mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
6c4e1ef46c
Introduce new kernel config symbol for Microchip usb5744 SMBus programming
support. Since usb5744 i2c initialization routine uses i2c SMBus APIs these
APIs should only be invoked when kernel has I2C support. This new kernel
config describes the dependency on I2C kernel support and fix the below
build issues when USB_ONBOARD_DEV=y and CONFIG_I2C=m.
riscv64-linux-ld: drivers/usb/misc/onboard_usb_dev.o:
undefined reference to `i2c_find_device_by_fwnode'
drivers/usb/misc/onboard_usb_dev.c:408:(.text+0xb24): undefined
reference to `i2c_smbus_write_block_data'
<snip>
Parsing of the i2c-bus bus handle is not put under usb5744 kernel config
check as the intention is to report an error when DT is configured for
usb5744 SMBus support and kernel has USB_ONBOARD_DEV_USB5744 disabled.
Fixes: 6782311d04
("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Suggested-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409140539.3Axwv38m-lkp@intel.com/
Acked-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Link: https://lore.kernel.org/r/1727529992-476088-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
634 lines
16 KiB
C
634 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for onboard USB devices
|
|
*
|
|
* Copyright (c) 2022, Google LLC
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/export.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/onboard_dev.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "onboard_usb_dev.h"
|
|
|
|
/* USB5744 register offset and mask */
|
|
#define USB5744_CMD_ATTACH 0xAA
|
|
#define USB5744_CMD_ATTACH_LSB 0x56
|
|
#define USB5744_CMD_CREG_ACCESS 0x99
|
|
#define USB5744_CMD_CREG_ACCESS_LSB 0x37
|
|
#define USB5744_CREG_MEM_ADDR 0x00
|
|
#define USB5744_CREG_WRITE 0x00
|
|
#define USB5744_CREG_RUNTIMEFLAGS2 0x41
|
|
#define USB5744_CREG_RUNTIMEFLAGS2_LSB 0x1D
|
|
#define USB5744_CREG_BYPASS_UDC_SUSPEND BIT(3)
|
|
|
|
static void onboard_dev_attach_usb_driver(struct work_struct *work);
|
|
|
|
static struct usb_device_driver onboard_dev_usbdev_driver;
|
|
static DECLARE_WORK(attach_usb_driver_work, onboard_dev_attach_usb_driver);
|
|
|
|
/************************** Platform driver **************************/
|
|
|
|
struct usbdev_node {
|
|
struct usb_device *udev;
|
|
struct list_head list;
|
|
};
|
|
|
|
struct onboard_dev {
|
|
struct regulator_bulk_data supplies[MAX_SUPPLIES];
|
|
struct device *dev;
|
|
const struct onboard_dev_pdata *pdata;
|
|
struct gpio_desc *reset_gpio;
|
|
bool always_powered_in_suspend;
|
|
bool is_powered_on;
|
|
bool going_away;
|
|
struct list_head udev_list;
|
|
struct mutex lock;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static int onboard_dev_get_regulators(struct onboard_dev *onboard_dev)
|
|
{
|
|
const char * const *supply_names = onboard_dev->pdata->supply_names;
|
|
unsigned int num_supplies = onboard_dev->pdata->num_supplies;
|
|
struct device *dev = onboard_dev->dev;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
if (num_supplies > MAX_SUPPLIES)
|
|
return dev_err_probe(dev, -EINVAL, "max %d supplies supported!\n",
|
|
MAX_SUPPLIES);
|
|
|
|
for (i = 0; i < num_supplies; i++)
|
|
onboard_dev->supplies[i].supply = supply_names[i];
|
|
|
|
err = devm_regulator_bulk_get(dev, num_supplies, onboard_dev->supplies);
|
|
if (err)
|
|
dev_err(dev, "Failed to get regulator supplies: %pe\n",
|
|
ERR_PTR(err));
|
|
|
|
return err;
|
|
}
|
|
|
|
static int onboard_dev_power_on(struct onboard_dev *onboard_dev)
|
|
{
|
|
int err;
|
|
|
|
err = clk_prepare_enable(onboard_dev->clk);
