Marc Ferland 93c4bb3666 w1: ds2433: add support for ds28ec20 eeprom ... The ds28ec20 eeprom is (almost) backward compatible with the ds2433. The only differences are: - the eeprom size is now 2560 bytes instead of 512; - the number of pages is now 80 (same page size as the ds2433: 256 bits); - the programming time has increased from 5ms to 10ms; This patch adds support for the ds28ec20 to the ds2433 driver. From the datasheet: The DS28EC20 provides a high degree of backward compatibility with the DS2433. Besides the different family codes, the only protocol change that is required on an existing DS2433 implementation is a lengthening of the programming duration (tPROG) from 5ms to 10ms. dmesg now returns: w1_master_driver w1_bus_master1: Attaching one wire slave 43.000000478756 crc e0 instead of: w1_master_driver w1_bus_master1: Attaching one wire slave 43.000000478756 crc e0 w1_master_driver w1_bus_master1: Family 43 for 43.000000478756.e0 is not registered. Test script writing/reading random data (CONFIG_W1_SLAVE_DS2433_CRC is not set): #!/bin/sh EEPROM=/sys/bus/w1/devices/43-000000478756/eeprom BINFILE1=/home/root/file1.bin BINFILE2=/home/root/file2.bin for BS in 1 2 3 4 8 16 32 64 128 256 512 1024 2560; do dd if=/dev/random of=${BINFILE1} bs=${BS} count=1 status=none dd if=${BINFILE1} of=${EEPROM} status=none dd if=${EEPROM} of=${BINFILE2} bs=${BS} count=1 status=none if ! cmp --silent ${BINFILE1} ${BINFILE2}; then echo file1 hexdump ${BINFILE1} echo file2 hexdump ${BINFILE2} echo FAIL exit 1 fi echo "${BS} OK!" done Results: # ./test.sh 1 OK! 2 OK! 3 OK! 4 OK! 8 OK! 16 OK! 32 OK! 64 OK! 128 OK! 256 OK! 512 OK! 1024 OK! 2560 OK! Tests with CONFIG_W1_SLAVE_DS2433_CRC=y: $ cat /proc/config.gz | gunzip | grep CONFIG_W1_SLAVE_DS2433 CONFIG_W1_SLAVE_DS2433=m CONFIG_W1_SLAVE_DS2433_CRC=y # create a 32 bytes block with a crc, i.e.: 00000000 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@| 00000010 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c| # fill all 80 blocks $ dd if=test.bin of=/sys/bus/w1/devices/43-000000478756/eeprom bs=32 count=80 # read back all blocks, i.e.: $ hexdump -C /sys/bus/w1/devices/43-000000478756/eeprom 00000000 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@| 00000010 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c| 00000020 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@| 00000030 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c| ... 000009e0 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@| 000009f0 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c| 00000a00 Note: both memories (ds2433 and ds28ec20) have been tested with the new driver. Signed-off-by: Marc Ferland <marc.ferland@sonatest.com> Co-developed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Link: https://lore.kernel.org/r/20231218150230.1992448-6-marc.ferland@sonatest.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>		2023-12-20 09:25:25 +01:00
..
Kconfig
Makefile
w1_ds28e04.c
w1_ds28e17.c
w1_ds250x.c
w1_ds2405.c
w1_ds2406.c
w1_ds2408.c
w1_ds2413.c
w1_ds2423.c
w1_ds2430.c
w1_ds2431.c
w1_ds2433.c	w1: ds2433: add support for ds28ec20 eeprom	2023-12-20 09:25:25 +01:00
w1_ds2438.c
w1_ds2780.c
w1_ds2780.h
w1_ds2781.c
w1_ds2781.h
w1_ds2805.c
w1_smem.c
w1_therm.c