable_ip);
|
|
|
|
/*
|
|
* Invoked from ksoftirqd_run() outside of the interrupt disabled section
|
|
* to acquire the per CPU local lock for reentrancy protection.
|
|
*/
|
|
static inline void ksoftirqd_run_begin(void)
|
|
{
|
|
__local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET);
|
|
local_irq_disable();
|
|
}
|
|
|
|
/* Counterpart to ksoftirqd_run_begin() */
|
|
static inline void ksoftirqd_run_end(void)
|
|
{
|
|
__local_bh_enable(SOFTIRQ_OFFSET, true);
|
|
WARN_ON_ONCE(in_interrupt());
|
|
local_irq_enable();
|
|
}
|
|
|
|
static inline void softirq_handle_begin(void) { }
|
|
static inline void softirq_handle_end(void) { }
|
|
|
|
static inline bool should_wake_ksoftirqd(void)
|
|
{
|
|
return !this_cpu_read(softirq_ctrl.cnt);
|
|
}
|
|
|
|
static inline void invoke_softirq(void)
|
|
{
|
|
if (should_wake_ksoftirqd())
|
|
wakeup_softirqd();
|
|
}
|
|
|
|
/*
|
|
* flush_smp_call_function_queue() can raise a soft interrupt in a function
|
|
* call. On RT kernels this is undesired and the only known functionality
|
|
* in the block layer which does this is disabled on RT. If soft interrupts
|
|
* get raised which haven't been raised before the flush, warn so it can be
|
|
* investigated.
|
|
*/
|
|
void do_softirq_post_smp_call_flush(unsigned int was_pending)
|
|
{
|
|
if (WARN_ON_ONCE(was_pending != local_softirq_pending()))
|
|
invoke_softirq();
|
|
}
|
|
|
|
#else /* CONFIG_PREEMPT_RT */
|
|
|
|
/*
|
|
* This one is for softirq.c-internal use, where hardirqs are disabled
|
|
* legitimately:
|
|
*/
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
|
|
{
|
|
unsigned long flags;
|
|
|
|
WARN_ON_ONCE(in_hardirq());
|
|
|
|
raw_local_irq_save(flags);
|
|
/*
|
|
* The preempt tracer hooks into preempt_count_add and will break
|
|
* lockdep because it calls back into lockdep after SOFTIRQ_OFFSET
|
|
* is set and before current->softirq_enabled is cleared.
|
|
* We must manually increment preempt_count here and manually
|
|
* call the trace_preempt_off later.
|
|
*/
|
|
__preempt_count_add(cnt);
|
|
/*
|
|
* Were softirqs turned off above:
|
|
*/
|
|
if (softirq_count() == (cnt & SOFTIRQ_MASK))
|
|
lockdep_softirqs_off(ip);
|
|
raw_local_irq_restore(flags);
|
|
|
|
if (preempt_count() == cnt) {
|
|
#ifdef CONFIG_DEBUG_PREEMPT
|
|
current->preempt_disable_ip = get_lock_parent_ip();
|
|
#endif
|
|
trace_preempt_off(CALLER_ADDR0, get_lock_parent_ip());
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(__local_bh_disable_ip);
|
|
#endif /* CONFIG_TRACE_IRQFLAGS */
|
|
|
|
static void __local_bh_enable(unsigned int cnt)
|
|
{
|
|
lockdep_assert_irqs_disabled();
|
|
|
|
if (preempt_count() == cnt)
|
|
trace_preempt_on(CALLER_ADDR0, get_lock_parent_ip());
|
|
|
|
if (softirq_count() == (cnt & SOFTIRQ_MASK))
|
|
lockdep_softirqs_on(_RET_IP_);
|
|
|
|
__preempt_count_sub(cnt);
|
|
}
|
|
|
|
/*
|
|
* Special-case - softirqs can safely be enabled by __do_softirq(),
|
|
* without processing still-pending softirqs:
|
|
*/
|
|
void _local_bh_enable(void)
|
|
{
|
|
WARN_ON_ONCE(in_hardirq());
|
|
__local_bh_enable(SOFTIRQ_DISABLE_OFFSET);
|
|
}
|
|
EXPORT_SYMBOL(_local_bh_enable);
|
|
|
|
void __local_bh_enable_ip(unsigned long ip, unsigned int cnt)
|
|
{
|
|
WARN_ON_ONCE(in_hardirq());
|
|
lockdep_assert_irqs_enabled();
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
local_irq_disable();
|
|
#endif
|
|
/*
|
|
* Are softirqs going to be turned on now:
|
|
*/
|
|
if (softirq_count() == SOFTIRQ_DISABLE_OFFSET)
|
|
lockdep_softirqs_on(ip);
|
|
/*
|
|
* Keep preemption disabled until we are done with
|
|
* softirq processing:
|
|
*/
|
|
__preempt_count_sub(cnt - 1);
|
|
|
|
if (unlikely(!in_interrupt() && local_softirq_pending())) {
|
|
/*
|
|
* Run softirq if any pending. And do it in its own stack
|
|
* as we may be calling this deep in a task call stack already.
