mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
a0386bba70
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
317 lines
7.0 KiB
C
317 lines
7.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Support Infineon TLE62x0 driver chips
|
|
*
|
|
* Copyright (c) 2007 Simtec Electronics
|
|
* Ben Dooks, <ben@simtec.co.uk>
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tle62x0.h>
|
|
|
|
|
|
#define CMD_READ 0x00
|
|
#define CMD_SET 0xff
|
|
|
|
#define DIAG_NORMAL 0x03
|
|
#define DIAG_OVERLOAD 0x02
|
|
#define DIAG_OPEN 0x01
|
|
#define DIAG_SHORTGND 0x00
|
|
|
|
struct tle62x0_state {
|
|
struct spi_device *us;
|
|
struct mutex lock;
|
|
unsigned int nr_gpio;
|
|
unsigned int gpio_state;
|
|
|
|
unsigned char tx_buff[4];
|
|
unsigned char rx_buff[4];
|
|
};
|
|
|
|
static int to_gpio_num(struct device_attribute *attr);
|
|
|
|
static inline int tle62x0_write(struct tle62x0_state *st)
|
|
{
|
|
unsigned char *buff = st->tx_buff;
|
|
unsigned int gpio_state = st->gpio_state;
|
|
|
|
buff[0] = CMD_SET;
|
|
|
|
if (st->nr_gpio == 16) {
|
|
buff[1] = gpio_state >> 8;
|
|
buff[2] = gpio_state;
|
|
} else {
|
|
buff[1] = gpio_state;
|
|
}
|
|
|
|
dev_dbg(&st->us->dev, "buff %3ph\n", buff);
|
|
|
|
return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2);
|
|
}
|
|
|
|
static inline int tle62x0_read(struct tle62x0_state *st)
|
|
{
|
|
unsigned char *txbuff = st->tx_buff;
|
|
struct spi_transfer xfer = {
|
|
.tx_buf = txbuff,
|
|
.rx_buf = st->rx_buff,
|
|
.len = (st->nr_gpio * 2) / 8,
|
|
};
|
|
struct spi_message msg;
|
|
|
|
txbuff[0] = CMD_READ;
|
|
txbuff[1] = 0x00;
|
|
txbuff[2] = 0x00;
|
|
txbuff[3] = 0x00;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
return spi_sync(st->us, &msg);
|
|
}
|
|
|
|
static unsigned char *decode_fault(unsigned int fault_code)
|
|
{
|
|
fault_code &= 3;
|
|
|
|
switch (fault_code) {
|
|
case DIAG_NORMAL:
|
|
return "N";
|
|
case DIAG_OVERLOAD:
|
|
return "V";
|
|
case DIAG_OPEN:
|
|
return "O";
|
|
case DIAG_SHORTGND:
|
|
return "G";
|
|
}
|
|
|
|
return "?";
|
|
}
|
|
|
|
static ssize_t tle62x0_status_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tle62x0_state *st = dev_get_drvdata(dev);
|
|
char *bp = buf;
|
|
unsigned char *buff = st->rx_buff;
|
|
unsigned long fault = 0;
|
|
int ptr;
|
|
int ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
ret = tle62x0_read(st);
|
|
dev_dbg(dev, "tle62x0_read() returned %d\n", ret);
|
|
if (ret < 0) {
|
|
mutex_unlock(&st->lock);
|
|
return ret;
|
|
}
|
|
|
|
for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {
|
|
fault <<= 8;
|
|
fault |= ((unsigned long)buff[ptr]);
|
|
|
|
dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]);
|
|
}
|
|
|
|
for (ptr = 0; ptr < st->nr_gpio; ptr++) {
|
|
bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2)));
|
|
}
|
|
|
|
*bp++ = '\n';
|
|
|
|
mutex_unlock(&st->lock);
|
|
return bp - buf;
|
|
}
|
|
|
|
static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL);
|
|
|
|
static ssize_t tle62x0_gpio_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tle62x0_state *st = dev_get_drvdata(dev);
|
|
int gpio_num = to_gpio_num(attr);
|
|
int value;
|
|
|
|
mutex_lock(&st->lock);
|
|
value = (st->gpio_state >> gpio_num) & 1;
|
|
mutex_unlock(&st->lock);