|
|
if (err) {
|
|
dev_err(onboard_dev->dev, "failed to enable clock: %pe\n",
|
|
ERR_PTR(err));
|
|
return err;
|
|
}
|
|
|
|
err = regulator_bulk_enable(onboard_dev->pdata->num_supplies,
|
|
onboard_dev->supplies);
|
|
if (err) {
|
|
dev_err(onboard_dev->dev, "failed to enable supplies: %pe\n",
|
|
ERR_PTR(err));
|
|
goto disable_clk;
|
|
}
|
|
|
|
fsleep(onboard_dev->pdata->reset_us);
|
|
gpiod_set_value_cansleep(onboard_dev->reset_gpio, 0);
|
|
fsleep(onboard_dev->pdata->power_on_delay_us);
|
|
|
|
onboard_dev->is_powered_on = true;
|
|
|
|
return 0;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(onboard_dev->clk);
|
|
return err;
|
|
}
|
|
|
|
static int onboard_dev_power_off(struct onboard_dev *onboard_dev)
|
|
{
|
|
int err;
|
|
|
|
gpiod_set_value_cansleep(onboard_dev->reset_gpio, 1);
|
|
|
|
err = regulator_bulk_disable(onboard_dev->pdata->num_supplies,
|
|
onboard_dev->supplies);
|
|
if (err) {
|
|
dev_err(onboard_dev->dev, "failed to disable supplies: %pe\n",
|
|
ERR_PTR(err));
|
|
return err;
|
|
}
|
|
|
|
clk_disable_unprepare(onboard_dev->clk);
|
|
|
|
onboard_dev->is_powered_on = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused onboard_dev_suspend(struct device *dev)
|
|
{
|
|
struct onboard_dev *onboard_dev = dev_get_drvdata(dev);
|
|
struct usbdev_node *node;
|
|
bool power_off = true;
|
|
|
|
if (onboard_dev->always_powered_in_suspend)
|
|
return 0;
|
|
|
|
mutex_lock(&onboard_dev->lock);
|
|
|
|
list_for_each_entry(node, &onboard_dev->udev_list, list) {
|
|
if (!device_may_wakeup(node->udev->bus->controller))
|
|
continue;
|
|
|
|
if (usb_wakeup_enabled_descendants(node->udev)) {
|
|
power_off = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&onboard_dev->lock);
|
|
|
|
if (!power_off)
|
|
return 0;
|
|
|
|
return onboard_dev_power_off(onboard_dev);
|
|
}
|
|
|
|
static int __maybe_unused onboard_dev_resume(struct device *dev)
|
|
{
|
|
struct onboard_dev *onboard_dev = dev_get_drvdata(dev);
|
|
|
|
if (onboard_dev->is_powered_on)
|
|
return 0;
|
|
|
|
return onboard_dev_power_on(onboard_dev);
|
|
}
|
|
|
|
static inline void get_udev_link_name(const struct usb_device *udev, char *buf,
|
|
size_t size)
|
|
{
|
|
snprintf(buf, size, "usb_dev.%s", dev_name(&udev->dev));
|
|
}
|
|
|
|
static int onboard_dev_add_usbdev(struct onboard_dev *onboard_dev,
|
|
struct usb_device *udev)
|
|
{
|
|
struct usbdev_node *node;
|
|
char link_name[64];
|
|
int err;
|
|
|
|
mutex_lock(&onboard_dev->lock);
|
|
|
|
if (onboard_dev->going_away) {
|
|
err = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
node = kzalloc(sizeof(*node), GFP_KERNEL);
|
|
if (!node) {
|
|
err = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
node->udev = udev;
|
|
|
|
list_add(&node->list, &onboard_dev->udev_list);
|
|
|
|
mutex_unlock(&onboard_dev->lock);
|
|
|
|
get_udev_link_name(udev, link_name, sizeof(link_name));
|
|
WARN_ON(sysfs_create_link(&onboard_dev->dev->kobj, &udev->dev.kobj,
|
|
link_name));
|
|
|
|
return 0;
|
|
|
|
error:
|
|
mutex_unlock(&onboard_dev->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void onboard_dev_remove_usbdev(struct onboard_dev *onboard_dev,
|
|
const struct usb_device *udev)
|
|
{
|
|
struct usbdev_node *node;
|
|
char link_name[64];
|
|
|
|
get_udev_link_name(udev, link_name, sizeof(link_name));
|
|
sysfs_remove_link(&onboard_dev->dev->kobj, link_name);
|
|
|
|
mutex_lock(&onboard_dev->lock);
|
|
|
|
list_for_each_entry(node, &onboard_dev->udev_list, list) {
|
|
if (node->udev == udev) {
|
|
list_del(&node->list);
|
|
kfree(node);