|
|
*/
|
|
do_softirq();
|
|
}
|
|
|
|
preempt_count_dec();
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
local_irq_enable();
|
|
#endif
|
|
preempt_check_resched();
|
|
}
|
|
EXPORT_SYMBOL(__local_bh_enable_ip);
|
|
|
|
static inline void softirq_handle_begin(void)
|
|
{
|
|
__local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET);
|
|
}
|
|
|
|
static inline void softirq_handle_end(void)
|
|
{
|
|
__local_bh_enable(SOFTIRQ_OFFSET);
|
|
WARN_ON_ONCE(in_interrupt());
|
|
}
|
|
|
|
static inline void ksoftirqd_run_begin(void)
|
|
{
|
|
local_irq_disable();
|
|
}
|
|
|
|
static inline void ksoftirqd_run_end(void)
|
|
{
|
|
local_irq_enable();
|
|
}
|
|
|
|
static inline bool should_wake_ksoftirqd(void)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static inline void invoke_softirq(void)
|
|
{
|
|
if (!force_irqthreads() || !__this_cpu_read(ksoftirqd)) {
|
|
#ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
|
|
/*
|
|
* We can safely execute softirq on the current stack if
|
|
* it is the irq stack, because it should be near empty
|
|
* at this stage.
|
|
*/
|
|
__do_softirq();
|
|
#else
|
|
/*
|
|
* Otherwise, irq_exit() is called on the task stack that can
|
|
* be potentially deep already. So call softirq in its own stack
|
|
* to prevent from any overrun.
|
|
*/
|
|
do_softirq_own_stack();
|
|
#endif
|
|
} else {
|
|
wakeup_softirqd();
|
|
}
|
|
}
|
|
|
|
asmlinkage __visible void do_softirq(void)
|
|
{
|
|
__u32 pending;
|
|
unsigned long flags;
|
|
|
|
if (in_interrupt())
|
|
return;
|
|
|
|
local_irq_save(flags);
|
|
|
|
pending = local_softirq_pending();
|
|
|
|
if (pending)
|
|
do_softirq_own_stack();
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
#endif /* !CONFIG_PREEMPT_RT */
|
|
|
|
/*
|
|
* We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
|
|
* but break the loop if need_resched() is set or after 2 ms.
|
|
* The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in
|
|
* certain cases, such as stop_machine(), jiffies may cease to
|
|
* increment and so we need the MAX_SOFTIRQ_RESTART limit as
|
|
* well to make sure we eventually return from this method.
|
|
*
|
|
* These limits have been established via experimentation.
|
|
* The two things to balance is latency against fairness -
|
|
* we want to handle softirqs as soon as possible, but they
|
|
* should not be able to lock up the box.
|
|
*/
|
|
#define MAX_SOFTIRQ_TIME msecs_to_jiffies(2)
|
|
#define MAX_SOFTIRQ_RESTART 10
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
/*
|
|
* When we run softirqs from irq_exit() and thus on the hardirq stack we need
|
|
* to keep the lockdep irq context tracking as tight as possible in order to
|
|
* not miss-qualify lock contexts and miss possible deadlocks.
