mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
494c3dc467
After commit 0edb555a65
("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/spi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
The change for the spi-npcm-fiu stands out in the diffstat because the
inconsistent formatting style of the platform_driver initializer is
fixed to match the other struct initializer in the file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240925113501.25208-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1374 lines
35 KiB
C
1374 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2008-2014, The Linux foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interconnect.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/spi/spi.h>
|
|
#include "internals.h"
|
|
|
|
#define QUP_CONFIG 0x0000
|
|
#define QUP_STATE 0x0004
|
|
#define QUP_IO_M_MODES 0x0008
|
|
#define QUP_SW_RESET 0x000c
|
|
#define QUP_OPERATIONAL 0x0018
|
|
#define QUP_ERROR_FLAGS 0x001c
|
|
#define QUP_ERROR_FLAGS_EN 0x0020
|
|
#define QUP_OPERATIONAL_MASK 0x0028
|
|
#define QUP_HW_VERSION 0x0030
|
|
#define QUP_MX_OUTPUT_CNT 0x0100
|
|
#define QUP_OUTPUT_FIFO 0x0110
|
|
#define QUP_MX_WRITE_CNT 0x0150
|
|
#define QUP_MX_INPUT_CNT 0x0200
|
|
#define QUP_MX_READ_CNT 0x0208
|
|
#define QUP_INPUT_FIFO 0x0218
|
|
|
|
#define SPI_CONFIG 0x0300
|
|
#define SPI_IO_CONTROL 0x0304
|
|
#define SPI_ERROR_FLAGS 0x0308
|
|
#define SPI_ERROR_FLAGS_EN 0x030c
|
|
|
|
/* QUP_CONFIG fields */
|
|
#define QUP_CONFIG_SPI_MODE (1 << 8)
|
|
#define QUP_CONFIG_CLOCK_AUTO_GATE BIT(13)
|
|
#define QUP_CONFIG_NO_INPUT BIT(7)
|
|
#define QUP_CONFIG_NO_OUTPUT BIT(6)
|
|
#define QUP_CONFIG_N 0x001f
|
|
|
|
/* QUP_STATE fields */
|
|
#define QUP_STATE_VALID BIT(2)
|
|
#define QUP_STATE_RESET 0
|
|
#define QUP_STATE_RUN 1
|
|
#define QUP_STATE_PAUSE 3
|
|
#define QUP_STATE_MASK 3
|
|
#define QUP_STATE_CLEAR 2
|
|
|
|
#define QUP_HW_VERSION_2_1_1 0x20010001
|
|
|
|
/* QUP_IO_M_MODES fields */
|
|
#define QUP_IO_M_PACK_EN BIT(15)
|
|
#define QUP_IO_M_UNPACK_EN BIT(14)
|
|
#define QUP_IO_M_INPUT_MODE_MASK_SHIFT 12
|
|
#define QUP_IO_M_OUTPUT_MODE_MASK_SHIFT 10
|
|
#define QUP_IO_M_INPUT_MODE_MASK (3 << QUP_IO_M_INPUT_MODE_MASK_SHIFT)
|
|
#define QUP_IO_M_OUTPUT_MODE_MASK (3 << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT)
|
|
|
|
#define QUP_IO_M_OUTPUT_BLOCK_SIZE(x) (((x) & (0x03 << 0)) >> 0)
|
|
#define QUP_IO_M_OUTPUT_FIFO_SIZE(x) (((x) & (0x07 << 2)) >> 2)
|
|
#define QUP_IO_M_INPUT_BLOCK_SIZE(x) (((x) & (0x03 << 5)) >> 5)
|
|
#define QUP_IO_M_INPUT_FIFO_SIZE(x) (((x) & (0x07 << 7)) >> 7)
|
|
|
|
#define QUP_IO_M_MODE_FIFO 0
|
|
#define QUP_IO_M_MODE_BLOCK 1
|
|
#define QUP_IO_M_MODE_DMOV 2
|
|
#define QUP_IO_M_MODE_BAM 3
|
|
|
|
/* QUP_OPERATIONAL fields */
|
|
#define QUP_OP_IN_BLOCK_READ_REQ BIT(13)
|
|
#define QUP_OP_OUT_BLOCK_WRITE_REQ BIT(12)
|
|
#define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11)
|
|
#define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10)
|
|
#define QUP_OP_IN_SERVICE_FLAG BIT(9)
|
|
#define QUP_OP_OUT_SERVICE_FLAG BIT(8)
|
|
#define QUP_OP_IN_FIFO_FULL BIT(7)
|
|
#define QUP_OP_OUT_FIFO_FULL BIT(6)
|
|
#define QUP_OP_IN_FIFO_NOT_EMPTY BIT(5)
|
|
#define QUP_OP_OUT_FIFO_NOT_EMPTY BIT(4)
|
|
|
|
/* QUP_ERROR_FLAGS and QUP_ERROR_FLAGS_EN fields */
|
|
#define QUP_ERROR_OUTPUT_OVER_RUN BIT(5)
|
|
#define QUP_ERROR_INPUT_UNDER_RUN BIT(4)
|
|
#define QUP_ERROR_OUTPUT_UNDER_RUN BIT(3)
|
|
#define QUP_ERROR_INPUT_OVER_RUN BIT(2)
|
|
|
|
/* SPI_CONFIG fields */
|
|
#define SPI_CONFIG_HS_MODE BIT(10)
|
|
#define SPI_CONFIG_INPUT_FIRST BIT(9)
|
|
#define SPI_CONFIG_LOOPBACK BIT(8)
|
|
|
|
/* SPI_IO_CONTROL fields */
|
|
#define SPI_IO_C_FORCE_CS BIT(11)
|
|
#define SPI_IO_C_CLK_IDLE_HIGH BIT(10)
|
|
#define SPI_IO_C_MX_CS_MODE BIT(8)
|
|
#define SPI_IO_C_CS_N_POLARITY_0 BIT(4)
