linux/include/vdso/datapage.h
Nam Cao a812eee0b6 vdso: Rename struct arch_vdso_data to arch_vdso_time_data
The struct arch_vdso_data is only about vdso time data. So rename it to
arch_vdso_time_data to make it obvious.
Non time-related data will be migrated out of these structs soon.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-28-b64f0842d512@linutronix.de
2024-11-02 12:37:36 +01:00

170 lines
5.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __VDSO_DATAPAGE_H
#define __VDSO_DATAPAGE_H
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#include <uapi/linux/time.h>
#include <uapi/linux/types.h>
#include <uapi/asm-generic/errno-base.h>
#include <vdso/bits.h>
#include <vdso/clocksource.h>
#include <vdso/ktime.h>
#include <vdso/limits.h>
#include <vdso/math64.h>
#include <vdso/processor.h>
#include <vdso/time.h>
#include <vdso/time32.h>
#include <vdso/time64.h>
#ifdef CONFIG_ARCH_HAS_VDSO_TIME_DATA
#include <asm/vdso/time_data.h>
#else
struct arch_vdso_time_data {};
#endif
#define VDSO_BASES (CLOCK_TAI + 1)
#define VDSO_HRES (BIT(CLOCK_REALTIME) | \
BIT(CLOCK_MONOTONIC) | \
BIT(CLOCK_BOOTTIME) | \
BIT(CLOCK_TAI))
#define VDSO_COARSE (BIT(CLOCK_REALTIME_COARSE) | \
BIT(CLOCK_MONOTONIC_COARSE))
#define VDSO_RAW (BIT(CLOCK_MONOTONIC_RAW))
#define CS_HRES_COARSE 0
#define CS_RAW 1
#define CS_BASES (CS_RAW + 1)
/**
* struct vdso_timestamp - basetime per clock_id
* @sec: seconds
* @nsec: nanoseconds
*
* There is one vdso_timestamp object in vvar for each vDSO-accelerated
* clock_id. For high-resolution clocks, this encodes the time
* corresponding to vdso_data.cycle_last. For coarse clocks this encodes
* the actual time.
*
* To be noticed that for highres clocks nsec is left-shifted by
* vdso_data.cs[x].shift.
*/
struct vdso_timestamp {
u64 sec;
u64 nsec;
};
/**
* struct vdso_data - vdso datapage representation
* @seq: timebase sequence counter
* @clock_mode: clock mode
* @cycle_last: timebase at clocksource init
* @max_cycles: maximum cycles which won't overflow 64bit multiplication
* @mask: clocksource mask
* @mult: clocksource multiplier
* @shift: clocksource shift
* @basetime[clock_id]: basetime per clock_id
* @offset[clock_id]: time namespace offset per clock_id
* @tz_minuteswest: minutes west of Greenwich
* @tz_dsttime: type of DST correction
* @hrtimer_res: hrtimer resolution
* @__unused: unused
* @arch_data: architecture specific data (optional, defaults
* to an empty struct)
*
* vdso_data will be accessed by 64 bit and compat code at the same time
* so we should be careful before modifying this structure.
*
* The ordering of the struct members is optimized to have fast access to the
* often required struct members which are related to CLOCK_REALTIME and
* CLOCK_MONOTONIC. This information is stored in the first cache lines.
*
* @basetime is used to store the base time for the system wide time getter
* VVAR page.
*
* @offset is used by the special time namespace VVAR pages which are
* installed instead of the real VVAR page. These namespace pages must set
* @seq to 1 and @clock_mode to VDSO_CLOCKMODE_TIMENS to force the code into
* the time namespace slow path. The namespace aware functions retrieve the
* real system wide VVAR page, read host time and add the per clock offset.
* For clocks which are not affected by time namespace adjustment the
* offset must be zero.
*/
struct vdso_data {
u32 seq;
s32 clock_mode;
u64 cycle_last;
#ifdef CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT
u64 max_cycles;
#endif
u64 mask;
u32 mult;
u32 shift;
union {
struct vdso_timestamp basetime[VDSO_BASES];
struct timens_offset offset[VDSO_BASES];
};
s32 tz_minuteswest;
s32 tz_dsttime;
u32 hrtimer_res;
u32 __unused;
struct arch_vdso_time_data arch_data;
};
/**
* struct vdso_rng_data - vdso RNG state information
* @generation: counter representing the number of RNG reseeds
* @is_ready: boolean signaling whether the RNG is initialized
*/
struct vdso_rng_data {
u64 generation;
u8 is_ready;
};
/*
* We use the hidden visibility to prevent the compiler from generating a GOT
* relocation. Not only is going through a GOT useless (the entry couldn't and
* must not be overridden by another library), it does not even work: the linker
* cannot generate an absolute address to the data page.
*
* With the hidden visibility, the compiler simply generates a PC-relative
* relocation, and this is what we need.
*/
extern struct vdso_data _vdso_data[CS_BASES] __attribute__((visibility("hidden")));
extern struct vdso_data _timens_data[CS_BASES] __attribute__((visibility("hidden")));
extern struct vdso_rng_data _vdso_rng_data __attribute__((visibility("hidden")));
/**
* union vdso_data_store - Generic vDSO data page
*/
union vdso_data_store {
struct vdso_data data[CS_BASES];
u8 page[1U << CONFIG_PAGE_SHIFT];
};
/*
* The generic vDSO implementation requires that gettimeofday.h
* provides:
* - __arch_get_vdso_data(): to get the vdso datapage.
* - __arch_get_hw_counter(): to get the hw counter based on the
* clock_mode.
* - gettimeofday_fallback(): fallback for gettimeofday.
* - clock_gettime_fallback(): fallback for clock_gettime.
* - clock_getres_fallback(): fallback for clock_getres.
*/
#ifdef ENABLE_COMPAT_VDSO
#include <asm/vdso/compat_gettimeofday.h>
#else
#include <asm/vdso/gettimeofday.h>
#endif /* ENABLE_COMPAT_VDSO */
#endif /* !__ASSEMBLY__ */
#endif /* __VDSO_DATAPAGE_H */