|
|
*/
|
|
|
|
static inline bool lockdep_softirq_start(void)
|
|
{
|
|
bool in_hardirq = false;
|
|
|
|
if (lockdep_hardirq_context()) {
|
|
in_hardirq = true;
|
|
lockdep_hardirq_exit();
|
|
}
|
|
|
|
lockdep_softirq_enter();
|
|
|
|
return in_hardirq;
|
|
}
|
|
|
|
static inline void lockdep_softirq_end(bool in_hardirq)
|
|
{
|
|
lockdep_softirq_exit();
|
|
|
|
if (in_hardirq)
|
|
lockdep_hardirq_enter();
|
|
}
|
|
#else
|
|
static inline bool lockdep_softirq_start(void) { return false; }
|
|
static inline void lockdep_softirq_end(bool in_hardirq) { }
|
|
#endif
|
|
|
|
static void handle_softirqs(bool ksirqd)
|
|
{
|
|
unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
|
|
unsigned long old_flags = current->flags;
|
|
int max_restart = MAX_SOFTIRQ_RESTART;
|
|
struct softirq_action *h;
|
|
bool in_hardirq;
|
|
__u32 pending;
|
|
int softirq_bit;
|
|
|
|
/*
|
|
* Mask out PF_MEMALLOC as the current task context is borrowed for the
|
|
* softirq. A softirq handled, such as network RX, might set PF_MEMALLOC
|
|
* again if the socket is related to swapping.
|
|
*/
|
|
current->flags &= ~PF_MEMALLOC;
|
|
|
|
pending = local_softirq_pending();
|
|
|
|
softirq_handle_begin();
|
|
in_hardirq = lockdep_softirq_start();
|
|
account_softirq_enter(current);
|
|
|
|
restart:
|
|
/* Reset the pending bitmask before enabling irqs */
|
|
set_softirq_pending(0);
|
|
|
|
local_irq_enable();
|
|
|
|
h = softirq_vec;
|
|
|
|
while ((softirq_bit = ffs(pending))) {
|
|
unsigned int vec_nr;
|
|
int prev_count;
|
|
|
|
h += softirq_bit - 1;
|
|
|
|
vec_nr = h - softirq_vec;
|
|
prev_count = preempt_count();
|
|
|
|
kstat_incr_softirqs_this_cpu(vec_nr);
|
|
|
|
trace_softirq_entry(vec_nr);
|
|
h->action();
|
|
trace_softirq_exit(vec_nr);
|
|
if (unlikely(prev_count != preempt_count())) {
|
|
pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n",
|
|
vec_nr, softirq_to_name[vec_nr], h->action,
|
|
prev_count, preempt_count());
|
|
preempt_count_set(prev_count);
|
|
}
|
|
h++;
|
|
pending >>= softirq_bit;
|
|
}
|
|
|
|
if (!IS_ENABLED(CONFIG_PREEMPT_RT) && ksirqd)
|
|
rcu_softirq_qs();
|
|
|
|
local_irq_disable();
|
|
|
|
pending = local_softirq_pending();
|
|
if (pending) {
|
|
if (time_before(jiffies, end) && !need_resched() &&
|
|
--max_restart)
|
|
goto restart;
|
|
|
|
wakeup_softirqd();
|
|
}
|
|
|
|
account_softirq_exit(current);
|
|
lockdep_softirq_end(in_hardirq);
|
|
softirq_handle_end();
|
|
current_restore_flags(old_flags, PF_MEMALLOC);
|
|
}
|
|
|
|
asmlinkage __visible void __softirq_entry __do_softirq(void)
|
|
{
|
|
handle_softirqs(false);
|
|
}
|
|
|
|
/**
|
|
* irq_enter_rcu - Enter an interrupt context with RCU watching