|
|
#define SPI_IO_C_CS_SELECT(x) (((x) & 3) << 2)
|
|
#define SPI_IO_C_CS_SELECT_MASK 0x000c
|
|
#define SPI_IO_C_TRISTATE_CS BIT(1)
|
|
#define SPI_IO_C_NO_TRI_STATE BIT(0)
|
|
|
|
/* SPI_ERROR_FLAGS and SPI_ERROR_FLAGS_EN fields */
|
|
#define SPI_ERROR_CLK_OVER_RUN BIT(1)
|
|
#define SPI_ERROR_CLK_UNDER_RUN BIT(0)
|
|
|
|
#define SPI_NUM_CHIPSELECTS 4
|
|
|
|
#define SPI_MAX_XFER (SZ_64K - 64)
|
|
|
|
/* high speed mode is when bus rate is greater then 26MHz */
|
|
#define SPI_HS_MIN_RATE 26000000
|
|
#define SPI_MAX_RATE 50000000
|
|
|
|
#define SPI_DELAY_THRESHOLD 1
|
|
#define SPI_DELAY_RETRY 10
|
|
|
|
#define SPI_BUS_WIDTH 8
|
|
|
|
struct spi_qup {
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct clk *cclk; /* core clock */
|
|
struct clk *iclk; /* interface clock */
|
|
struct icc_path *icc_path; /* interconnect to RAM */
|
|
int irq;
|
|
spinlock_t lock;
|
|
|
|
int in_fifo_sz;
|
|
int out_fifo_sz;
|
|
int in_blk_sz;
|
|
int out_blk_sz;
|
|
|
|
struct spi_transfer *xfer;
|
|
struct completion done;
|
|
int error;
|
|
int w_size; /* bytes per SPI word */
|
|
int n_words;
|
|
int tx_bytes;
|
|
int rx_bytes;
|
|
const u8 *tx_buf;
|
|
u8 *rx_buf;
|
|
int qup_v1;
|
|
|
|
int mode;
|
|
struct dma_slave_config rx_conf;
|
|
struct dma_slave_config tx_conf;
|
|
|
|
u32 bw_speed_hz;
|
|
};
|
|
|
|
static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer);
|
|
|
|
static inline bool spi_qup_is_flag_set(struct spi_qup *controller, u32 flag)
|
|
{
|
|
u32 opflag = readl_relaxed(controller->base + QUP_OPERATIONAL);
|
|
|
|
return (opflag & flag) != 0;
|
|
}
|
|
|
|
static inline bool spi_qup_is_dma_xfer(int mode)
|
|
{
|
|
if (mode == QUP_IO_M_MODE_DMOV || mode == QUP_IO_M_MODE_BAM)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/* get's the transaction size length */
|
|
static inline unsigned int spi_qup_len(struct spi_qup *controller)
|
|
{
|
|
return controller->n_words * controller->w_size;
|
|
}
|
|
|
|
static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
|
|
{
|
|
u32 opstate = readl_relaxed(controller->base + QUP_STATE);
|
|
|
|
return opstate & QUP_STATE_VALID;
|
|
}
|
|
|
|
static int spi_qup_vote_bw(struct spi_qup *controller, u32 speed_hz)
|
|
{
|
|
u32 needed_peak_bw;
|
|
int ret;
|
|
|
|
if (controller->bw_speed_hz == speed_hz)
|
|
return 0;
|
|
|
|
needed_peak_bw = Bps_to_icc(speed_hz * SPI_BUS_WIDTH);
|
|
ret = icc_set_bw(controller->icc_path, 0, needed_peak_bw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
controller->bw_speed_hz = speed_hz;
|
|
return 0;
|
|
}
|
|
|
|
static int spi_qup_set_state(struct spi_qup *controller, u32 state)
|
|
{
|
|
unsigned long loop;
|
|
u32 cur_state;
|
|
|
|
loop = 0;
|
|
while (!spi_qup_is_valid_state(controller)) {
|
|
|
|
usleep_range(SPI_DELAY_THRESHOLD, SPI_DELAY_THRESHOLD * 2);
|
|
|
|
if (++loop > SPI_DELAY_RETRY)
|
|
return -EIO;
|
|
}
|
|
|
|
if (loop)
|
|
dev_dbg(controller->dev, "invalid state for %ld,us %d\n",
|
|
loop, state);
|
|
|
|
cur_state = readl_relaxed(controller->base + QUP_STATE);
|
|
/*
|
|
* Per spec: for PAUSE_STATE to RESET_STATE, two writes
|
|
* of (b10) are required
|
|
*/
|
|
if (((cur_state & QUP_STATE_MASK) == QUP_STATE_PAUSE) &&
|
|
(state == QUP_STATE_RESET)) {
|
|
writel_relaxed(QUP_STATE_CLEAR, controller->base + QUP_STATE);
|
|
writel_relaxed(QUP_STATE_CLEAR, controller->base + QUP_STATE);
|
|
} else {
|
|
cur_state &= ~QUP_STATE_MASK;
|
|
cur_state |= state;
|
|
writel_relaxed(cur_state, controller->base + QUP_STATE);
|
|
}
|
|
|
|
loop = 0;
|
|
while (!spi_qup_is_valid_state(controller)) {
|
|
|
|
usleep_range(SPI_DELAY_THRESHOLD, SPI_DELAY_THRESHOLD * 2);
|
|
|
|
if (++loop > SPI_DELAY_RETRY)
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spi_qup_read_from_fifo(struct spi_qup *controller, u32 num_words)
|