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&onboard_dev->lock);
|
|
}
|
|
|
|
static ssize_t always_powered_in_suspend_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
const struct onboard_dev *onboard_dev = dev_get_drvdata(dev);
|
|
|
|
return sysfs_emit(buf, "%d\n", onboard_dev->always_powered_in_suspend);
|
|
}
|
|
|
|
static ssize_t always_powered_in_suspend_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct onboard_dev *onboard_dev = dev_get_drvdata(dev);
|
|
bool val;
|
|
int ret;
|
|
|
|
ret = kstrtobool(buf, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
onboard_dev->always_powered_in_suspend = val;
|
|
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(always_powered_in_suspend);
|
|
|
|
static struct attribute *onboard_dev_attrs[] = {
|
|
&dev_attr_always_powered_in_suspend.attr,
|
|
NULL,
|
|
};
|
|
|
|
static umode_t onboard_dev_attrs_are_visible(struct kobject *kobj,
|
|
struct attribute *attr,
|
|
int n)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct onboard_dev *onboard_dev = dev_get_drvdata(dev);
|
|
|
|
if (attr == &dev_attr_always_powered_in_suspend.attr &&
|
|
!onboard_dev->pdata->is_hub)
|
|
return 0;
|
|
|
|
return attr->mode;
|
|
}
|
|
|
|
static const struct attribute_group onboard_dev_group = {
|
|
.is_visible = onboard_dev_attrs_are_visible,
|
|
.attrs = onboard_dev_attrs,
|
|
};
|
|
__ATTRIBUTE_GROUPS(onboard_dev);
|
|
|
|
|
|
static void onboard_dev_attach_usb_driver(struct work_struct *work)
|
|
{
|
|
int err;
|
|
|
|
err = driver_attach(&onboard_dev_usbdev_driver.driver);
|
|
if (err)
|
|
pr_err("Failed to attach USB driver: %pe\n", ERR_PTR(err));
|
|
}
|
|
|
|
static int onboard_dev_5744_i2c_init(struct i2c_client *client)
|
|
{
|
|
#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744)
|
|
struct device *dev = &client->dev;
|
|
int ret;
|
|
|
|
/*
|
|
* Set BYPASS_UDC_SUSPEND bit to ensure MCU is always enabled
|
|
* and ready to respond to SMBus runtime commands.
|
|
* The command writes 5 bytes to memory and single data byte in
|
|
* configuration register.
|
|
*/
|
|
char wr_buf[7] = {USB5744_CREG_MEM_ADDR, 5,
|
|
USB5744_CREG_WRITE, 1,
|
|
USB5744_CREG_RUNTIMEFLAGS2,
|
|
USB5744_CREG_RUNTIMEFLAGS2_LSB,
|
|
USB5744_CREG_BYPASS_UDC_SUSPEND};
|
|
|
|
ret = i2c_smbus_write_block_data(client, 0, sizeof(wr_buf), wr_buf);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "BYPASS_UDC_SUSPEND bit configuration failed\n");
|
|
|
|
ret = i2c_smbus_write_word_data(client, USB5744_CMD_CREG_ACCESS,
|
|
USB5744_CMD_CREG_ACCESS_LSB);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Configuration Register Access Command failed\n");
|
|
|
|
/* Send SMBus command to boot hub. */
|
|
ret = i2c_smbus_write_word_data(client, USB5744_CMD_ATTACH,
|
|
USB5744_CMD_ATTACH_LSB);
|
|
if (ret < 0)
|
|
return dev_err_probe(dev, ret, "USB Attach with SMBus command failed\n");
|
|
|
|
return ret;
|
|
#else
|
|
return -ENODEV;
|
|
#endif
|
|
}
|
|
|
|
static int onboard_dev_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct onboard_dev *onboard_dev;
|
|
struct device_node *i2c_node;
|
|
int err;
|
|
|
|
onboard_dev = devm_kzalloc(dev, sizeof(*onboard_dev), GFP_KERNEL);
|
|
if (!onboard_dev)
|
|
return -ENOMEM;
|
|
|
|
onboard_dev->pdata = device_get_match_data(dev);
|
|
if (!onboard_dev->pdata)
|
|
return -EINVAL;
|
|
|
|
if (!onboard_dev->pdata->is_hub)
|
|
onboard_dev->always_powered_in_suspend = true;
|
|
|
|
onboard_dev->dev = dev;
|
|
|
|
err = onboard_dev_get_regulators(onboard_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
onboard_dev->clk = devm_clk_get_optional(dev, NULL);