|
|
*/
|
|
void irq_enter_rcu(void)
|
|
{
|
|
__irq_enter_raw();
|
|
|
|
if (tick_nohz_full_cpu(smp_processor_id()) ||
|
|
(is_idle_task(current) && (irq_count() == HARDIRQ_OFFSET)))
|
|
tick_irq_enter();
|
|
|
|
account_hardirq_enter(current);
|
|
}
|
|
|
|
/**
|
|
* irq_enter - Enter an interrupt context including RCU update
|
|
*/
|
|
void irq_enter(void)
|
|
{
|
|
ct_irq_enter();
|
|
irq_enter_rcu();
|
|
}
|
|
|
|
static inline void tick_irq_exit(void)
|
|
{
|
|
#ifdef CONFIG_NO_HZ_COMMON
|
|
int cpu = smp_processor_id();
|
|
|
|
/* Make sure that timer wheel updates are propagated */
|
|
if ((sched_core_idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) {
|
|
if (!in_hardirq())
|
|
tick_nohz_irq_exit();
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_IRQ_FORCED_THREADING
|
|
DEFINE_PER_CPU(struct task_struct *, ktimerd);
|
|
DEFINE_PER_CPU(unsigned long, pending_timer_softirq);
|
|
|
|
static void wake_timersd(void)
|
|
{
|
|
struct task_struct *tsk = __this_cpu_read(ktimerd);
|
|
|
|
if (tsk)
|
|
wake_up_process(tsk);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void wake_timersd(void) { }
|
|
|
|
#endif
|
|
|
|
static inline void __irq_exit_rcu(void)
|
|
{
|
|
#ifndef __ARCH_IRQ_EXIT_IRQS_DISABLED
|
|
local_irq_disable();
|
|
#else
|
|
lockdep_assert_irqs_disabled();
|
|
#endif
|
|
account_hardirq_exit(current);
|
|
preempt_count_sub(HARDIRQ_OFFSET);
|
|
if (!in_interrupt() && local_softirq_pending())
|
|
invoke_softirq();
|
|
|
|
if (IS_ENABLED(CONFIG_IRQ_FORCED_THREADING) && force_irqthreads() &&
|
|
local_timers_pending_force_th() && !(in_nmi() | in_hardirq()))
|
|
wake_timersd();
|
|
|
|
tick_irq_exit();
|
|
}
|
|
|
|
/**
|
|
* irq_exit_rcu() - Exit an interrupt context without updating RCU
|
|
*
|
|
* Also processes softirqs if needed and possible.
|
|
*/
|
|
void irq_exit_rcu(void)
|
|
{
|
|
__irq_exit_rcu();
|
|
/* must be last! */
|
|
lockdep_hardirq_exit();
|
|
}
|
|
|
|
/**
|
|
* irq_exit - Exit an interrupt context, update RCU and lockdep
|
|
*
|
|
* Also processes softirqs if needed and possible.
|
|
*/
|
|
void irq_exit(void)
|
|
{
|
|
__irq_exit_rcu();
|
|
ct_irq_exit();
|
|
/* must be last! */
|
|
lockdep_hardirq_exit();
|
|
}
|
|
|
|
/*
|
|
* This function must run with irqs disabled!
|
|
*/
|
|
inline void raise_softirq_irqoff(unsigned int nr)
|
|
{
|
|
__raise_softirq_irqoff(nr);
|
|
|
|
/*
|
|
* If we're in an interrupt or softirq, we're done
|
|
* (this also catches softirq-disabled code). We will
|
|
* actually run the softirq once we return from
|
|
* the irq or softirq.
|
|
*
|
|
* Otherwise we wake up ksoftirqd to make sure we
|
|
* schedule the softirq soon.