|
{
|
|
u8 *rx_buf = controller->rx_buf;
|
|
int i, shift, num_bytes;
|
|
u32 word;
|
|
|
|
for (; num_words; num_words--) {
|
|
|
|
word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
|
|
|
|
num_bytes = min_t(int, spi_qup_len(controller) -
|
|
controller->rx_bytes,
|
|
controller->w_size);
|
|
|
|
if (!rx_buf) {
|
|
controller->rx_bytes += num_bytes;
|
|
continue;
|
|
}
|
|
|
|
for (i = 0; i < num_bytes; i++, controller->rx_bytes++) {
|
|
/*
|
|
* The data format depends on bytes per SPI word:
|
|
* 4 bytes: 0x12345678
|
|
* 2 bytes: 0x00001234
|
|
* 1 byte : 0x00000012
|
|
*/
|
|
shift = BITS_PER_BYTE;
|
|
shift *= (controller->w_size - i - 1);
|
|
rx_buf[controller->rx_bytes] = word >> shift;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void spi_qup_read(struct spi_qup *controller, u32 *opflags)
|
|
{
|
|
u32 remainder, words_per_block, num_words;
|
|
bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
|
|
|
|
remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->rx_bytes,
|
|
controller->w_size);
|
|
words_per_block = controller->in_blk_sz >> 2;
|
|
|
|
do {
|
|
/* ACK by clearing service flag */
|
|
writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
|
|
controller->base + QUP_OPERATIONAL);
|
|
|
|
if (!remainder)
|
|
goto exit;
|
|
|
|
if (is_block_mode) {
|
|
num_words = (remainder > words_per_block) ?
|
|
words_per_block : remainder;
|
|
} else {
|
|
if (!spi_qup_is_flag_set(controller,
|
|
QUP_OP_IN_FIFO_NOT_EMPTY))
|
|
break;
|
|
|
|
num_words = 1;
|
|
}
|
|
|
|
/* read up to the maximum transfer size available */
|
|
spi_qup_read_from_fifo(controller, num_words);
|
|
|
|
remainder -= num_words;
|
|
|
|
/* if block mode, check to see if next block is available */
|
|
if (is_block_mode && !spi_qup_is_flag_set(controller,
|
|
QUP_OP_IN_BLOCK_READ_REQ))
|
|
break;
|
|
|
|
} while (remainder);
|
|
|
|
/*
|
|
* Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block
|
|
* reads, it has to be cleared again at the very end. However, be sure
|
|
* to refresh opflags value because MAX_INPUT_DONE_FLAG may now be
|
|
* present and this is used to determine if transaction is complete
|
|
*/
|
|
exit:
|
|
if (!remainder) {
|
|
*opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
|
|
if (is_block_mode && *opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
|
|
writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
|
|
controller->base + QUP_OPERATIONAL);
|
|
}
|
|
}
|
|
|
|
static void spi_qup_write_to_fifo(struct spi_qup *controller, u32 num_words)
|
|
{
|
|
const u8 *tx_buf = controller->tx_buf;
|
|
int i, num_bytes;
|
|
u32 word, data;
|
|
|
|
for (; num_words; num_words--) {
|
|
word = 0;
|
|
|
|
num_bytes = min_t(int, spi_qup_len(controller) -
|
|
controller->tx_bytes,
|
|
controller->w_size);
|
|
if (tx_buf)
|
|
for (i = 0; i < num_bytes; i++) {
|
|
data = tx_buf[controller->tx_bytes + i];
|
|
word |= data << (BITS_PER_BYTE * (3 - i));
|
|
}
|
|
|
|
controller->tx_bytes += num_bytes;
|
|
|
|
writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO);
|
|
}
|
|
}
|
|
|
|
static void spi_qup_dma_done(void *data)
|
|
{
|
|
struct spi_qup *qup = data;
|
|
|
|
complete(&qup->done);
|
|
}
|
|
|
|
static void spi_qup_write(struct spi_qup *controller)
|
|
{
|
|
bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
|
|
u32 remainder, words_per_block, num_words;
|
|
|
|
remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->tx_bytes,
|
|
controller->w_size);
|
|
words_per_block = controller->out_blk_sz >> 2;
|
|
|
|
do {
|
|
/* ACK by clearing service flag */
|
|
writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
|
|
controller->base + QUP_OPERATIONAL);
|
|
|
|
/* make sure the interrupt is valid */
|
|
if (!remainder)
|
|
return;
|
|
|
|
if (is_block_mode) {
|
|
num_words = (remainder > words_per_block) ?