|
|
if (IS_ERR(onboard_dev->clk))
|
|
return dev_err_probe(dev, PTR_ERR(onboard_dev->clk),
|
|
"failed to get clock\n");
|
|
|
|
onboard_dev->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(onboard_dev->reset_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(onboard_dev->reset_gpio),
|
|
"failed to get reset GPIO\n");
|
|
|
|
mutex_init(&onboard_dev->lock);
|
|
INIT_LIST_HEAD(&onboard_dev->udev_list);
|
|
|
|
dev_set_drvdata(dev, onboard_dev);
|
|
|
|
err = onboard_dev_power_on(onboard_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
i2c_node = of_parse_phandle(pdev->dev.of_node, "i2c-bus", 0);
|
|
if (i2c_node) {
|
|
struct i2c_client *client = NULL;
|
|
|
|
#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744)
|
|
client = of_find_i2c_device_by_node(i2c_node);
|
|
#endif
|
|
of_node_put(i2c_node);
|
|
|
|
if (!client) {
|
|
err = -EPROBE_DEFER;
|
|
goto err_power_off;
|
|
}
|
|
|
|
if (of_device_is_compatible(pdev->dev.of_node, "usb424,2744") ||
|
|
of_device_is_compatible(pdev->dev.of_node, "usb424,5744"))
|
|
err = onboard_dev_5744_i2c_init(client);
|
|
|
|
put_device(&client->dev);
|
|
if (err < 0)
|
|
goto err_power_off;
|
|
}
|
|
|
|
/*
|
|
* The USB driver might have been detached from the USB devices by
|
|
* onboard_dev_remove() (e.g. through an 'unbind' by userspace),
|
|
* make sure to re-attach it if needed.
|
|
*
|
|
* This needs to be done deferred to avoid self-deadlocks on systems
|
|
* with nested onboard hubs.
|
|
*/
|
|
schedule_work(&attach_usb_driver_work);
|
|
|
|
return 0;
|
|
|
|
err_power_off:
|
|
onboard_dev_power_off(onboard_dev);
|
|
return err;
|
|
}
|
|
|
|
static void onboard_dev_remove(struct platform_device *pdev)
|
|
{
|
|
struct onboard_dev *onboard_dev = dev_get_drvdata(&pdev->dev);
|
|
struct usbdev_node *node;
|
|
struct usb_device *udev;
|
|
|
|
onboard_dev->going_away = true;
|
|
|
|
mutex_lock(&onboard_dev->lock);
|
|
|
|
/* unbind the USB devices to avoid dangling references to this device */
|
|
while (!list_empty(&onboard_dev->udev_list)) {
|
|
node = list_first_entry(&onboard_dev->udev_list,
|
|
struct usbdev_node, list);
|
|
udev = node->udev;
|
|
|
|
/*
|
|
* Unbinding the driver will call onboard_dev_remove_usbdev(),
|
|
* which acquires onboard_dev->lock. We must release the lock
|
|
* first.
|
|
*/
|
|
get_device(&udev->dev);
|
|
mutex_unlock(&onboard_dev->lock);
|
|
device_release_driver(&udev->dev);
|
|
put_device(&udev->dev);
|
|
mutex_lock(&onboard_dev->lock);
|
|
}
|
|
|
|
mutex_unlock(&onboard_dev->lock);
|
|
|
|
onboard_dev_power_off(onboard_dev);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, onboard_dev_match);
|
|
|
|
static const struct dev_pm_ops __maybe_unused onboard_dev_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(onboard_dev_suspend, onboard_dev_resume)
|
|
};
|
|
|
|
static struct platform_driver onboard_dev_driver = {
|
|
.probe = onboard_dev_probe,
|
|
.remove_new = onboard_dev_remove,
|
|
|
|
.driver = {
|
|
.name = "onboard-usb-dev",
|
|
.of_match_table = onboard_dev_match,
|
|
.pm = pm_ptr(&onboard_dev_pm_ops),
|
|
.dev_groups = onboard_dev_groups,
|
|
},
|
|
};
|
|
|
|
/************************** USB driver **************************/
|
|
|
|
#define VENDOR_ID_CYPRESS 0x04b4
|
|
#define VENDOR_ID_GENESYS 0x05e3
|
|
#define VENDOR_ID_MICROCHIP 0x0424
|
|
#define VENDOR_ID_REALTEK 0x0bda
|
|
#define VENDOR_ID_TI 0x0451
|
|
#define VENDOR_ID_VIA 0x2109
|
|
#define VENDOR_ID_XMOS 0x20B1
|
|
|
|
/*
|
|
* Returns the onboard_dev platform device that is associated with the USB
|
|
* device passed as parameter.