|
|
*/
|
|
if (!in_interrupt() && should_wake_ksoftirqd())
|
|
wakeup_softirqd();
|
|
}
|
|
|
|
void raise_softirq(unsigned int nr)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
raise_softirq_irqoff(nr);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
void __raise_softirq_irqoff(unsigned int nr)
|
|
{
|
|
lockdep_assert_irqs_disabled();
|
|
trace_softirq_raise(nr);
|
|
or_softirq_pending(1UL << nr);
|
|
}
|
|
|
|
void open_softirq(int nr, void (*action)(void))
|
|
{
|
|
softirq_vec[nr].action = action;
|
|
}
|
|
|
|
/*
|
|
* Tasklets
|
|
*/
|
|
struct tasklet_head {
|
|
struct tasklet_struct *head;
|
|
struct tasklet_struct **tail;
|
|
};
|
|
|
|
static DEFINE_PER_CPU(struct tasklet_head, tasklet_vec);
|
|
static DEFINE_PER_CPU(struct tasklet_head, tasklet_hi_vec);
|
|
|
|
static void __tasklet_schedule_common(struct tasklet_struct *t,
|
|
struct tasklet_head __percpu *headp,
|
|
unsigned int softirq_nr)
|
|
{
|
|
struct tasklet_head *head;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
head = this_cpu_ptr(headp);
|
|
t->next = NULL;
|
|
*head->tail = t;
|
|
head->tail = &(t->next);
|
|
raise_softirq_irqoff(softirq_nr);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
void __tasklet_schedule(struct tasklet_struct *t)
|
|
{
|
|
__tasklet_schedule_common(t, &tasklet_vec,
|
|
TASKLET_SOFTIRQ);
|
|
}
|
|
EXPORT_SYMBOL(__tasklet_schedule);
|
|
|
|
void __tasklet_hi_schedule(struct tasklet_struct *t)
|
|
{
|
|
__tasklet_schedule_common(t, &tasklet_hi_vec,
|
|
HI_SOFTIRQ);
|
|
}
|
|
EXPORT_SYMBOL(__tasklet_hi_schedule);
|
|
|
|
static bool tasklet_clear_sched(struct tasklet_struct *t)
|
|
{
|
|
if (test_and_clear_wake_up_bit(TASKLET_STATE_SCHED, &t->state))
|
|
return true;
|
|
|
|
WARN_ONCE(1, "tasklet SCHED state not set: %s %pS\n",
|
|
t->use_callback ? "callback" : "func",
|
|
t->use_callback ? (void *)t->callback : (void *)t->func);
|
|
|
|
return false;
|
|
}
|
|
|
|
static void tasklet_action_common(struct tasklet_head *tl_head,
|
|
unsigned int softirq_nr)
|
|
{
|
|
struct tasklet_struct *list;
|
|
|
|
local_irq_disable();
|
|
list = tl_head->head;
|
|
tl_head->head = NULL;
|
|
tl_head->tail = &tl_head->head;
|
|
local_irq_enable();
|
|
|
|
while (list) {
|
|
struct tasklet_struct *t = list;
|
|
|
|
list = list->next;
|
|
|
|
if (tasklet_trylock(t)) {
|
|
if (!atomic_read(&t->count)) {
|
|
if (tasklet_clear_sched(t)) {
|
|
if (t->use_callback) {
|
|
trace_tasklet_entry(t, t->callback);
|
|
t->callback(t);
|
|
trace_tasklet_exit(t, t->callback);
|
|
} else {
|
|
trace_tasklet_entry(t, t->func);
|
|
t->func(t->data);
|
|
trace_tasklet_exit(t, t->func);
|
|
}
|
|
}
|
|
tasklet_unlock(t);
|
|
continue;
|
|
}
|
|
tasklet_unlock(t);
|
|
}
|
|
|
|
local_irq_disable();
|
|
t->next = NULL;
|
|
*tl_head->tail = t;
|
|
tl_head->tail = &t->next;
|
|
__raise_softirq_irqoff(softirq_nr);
|
|
local_irq_enable();
|
|
}
|
|
}
|
|
|
|
static __latent_entropy void tasklet_action(void)
|
|
{
|
|
workqueue_softirq_action(false);
|
|
tasklet_action_common(this_cpu_ptr(&tasklet_vec), TASKLET_SOFTIRQ);
|
|
}
|
|
|
|
static __latent_entropy void tasklet_hi_action(void)
|
|
{
|
|
workqueue_softirq_action(true);
|
|
tasklet_action_common(this_cpu_ptr(&tasklet_hi_vec), HI_SOFTIRQ);
|
|
}
|
|
|
|
void tasklet_setup(struct tasklet_struct *t,
|
|
void (*callback)(struct tasklet_struct *))
|
|
{
|
|
t->next = NULL;
|
|
t->state = 0;
|
|
atomic_set(&t->count, 0);
|
|
t->callback = callback;
|
|
t->use_callback = true;
|
|
t->data = 0;
|
|
}
|
|
EXPORT_SYMBOL(tasklet_setup);
|
|
|
|
void tasklet_init(struct tasklet_struct *t,
|
|
void (*func)(unsigned long), unsigned long data)
|
|
{
|
|
t->next = NULL;
|
|
t->state = 0;
|
|
atomic_set(&t->count, 0);
|
|
t->func = func;
|
|
t->use_callback = false;
|
|
t->data = data;
|
|
}
|
|
EXPORT_SYMBOL(tasklet_init);
|
|
|
|
#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT)
|
|
/*
|
|
* Do not use in new code. Waiting for tasklets from atomic contexts is
|
|
* error prone and should be avoided.