|
|
words_per_block : remainder;
|
|
} else {
|
|
if (spi_qup_is_flag_set(controller,
|
|
QUP_OP_OUT_FIFO_FULL))
|
|
break;
|
|
|
|
num_words = 1;
|
|
}
|
|
|
|
spi_qup_write_to_fifo(controller, num_words);
|
|
|
|
remainder -= num_words;
|
|
|
|
/* if block mode, check to see if next block is available */
|
|
if (is_block_mode && !spi_qup_is_flag_set(controller,
|
|
QUP_OP_OUT_BLOCK_WRITE_REQ))
|
|
break;
|
|
|
|
} while (remainder);
|
|
}
|
|
|
|
static int spi_qup_prep_sg(struct spi_controller *host, struct scatterlist *sgl,
|
|
unsigned int nents, enum dma_transfer_direction dir,
|
|
dma_async_tx_callback callback)
|
|
{
|
|
struct spi_qup *qup = spi_controller_get_devdata(host);
|
|
unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
|
|
struct dma_async_tx_descriptor *desc;
|
|
struct dma_chan *chan;
|
|
dma_cookie_t cookie;
|
|
|
|
if (dir == DMA_MEM_TO_DEV)
|
|
chan = host->dma_tx;
|
|
else
|
|
chan = host->dma_rx;
|
|
|
|
desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
|
|
if (IS_ERR_OR_NULL(desc))
|
|
return desc ? PTR_ERR(desc) : -EINVAL;
|
|
|
|
desc->callback = callback;
|
|
desc->callback_param = qup;
|
|
|
|
cookie = dmaengine_submit(desc);
|
|
|
|
return dma_submit_error(cookie);
|
|
}
|
|
|
|
static void spi_qup_dma_terminate(struct spi_controller *host,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
if (xfer->tx_buf)
|
|
dmaengine_terminate_all(host->dma_tx);
|
|
if (xfer->rx_buf)
|
|
dmaengine_terminate_all(host->dma_rx);
|
|
}
|
|
|
|
static u32 spi_qup_sgl_get_nents_len(struct scatterlist *sgl, u32 max,
|
|
u32 *nents)
|
|
{
|
|
struct scatterlist *sg;
|
|
u32 total = 0;
|
|
|
|
for (sg = sgl; sg; sg = sg_next(sg)) {
|
|
unsigned int len = sg_dma_len(sg);
|
|
|
|
/* check for overflow as well as limit */
|
|
if (((total + len) < total) || ((total + len) > max))
|
|
break;
|
|
|
|
total += len;
|
|
(*nents)++;
|
|
}
|
|
|
|
return total;
|
|
}
|
|
|
|
static int spi_qup_do_dma(struct spi_device *spi, struct spi_transfer *xfer,
|
|
unsigned long timeout)
|
|
{
|
|
dma_async_tx_callback rx_done = NULL, tx_done = NULL;
|
|
struct spi_controller *host = spi->controller;
|
|
struct spi_qup *qup = spi_controller_get_devdata(host);
|
|
struct scatterlist *tx_sgl, *rx_sgl;
|
|
int ret;
|
|
|
|
ret = spi_qup_vote_bw(qup, xfer->speed_hz);
|
|
if (ret) {
|
|
dev_err(qup->dev, "fail to vote for ICC bandwidth: %d\n", ret);
|
|
return -EIO;
|
|
}
|
|
|
|
if (xfer->rx_buf)
|
|
rx_done = spi_qup_dma_done;
|
|
else if (xfer->tx_buf)
|
|
tx_done = spi_qup_dma_done;
|
|
|
|
rx_sgl = xfer->rx_sg.sgl;
|
|
tx_sgl = xfer->tx_sg.sgl;
|
|
|
|
do {
|
|
u32 rx_nents = 0, tx_nents = 0;
|
|
|
|
if (rx_sgl)
|
|
qup->n_words = spi_qup_sgl_get_nents_len(rx_sgl,
|
|
SPI_MAX_XFER, &rx_nents) / qup->w_size;
|
|
if (tx_sgl)
|
|
qup->n_words = spi_qup_sgl_get_nents_len(tx_sgl,
|
|
SPI_MAX_XFER, &tx_nents) / qup->w_size;
|
|
if (!qup->n_words)
|
|
return -EIO;
|
|
|
|
ret = spi_qup_io_config(spi, xfer);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* before issuing the descriptors, set the QUP to run */
|
|
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
|
|
if (ret) {
|
|
dev_warn(qup->dev, "cannot set RUN state\n");
|
|
return ret;
|
|
}
|
|
if (rx_sgl) {
|
|
ret = spi_qup_prep_sg(host, rx_sgl, rx_nents,
|
|
DMA_DEV_TO_MEM, rx_done);
|
|
if (ret)
|
|
return ret;
|
|
dma_async_issue_pending(host->dma_rx);
|
|
}
|
|
|
|
if (tx_sgl) {
|
|
ret = spi_qup_prep_sg(host, tx_sgl, tx_nents,
|
|
DMA_MEM_TO_DEV, tx_done);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dma_async_issue_pending(host->dma_tx);
|
|
}
|
|
|
|
if (!wait_for_completion_timeout(&qup->done, timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
for (; rx_sgl && rx_nents--; rx_sgl = sg_next(rx_sgl))
|
|
;
|
|
for (; tx_sgl && tx_nents--; tx_sgl = sg_next(tx_sgl))
|
|
;
|
|
|
|
} while (rx_sgl || tx_sgl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
|
|
unsigned long timeout)
|
|
{
|
|
struct spi_controller *host = spi->controller;
|
|
struct spi_qup *qup = spi_controller_get_devdata(host);
|
|
int ret, n_words, iterations, offset = 0;
|
|
|
|
n_words = qup->n_words;
|
|
iterations = n_words / SPI_MAX_XFER; /* round down */