|
|
*/
|
|
static struct onboard_dev *_find_onboard_dev(struct device *dev)
|
|
{
|
|
struct platform_device *pdev;
|
|
struct device_node *np;
|
|
struct onboard_dev *onboard_dev;
|
|
|
|
pdev = of_find_device_by_node(dev->of_node);
|
|
if (!pdev) {
|
|
np = of_parse_phandle(dev->of_node, "peer-hub", 0);
|
|
if (!np) {
|
|
dev_err(dev, "failed to find device node for peer hub\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
pdev = of_find_device_by_node(np);
|
|
of_node_put(np);
|
|
|
|
if (!pdev)
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
onboard_dev = dev_get_drvdata(&pdev->dev);
|
|
put_device(&pdev->dev);
|
|
|
|
/*
|
|
* The presence of drvdata indicates that the platform driver finished
|
|
* probing. This handles the case where (conceivably) we could be
|
|
* running at the exact same time as the platform driver's probe. If
|
|
* we detect the race we request probe deferral and we'll come back and
|
|
* try again.
|
|
*/
|
|
if (!onboard_dev)
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
|
|
return onboard_dev;
|
|
}
|
|
|
|
static bool onboard_dev_usbdev_match(struct usb_device *udev)
|
|
{
|
|
/* Onboard devices using this driver must have a device tree node */
|
|
return !!udev->dev.of_node;
|
|
}
|
|
|
|
static int onboard_dev_usbdev_probe(struct usb_device *udev)
|
|
{
|
|
struct device *dev = &udev->dev;
|
|
struct onboard_dev *onboard_dev;
|
|
int err;
|
|
|
|
onboard_dev = _find_onboard_dev(dev);
|
|
if (IS_ERR(onboard_dev))
|
|
return PTR_ERR(onboard_dev);
|
|
|
|
dev_set_drvdata(dev, onboard_dev);
|
|
|
|
err = onboard_dev_add_usbdev(onboard_dev, udev);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void onboard_dev_usbdev_disconnect(struct usb_device *udev)
|
|
{
|
|
struct onboard_dev *onboard_dev = dev_get_drvdata(&udev->dev);
|
|
|
|
onboard_dev_remove_usbdev(onboard_dev, udev);
|
|
}
|
|
|
|
static const struct usb_device_id onboard_dev_id_table[] = {
|
|
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6570) }, /* CY7C6563x 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0620) }, /* Genesys Logic GL3523 USB 3.1 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2412) }, /* USB2412 USB 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2744) }, /* USB5744 USB 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x5744) }, /* USB5744 USB 3.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_TI, 0x8025) }, /* TI USB8020B 3.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 HUB */
|
|
{ USB_DEVICE(VENDOR_ID_XMOS, 0x0013) }, /* XMOS XVF3500 Voice Processor */
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, onboard_dev_id_table);
|
|
|
|
static struct usb_device_driver onboard_dev_usbdev_driver = {
|
|
.name = "onboard-usb-dev",
|
|
.match = onboard_dev_usbdev_match,
|
|
.probe = onboard_dev_usbdev_probe,
|
|
.disconnect = onboard_dev_usbdev_disconnect,
|
|
.generic_subclass = 1,
|
|
.supports_autosuspend = 1,
|
|
.id_table = onboard_dev_id_table,
|
|
};
|
|
|
|
static int __init onboard_dev_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb_register_device_driver(&onboard_dev_usbdev_driver, THIS_MODULE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&onboard_dev_driver);
|
|
if (ret)
|
|
usb_deregister_device_driver(&onboard_dev_usbdev_driver);
|
|
|
|
return ret;
|
|
}
|
|
module_init(onboard_dev_init);
|
|
|
|
static void __exit onboard_dev_exit(void)
|
|
{
|
|
usb_deregister_device_driver(&onboard_dev_usbdev_driver);
|
|
platform_driver_unregister(&onboard_dev_driver);
|
|
|
|
cancel_work_sync(&attach_usb_driver_work);
|
|
}
|
|
module_exit(onboard_dev_exit);
|
|
|
|
MODULE_AUTHOR("Matthias Kaehlcke <mka@chromium.org>");
|
|
MODULE_DESCRIPTION("Driver for discrete onboard USB devices");
|
|
MODULE_LICENSE("GPL v2");
|