|
|
*/
|
|
void tasklet_unlock_spin_wait(struct tasklet_struct *t)
|
|
{
|
|
while (test_bit(TASKLET_STATE_RUN, &(t)->state)) {
|
|
if (IS_ENABLED(CONFIG_PREEMPT_RT)) {
|
|
/*
|
|
* Prevent a live lock when current preempted soft
|
|
* interrupt processing or prevents ksoftirqd from
|
|
* running. If the tasklet runs on a different CPU
|
|
* then this has no effect other than doing the BH
|
|
* disable/enable dance for nothing.
|
|
*/
|
|
local_bh_disable();
|
|
local_bh_enable();
|
|
} else {
|
|
cpu_relax();
|
|
}
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(tasklet_unlock_spin_wait);
|
|
#endif
|
|
|
|
void tasklet_kill(struct tasklet_struct *t)
|
|
{
|
|
if (in_interrupt())
|
|
pr_notice("Attempt to kill tasklet from interrupt\n");
|
|
|
|
wait_on_bit_lock(&t->state, TASKLET_STATE_SCHED, TASK_UNINTERRUPTIBLE);
|
|
|
|
tasklet_unlock_wait(t);
|
|
tasklet_clear_sched(t);
|
|
}
|
|
EXPORT_SYMBOL(tasklet_kill);
|
|
|
|
#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT)
|
|
void tasklet_unlock(struct tasklet_struct *t)
|
|
{
|
|
clear_and_wake_up_bit(TASKLET_STATE_RUN, &t->state);
|
|
}
|
|
EXPORT_SYMBOL_GPL(tasklet_unlock);
|
|
|
|
void tasklet_unlock_wait(struct tasklet_struct *t)
|
|
{
|
|
wait_on_bit(&t->state, TASKLET_STATE_RUN, TASK_UNINTERRUPTIBLE);
|
|
}
|
|
EXPORT_SYMBOL_GPL(tasklet_unlock_wait);
|
|
#endif
|
|
|
|
void __init softirq_init(void)
|
|
{
|
|
int cpu;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
per_cpu(tasklet_vec, cpu).tail =
|
|
&per_cpu(tasklet_vec, cpu).head;
|
|
per_cpu(tasklet_hi_vec, cpu).tail =
|
|
&per_cpu(tasklet_hi_vec, cpu).head;
|
|
}
|
|
|
|
open_softirq(TASKLET_SOFTIRQ, tasklet_action);
|
|
open_softirq(HI_SOFTIRQ, tasklet_hi_action);
|
|
}
|
|
|
|
static int ksoftirqd_should_run(unsigned int cpu)
|
|
{
|
|
return local_softirq_pending();
|
|
}
|
|
|
|
static void run_ksoftirqd(unsigned int cpu)
|
|
{
|
|
ksoftirqd_run_begin();
|
|
if (local_softirq_pending()) {
|
|
/*
|
|
* We can safely run softirq on inline stack, as we are not deep
|
|
* in the task stack here.