|
|
qup->rx_buf = xfer->rx_buf;
|
|
qup->tx_buf = xfer->tx_buf;
|
|
|
|
do {
|
|
if (iterations)
|
|
qup->n_words = SPI_MAX_XFER;
|
|
else
|
|
qup->n_words = n_words % SPI_MAX_XFER;
|
|
|
|
if (qup->tx_buf && offset)
|
|
qup->tx_buf = xfer->tx_buf + offset * SPI_MAX_XFER;
|
|
|
|
if (qup->rx_buf && offset)
|
|
qup->rx_buf = xfer->rx_buf + offset * SPI_MAX_XFER;
|
|
|
|
/*
|
|
* if the transaction is small enough, we need
|
|
* to fallback to FIFO mode
|
|
*/
|
|
if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
|
|
qup->mode = QUP_IO_M_MODE_FIFO;
|
|
|
|
ret = spi_qup_io_config(spi, xfer);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
|
|
if (ret) {
|
|
dev_warn(qup->dev, "cannot set RUN state\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
|
|
if (ret) {
|
|
dev_warn(qup->dev, "cannot set PAUSE state\n");
|
|
return ret;
|
|
}
|
|
|
|
if (qup->mode == QUP_IO_M_MODE_FIFO)
|
|
spi_qup_write(qup);
|
|
|
|
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
|
|
if (ret) {
|
|
dev_warn(qup->dev, "cannot set RUN state\n");
|
|
return ret;
|
|
}
|
|
|
|
if (!wait_for_completion_timeout(&qup->done, timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
offset++;
|
|
} while (iterations--);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool spi_qup_data_pending(struct spi_qup *controller)
|
|
{
|
|
unsigned int remainder_tx, remainder_rx;
|
|
|
|
remainder_tx = DIV_ROUND_UP(spi_qup_len(controller) -
|
|
controller->tx_bytes, controller->w_size);
|
|
|
|
remainder_rx = DIV_ROUND_UP(spi_qup_len(controller) -
|
|
controller->rx_bytes, controller->w_size);
|
|
|
|
return remainder_tx || remainder_rx;
|
|
}
|
|
|
|
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
|
|
{
|
|
struct spi_qup *controller = dev_id;
|
|
u32 opflags, qup_err, spi_err;
|
|
int error = 0;
|
|
|
|
qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
|
|
spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
|
|
opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
|
|
|
|
writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
|
|
writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
|
|
|
|
if (qup_err) {
|
|
if (qup_err & QUP_ERROR_OUTPUT_OVER_RUN)
|
|
dev_warn(controller->dev, "OUTPUT_OVER_RUN\n");
|
|
if (qup_err & QUP_ERROR_INPUT_UNDER_RUN)
|
|
dev_warn(controller->dev, "INPUT_UNDER_RUN\n");
|
|
if (qup_err & QUP_ERROR_OUTPUT_UNDER_RUN)
|
|
dev_warn(controller->dev, "OUTPUT_UNDER_RUN\n");
|
|
if (qup_err & QUP_ERROR_INPUT_OVER_RUN)
|
|
dev_warn(controller->dev, "INPUT_OVER_RUN\n");
|
|
|
|
error = -EIO;
|
|
}
|
|
|
|
if (spi_err) {
|
|
if (spi_err & SPI_ERROR_CLK_OVER_RUN)
|
|
dev_warn(controller->dev, "CLK_OVER_RUN\n");
|
|
if (spi_err & SPI_ERROR_CLK_UNDER_RUN)
|
|
dev_warn(controller->dev, "CLK_UNDER_RUN\n");
|
|
|
|
error = -EIO;
|
|
}
|
|
|
|
spin_lock(&controller->lock);
|
|
if (!controller->error)
|
|
controller->error = error;
|
|
spin_unlock(&controller->lock);
|
|
|
|
if (spi_qup_is_dma_xfer(controller->mode)) {
|
|
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
|
|
} else {
|
|
if (opflags & QUP_OP_IN_SERVICE_FLAG)
|
|
spi_qup_read(controller, &opflags);
|
|
|
|
if (opflags & QUP_OP_OUT_SERVICE_FLAG)
|
|
spi_qup_write(controller);
|
|
|
|
if (!spi_qup_data_pending(controller))
|
|
complete(&controller->done);
|
|
}
|
|
|
|
if (error)
|
|
complete(&controller->done);
|
|
|
|
if (opflags & QUP_OP_MAX_INPUT_DONE_FLAG) {
|
|
if (!spi_qup_is_dma_xfer(controller->mode)) {
|
|
if (spi_qup_data_pending(controller))
|
|
return IRQ_HANDLED;
|
|
}
|
|
complete(&controller->done);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* set clock freq ... bits per word, determine mode */
|
|
static int spi_qup_io_prep(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct spi_qup *controller = spi_controller_get_devdata(spi->controller);
|
|
int ret;
|
|
|
|
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
|
|
dev_err(controller->dev, "too big size for loopback %d > %d\n",
|
|
xfer->len, controller->in_fifo_sz);
|
|
return -EIO;
|
|
}
|
|
|
|
ret = dev_pm_opp_set_rate(controller->dev, xfer->speed_hz);
|
|
if (ret) {
|
|
dev_err(controller->dev, "fail to set frequency %d",