|
|
|
|
return sysfs_emit(buf, "%d", value);
|
|
}
|
|
|
|
static ssize_t tle62x0_gpio_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct tle62x0_state *st = dev_get_drvdata(dev);
|
|
int gpio_num = to_gpio_num(attr);
|
|
unsigned long val;
|
|
char *endp;
|
|
|
|
val = simple_strtoul(buf, &endp, 0);
|
|
if (buf == endp)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val);
|
|
|
|
mutex_lock(&st->lock);
|
|
|
|
if (val)
|
|
st->gpio_state |= 1 << gpio_num;
|
|
else
|
|
st->gpio_state &= ~(1 << gpio_num);
|
|
|
|
tle62x0_write(st);
|
|
mutex_unlock(&st->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
|
|
static struct device_attribute *gpio_attrs[] = {
|
|
[0] = &dev_attr_gpio1,
|
|
[1] = &dev_attr_gpio2,
|
|
[2] = &dev_attr_gpio3,
|
|
[3] = &dev_attr_gpio4,
|
|
[4] = &dev_attr_gpio5,
|
|
[5] = &dev_attr_gpio6,
|
|
[6] = &dev_attr_gpio7,
|
|
[7] = &dev_attr_gpio8,
|
|
[8] = &dev_attr_gpio9,
|
|
[9] = &dev_attr_gpio10,
|
|
[10] = &dev_attr_gpio11,
|
|
[11] = &dev_attr_gpio12,
|
|
[12] = &dev_attr_gpio13,
|
|
[13] = &dev_attr_gpio14,
|
|
[14] = &dev_attr_gpio15,
|
|
[15] = &dev_attr_gpio16
|
|
};
|
|
|
|
static int to_gpio_num(struct device_attribute *attr)
|
|
{
|
|
int ptr;
|
|
|
|
for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) {
|
|
if (gpio_attrs[ptr] == attr)
|
|
return ptr;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int tle62x0_probe(struct spi_device *spi)
|
|
{
|
|
struct tle62x0_state *st;
|
|
struct tle62x0_pdata *pdata;
|
|
int ptr;
|
|
int ret;
|
|
|
|
pdata = dev_get_platdata(&spi->dev);
|
|
if (pdata == NULL) {
|
|
dev_err(&spi->dev, "no device data specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);
|
|
if (st == NULL)
|
|
return -ENOMEM;
|
|
|
|
st->us = spi;
|
|
st->nr_gpio = pdata->gpio_count;
|
|
st->gpio_state = pdata->init_state;
|
|
|
|
mutex_init(&st->lock);
|
|
|
|
ret = device_create_file(&spi->dev, &dev_attr_status_show);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "cannot create status attribute\n");
|
|
goto err_status;
|
|
}
|
|
|
|
for (ptr = 0; ptr < pdata->gpio_count; ptr++) {
|
|
ret = device_create_file(&spi->dev, gpio_attrs[ptr]);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "cannot create gpio attribute\n");
|
|
goto err_gpios;
|
|
}
|
|
}
|
|
|
|
/* tle62x0_write(st); */
|
|
spi_set_drvdata(spi, st);
|
|
return 0;
|
|
|
|
err_gpios:
|
|
while (--ptr >= 0)
|
|
device_remove_file(&spi->dev, gpio_attrs[ptr]);
|
|
|
|
device_remove_file(&spi->dev, &dev_attr_status_show);
|
|
|
|
err_status:
|
|
kfree(st);
|
|
return ret;
|
|
}
|
|
|
|
static void tle62x0_remove(struct spi_device *spi)
|
|
{
|
|
struct tle62x0_state *st = spi_get_drvdata(spi);
|
|
int ptr;
|
|
|
|
for (ptr = 0; ptr < st->nr_gpio; ptr++)
|
|
device_remove_file(&spi->dev, gpio_attrs[ptr]);
|
|
|
|
device_remove_file(&spi->dev, &dev_attr_status_show);
|
|
kfree(st);
|
|
}
|
|
|
|
static struct spi_driver tle62x0_driver = {
|
|
.driver = {
|
|
.name = "tle62x0",
|
|
},
|
|
.probe = tle62x0_probe,
|
|
.remove = tle62x0_remove,
|
|
};
|
|
|
|
module_spi_driver(tle62x0_driver);
|
|
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_DESCRIPTION("TLE62x0 SPI driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:tle62x0");
|