|
|
*/
|
|
handle_softirqs(true);
|
|
ksoftirqd_run_end();
|
|
cond_resched();
|
|
return;
|
|
}
|
|
ksoftirqd_run_end();
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
static int takeover_tasklets(unsigned int cpu)
|
|
{
|
|
workqueue_softirq_dead(cpu);
|
|
|
|
/* CPU is dead, so no lock needed. */
|
|
local_irq_disable();
|
|
|
|
/* Find end, append list for that CPU. */
|
|
if (&per_cpu(tasklet_vec, cpu).head != per_cpu(tasklet_vec, cpu).tail) {
|
|
*__this_cpu_read(tasklet_vec.tail) = per_cpu(tasklet_vec, cpu).head;
|
|
__this_cpu_write(tasklet_vec.tail, per_cpu(tasklet_vec, cpu).tail);
|
|
per_cpu(tasklet_vec, cpu).head = NULL;
|
|
per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head;
|
|
}
|
|
raise_softirq_irqoff(TASKLET_SOFTIRQ);
|
|
|
|
if (&per_cpu(tasklet_hi_vec, cpu).head != per_cpu(tasklet_hi_vec, cpu).tail) {
|
|
*__this_cpu_read(tasklet_hi_vec.tail) = per_cpu(tasklet_hi_vec, cpu).head;
|
|
__this_cpu_write(tasklet_hi_vec.tail, per_cpu(tasklet_hi_vec, cpu).tail);
|
|
per_cpu(tasklet_hi_vec, cpu).head = NULL;
|
|
per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head;
|
|
}
|
|
raise_softirq_irqoff(HI_SOFTIRQ);
|
|
|
|
local_irq_enable();
|
|
return 0;
|
|
}
|
|
#else
|
|
#define takeover_tasklets NULL
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|
|
|
|
static struct smp_hotplug_thread softirq_threads = {
|
|
.store = &ksoftirqd,
|
|
.thread_should_run = ksoftirqd_should_run,
|
|
.thread_fn = run_ksoftirqd,
|
|
.thread_comm = "ksoftirqd/%u",
|
|
};
|
|
|
|
#ifdef CONFIG_IRQ_FORCED_THREADING
|
|
static void ktimerd_setup(unsigned int cpu)
|
|
{
|
|
/* Above SCHED_NORMAL to handle timers before regular tasks. */
|
|
sched_set_fifo_low(current);
|
|
}
|
|
|
|
static int ktimerd_should_run(unsigned int cpu)
|
|
{
|
|
return local_timers_pending_force_th();
|
|
}
|
|
|
|
void raise_ktimers_thread(unsigned int nr)
|
|
{
|
|
trace_softirq_raise(nr);
|
|
__this_cpu_or(pending_timer_softirq, BIT(nr));
|
|
}
|
|
|
|
static void run_ktimerd(unsigned int cpu)
|
|
{
|
|
unsigned int timer_si;
|
|
|
|
ksoftirqd_run_begin();
|
|
|
|
timer_si = local_timers_pending_force_th();
|
|
__this_cpu_write(pending_timer_softirq, 0);
|
|
or_softirq_pending(timer_si);
|
|
|
|
__do_softirq();
|
|
|
|
ksoftirqd_run_end();
|
|
}
|
|
|
|
static struct smp_hotplug_thread timer_thread = {
|
|
.store = &ktimerd,
|
|
.setup = ktimerd_setup,
|
|
.thread_should_run = ktimerd_should_run,
|
|
.thread_fn = run_ktimerd,
|
|
.thread_comm = "ktimers/%u",
|
|
};
|
|
#endif
|
|
|
|
static __init int spawn_ksoftirqd(void)
|
|
{
|
|
cpuhp_setup_state_nocalls(CPUHP_SOFTIRQ_DEAD, "softirq:dead", NULL,
|
|
takeover_tasklets);
|
|
BUG_ON(smpboot_register_percpu_thread(&softirq_threads));
|
|
#ifdef CONFIG_IRQ_FORCED_THREADING
|
|
if (force_irqthreads())
|
|
BUG_ON(smpboot_register_percpu_thread(&timer_thread));
|
|
#endif
|
|
return 0;
|
|
}
|
|
early_initcall(spawn_ksoftirqd);
|
|
|
|
/*
|
|
* [ These __weak aliases are kept in a separate compilation unit, so that
|
|
* GCC does not inline them incorrectly. ]
|
|
*/
|
|
|
|
int __init __weak early_irq_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int __init __weak arch_probe_nr_irqs(void)
|
|
{
|
|
return NR_IRQS_LEGACY;
|
|
}
|
|
|
|
int __init __weak arch_early_irq_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
unsigned int __weak arch_dynirq_lower_bound(unsigned int from)
|
|
{
|
|
return from;
|
|
}
|