|
|
xfer->speed_hz);
|
|
return -EIO;
|
|
}
|
|
|
|
controller->w_size = DIV_ROUND_UP(xfer->bits_per_word, 8);
|
|
controller->n_words = xfer->len / controller->w_size;
|
|
|
|
if (controller->n_words <= (controller->in_fifo_sz / sizeof(u32)))
|
|
controller->mode = QUP_IO_M_MODE_FIFO;
|
|
else if (spi_xfer_is_dma_mapped(spi->controller, spi, xfer))
|
|
controller->mode = QUP_IO_M_MODE_BAM;
|
|
else
|
|
controller->mode = QUP_IO_M_MODE_BLOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* prep qup for another spi transaction of specific type */
|
|
static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct spi_qup *controller = spi_controller_get_devdata(spi->controller);
|
|
u32 config, iomode, control;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&controller->lock, flags);
|
|
controller->xfer = xfer;
|
|
controller->error = 0;
|
|
controller->rx_bytes = 0;
|
|
controller->tx_bytes = 0;
|
|
spin_unlock_irqrestore(&controller->lock, flags);
|
|
|
|
|
|
if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
|
|
dev_err(controller->dev, "cannot set RESET state\n");
|
|
return -EIO;
|
|
}
|
|
|
|
switch (controller->mode) {
|
|
case QUP_IO_M_MODE_FIFO:
|
|
writel_relaxed(controller->n_words,
|
|
controller->base + QUP_MX_READ_CNT);
|
|
writel_relaxed(controller->n_words,
|
|
controller->base + QUP_MX_WRITE_CNT);
|
|
/* must be zero for FIFO */
|
|
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
|
|
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
|
|
break;
|
|
case QUP_IO_M_MODE_BAM:
|
|
writel_relaxed(controller->n_words,
|
|
controller->base + QUP_MX_INPUT_CNT);
|
|
writel_relaxed(controller->n_words,
|
|
controller->base + QUP_MX_OUTPUT_CNT);
|
|
/* must be zero for BLOCK and BAM */
|
|
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
|
|
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
|
|
|
|
if (!controller->qup_v1) {
|
|
void __iomem *input_cnt;
|
|
|
|
input_cnt = controller->base + QUP_MX_INPUT_CNT;
|
|
/*
|
|
* for DMA transfers, both QUP_MX_INPUT_CNT and
|
|
* QUP_MX_OUTPUT_CNT must be zero to all cases but one.
|
|
* That case is a non-balanced transfer when there is
|
|
* only a rx_buf.
|
|
*/
|
|
if (xfer->tx_buf)
|
|
writel_relaxed(0, input_cnt);
|
|
else
|
|
writel_relaxed(controller->n_words, input_cnt);
|
|
|
|
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
|
|
}
|
|
break;
|
|
case QUP_IO_M_MODE_BLOCK:
|
|
reinit_completion(&controller->done);
|
|
writel_relaxed(controller->n_words,
|
|
controller->base + QUP_MX_INPUT_CNT);
|
|
writel_relaxed(controller->n_words,
|
|
controller->base + QUP_MX_OUTPUT_CNT);
|
|
/* must be zero for BLOCK and BAM */
|
|
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
|
|
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
|
|
break;
|
|
default:
|
|
dev_err(controller->dev, "unknown mode = %d\n",
|
|
controller->mode);
|
|
return -EIO;
|
|
}
|
|
|
|
iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
|
|
/* Set input and output transfer mode */
|
|
iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
|
|
|
|
if (!spi_qup_is_dma_xfer(controller->mode))
|
|
iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
|
|
else
|
|
iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
|
|
|
|
iomode |= (controller->mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
|
|
iomode |= (controller->mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
|
|
|
|
writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
|
|
|
|
control = readl_relaxed(controller->base + SPI_IO_CONTROL);
|
|
|
|
if (spi->mode & SPI_CPOL)
|
|
control |= SPI_IO_C_CLK_IDLE_HIGH;
|
|
else
|
|
control &= ~SPI_IO_C_CLK_IDLE_HIGH;
|
|
|
|
writel_relaxed(control, controller->base + SPI_IO_CONTROL);
|
|
|
|
config = readl_relaxed(controller->base + SPI_CONFIG);
|
|
|
|
if (spi->mode & SPI_LOOP)
|
|
config |= SPI_CONFIG_LOOPBACK;
|
|
else
|
|
config &= ~SPI_CONFIG_LOOPBACK;
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
config &= ~SPI_CONFIG_INPUT_FIRST;
|
|
else
|
|
config |= SPI_CONFIG_INPUT_FIRST;
|
|
|
|
/*
|
|
* HS_MODE improves signal stability for spi-clk high rates,
|
|
* but is invalid in loop back mode.
|
|
*/
|
|
if ((xfer->speed_hz >= SPI_HS_MIN_RATE) && !(spi->mode & SPI_LOOP))
|
|
config |= SPI_CONFIG_HS_MODE;
|
|
else
|
|
config &= ~SPI_CONFIG_HS_MODE;
|
|
|
|
writel_relaxed(config, controller->base + SPI_CONFIG);
|
|
|
|
config = readl_relaxed(controller->base + QUP_CONFIG);
|
|
config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
|
|
config |= xfer->bits_per_word - 1;
|
|
config |= QUP_CONFIG_SPI_MODE;
|
|
|
|
if (spi_qup_is_dma_xfer(controller->mode)) {
|
|
if (!xfer->tx_buf)
|
|
config |= QUP_CONFIG_NO_OUTPUT;
|
|
if (!xfer->rx_buf)
|
|
config |= QUP_CONFIG_NO_INPUT;
|
|
}
|
|
|
|
writel_relaxed(config, controller->base + QUP_CONFIG);
|
|
|
|
/* only write to OPERATIONAL_MASK when register is present */
|
|
if (!controller->qup_v1) {
|
|
u32 mask = 0;
|
|
|
|
/*
|
|
* mask INPUT and OUTPUT service flags to prevent IRQs on FIFO
|
|
* status change in BAM mode
|
|
*/
|
|
|
|
if (spi_qup_is_dma_xfer(controller->mode))
|
|
mask = QUP_OP_IN_SERVICE_FLAG | QUP_OP_OUT_SERVICE_FLAG;
|
|
|
|
writel_relaxed(mask, controller->base + QUP_OPERATIONAL_MASK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_qup_transfer_one(struct spi_controller *host,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct spi_qup *controller = spi_controller_get_devdata(host);
|
|
unsigned long timeout, flags;
|
|
int ret;
|
|
|
|
ret = spi_qup_io_prep(spi, xfer);
|
|
if (ret)
|
|
return ret;
|
|
|
|
timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
|
|
timeout = DIV_ROUND_UP(min_t(unsigned long, SPI_MAX_XFER,
|
|
xfer->len) * 8, timeout);
|
|
timeout = 100 * msecs_to_jiffies(timeout);
|
|
|
|
reinit_completion(&controller->done);
|
|
|
|
spin_lock_irqsave(&controller->lock, flags);
|
|
controller->xfer = xfer;
|
|
controller->error = 0;
|
|
controller->rx_bytes = 0;
|
|
controller->tx_bytes = 0;
|
|
spin_unlock_irqrestore(&controller->lock, flags);
|
|
|
|
if (spi_qup_is_dma_xfer(controller->mode))
|
|
ret = spi_qup_do_dma(spi, xfer, timeout);
|
|
else
|
|
ret = spi_qup_do_pio(spi, xfer, timeout);
|
|
|
|
spi_qup_set_state(controller, QUP_STATE_RESET);
|
|
spin_lock_irqsave(&controller->lock, flags);
|
|
if (!ret)
|
|
ret = controller->error;
|
|
spin_unlock_irqrestore(&controller->lock, flags);
|
|
|
|
if (ret && spi_qup_is_dma_xfer(controller->mode))
|
|
spi_qup_dma_terminate(host, xfer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool spi_qup_can_dma(struct spi_controller *host, struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct spi_qup *qup = spi_controller_get_devdata(host);
|
|
size_t dma_align = dma_get_cache_alignment();
|
|
int n_words;
|
|
|
|
if (xfer->rx_buf) {
|
|
if (!IS_ALIGNED((size_t)xfer->rx_buf, dma_align) ||
|
|
IS_ERR_OR_NULL(host->dma_rx))
|
|
return false;
|
|
if (qup->qup_v1 && (xfer->len % qup->in_blk_sz))
|
|
return false;
|
|
}
|
|
|
|
if (xfer->tx_buf) {
|
|
if (!IS_ALIGNED((size_t)xfer->tx_buf, dma_align) ||
|
|
IS_ERR_OR_NULL(host->dma_tx))
|
|
return false;
|
|
if (qup->qup_v1 && (xfer->len % qup->out_blk_sz))
|
|
return false;
|
|
}
|
|
|
|
n_words = xfer->len / DIV_ROUND_UP(xfer->bits_per_word, 8);
|
|
if (n_words <= (qup->in_fifo_sz / sizeof(u32)))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void spi_qup_release_dma(struct spi_controller *host)
|
|
{
|
|
if (!IS_ERR_OR_NULL(host->dma_rx))
|
|
dma_release_channel(host->dma_rx);
|
|
if (!IS_ERR_OR_NULL(host->dma_tx))
|
|
dma_release_channel(host->dma_tx);
|
|
}
|
|
|
|
static int spi_qup_init_dma(struct spi_controller *host, resource_size_t base)
|
|
{
|
|
struct spi_qup *spi = spi_controller_get_devdata(host);
|
|
struct dma_slave_config *rx_conf = &spi->rx_conf,
|
|
*tx_conf = &spi->tx_conf;
|
|
struct device *dev = spi->dev;
|
|
int ret;
|
|
|
|
/* allocate dma resources, if available */
|
|
host->dma_rx = dma_request_chan(dev, "rx");
|
|
if (IS_ERR(host->dma_rx))
|
|
return PTR_ERR(host->dma_rx);
|
|
|
|
host->dma_tx = dma_request_chan(dev, "tx");
|
|
if (IS_ERR(host->dma_tx)) {
|
|
ret = PTR_ERR(host->dma_tx);
|
|
goto err_tx;
|
|
}
|
|
|
|
/* set DMA parameters */
|
|
rx_conf->direction = DMA_DEV_TO_MEM;
|
|
rx_conf->device_fc = 1;
|
|
rx_conf->src_addr = base + QUP_INPUT_FIFO;
|
|
rx_conf->src_maxburst = spi->in_blk_sz;
|
|
|
|
tx_conf->direction = DMA_MEM_TO_DEV;
|
|
tx_conf->device_fc = 1;
|
|
tx_conf->dst_addr = base + QUP_OUTPUT_FIFO;
|
|
tx_conf->dst_maxburst = spi->out_blk_sz;
|
|
|
|
ret = dmaengine_slave_config(host->dma_rx, rx_conf);
|
|
if (ret) {
|
|
dev_err(dev, "failed to configure RX channel\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = dmaengine_slave_config(host->dma_tx, tx_conf);
|
|
if (ret) {
|
|
dev_err(dev, "failed to configure TX channel\n");
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dma_release_channel(host->dma_tx);
|
|
err_tx:
|
|
dma_release_channel(host->dma_rx);
|
|
return ret;
|
|
}
|
|
|
|
static void spi_qup_set_cs(struct spi_device *spi, bool val)
|
|
{
|
|
struct spi_qup *controller;
|
|
u32 spi_ioc;
|
|
u32 spi_ioc_orig;
|
|
|
|
controller = spi_controller_get_devdata(spi->controller);
|
|
spi_ioc = readl_relaxed(controller->base + SPI_IO_CONTROL);
|
|
spi_ioc_orig = spi_ioc;
|
|
if (!val)
|
|
spi_ioc |= SPI_IO_C_FORCE_CS;
|
|
else
|
|
spi_ioc &= ~SPI_IO_C_FORCE_CS;
|
|
|
|
if (spi_ioc != spi_ioc_orig)
|
|
writel_relaxed(spi_ioc, controller->base + SPI_IO_CONTROL);
|
|
}
|
|
|
|
static int spi_qup_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *host;
|
|
struct icc_path *icc_path;
|
|
struct clk *iclk, *cclk;
|
|
struct spi_qup *controller;
|
|
struct resource *res;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
u32 max_freq, iomode, num_cs;
|
|
int ret, irq, size;
|
|
|
|
dev = &pdev->dev;
|
|
base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
cclk = devm_clk_get(dev, "core");
|
|
if (IS_ERR(cclk))
|
|
return PTR_ERR(cclk);
|
|
|
|
iclk = devm_clk_get(dev, "iface");
|
|
if (IS_ERR(iclk))
|
|
return PTR_ERR(iclk);
|
|
|
|
icc_path = devm_of_icc_get(dev, NULL);
|
|
if (IS_ERR(icc_path))
|
|
return dev_err_probe(dev, PTR_ERR(icc_path),
|
|
"failed to get interconnect path\n");
|
|
|
|
/* This is optional parameter */
|
|
if (of_property_read_u32(dev->of_node, "spi-max-frequency", &max_freq))
|
|
max_freq = SPI_MAX_RATE;
|
|
|
|
if (!max_freq || max_freq > SPI_MAX_RATE) {
|
|
dev_err(dev, "invalid clock frequency %d\n", max_freq);
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = devm_pm_opp_set_clkname(dev, "core");
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* OPP table is optional */
|
|
ret = devm_pm_opp_of_add_table(dev);
|
|
if (ret && ret != -ENODEV)
|
|
return dev_err_probe(dev, ret, "invalid OPP table\n");
|
|
|
|
host = spi_alloc_host(dev, sizeof(struct spi_qup));
|
|
if (!host) {
|
|
dev_err(dev, "cannot allocate host\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* use num-cs unless not present or out of range */
|
|
if (of_property_read_u32(dev->of_node, "num-cs", &num_cs) ||
|
|
num_cs > SPI_NUM_CHIPSELECTS)
|
|
host->num_chipselect = SPI_NUM_CHIPSELECTS;
|
|
else
|
|
host->num_chipselect = num_cs;
|
|
|
|
host->use_gpio_descriptors = true;
|
|
host->max_native_cs = SPI_NUM_CHIPSELECTS;
|
|
host->bus_num = pdev->id;
|
|
host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
|
|
host->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
host->max_speed_hz = max_freq;
|
|
host->transfer_one = spi_qup_transfer_one;
|
|
host->dev.of_node = pdev->dev.of_node;
|
|
host->auto_runtime_pm = true;
|
|
host->dma_alignment = dma_get_cache_alignment();
|
|
host->max_dma_len = SPI_MAX_XFER;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
controller = spi_controller_get_devdata(host);
|
|
|
|
controller->dev = dev;
|
|
controller->base = base;
|
|
controller->iclk = iclk;
|
|
controller->cclk = cclk;
|
|
controller->icc_path = icc_path;
|
|
controller->irq = irq;
|
|
|
|
ret = spi_qup_init_dma(host, res->start);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto error;
|
|
else if (!ret)
|
|
host->can_dma = spi_qup_can_dma;
|
|
|
|
controller->qup_v1 = (uintptr_t)of_device_get_match_data(dev);
|
|
|
|
if (!controller->qup_v1)
|
|
host->set_cs = spi_qup_set_cs;
|
|
|
|
spin_lock_init(&controller->lock);
|
|
init_completion(&controller->done);
|
|
|
|
ret = clk_prepare_enable(cclk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot enable core clock\n");
|
|
goto error_dma;
|
|
}
|
|
|
|
ret = clk_prepare_enable(iclk);
|
|
if (ret) {
|
|
clk_disable_unprepare(cclk);
|
|
dev_err(dev, "cannot enable iface clock\n");
|
|
goto error_dma;
|
|
}
|
|
|
|
iomode = readl_relaxed(base + QUP_IO_M_MODES);
|
|
|
|
size = QUP_IO_M_OUTPUT_BLOCK_SIZE(iomode);
|
|
if (size)
|
|
controller->out_blk_sz = size * 16;
|
|
else
|
|
controller->out_blk_sz = 4;
|
|
|
|
size = QUP_IO_M_INPUT_BLOCK_SIZE(iomode);
|
|
if (size)
|
|
controller->in_blk_sz = size * 16;
|
|
else
|
|
controller->in_blk_sz = 4;
|
|
|
|
size = QUP_IO_M_OUTPUT_FIFO_SIZE(iomode);
|
|
controller->out_fifo_sz = controller->out_blk_sz * (2 << size);
|
|
|
|
size = QUP_IO_M_INPUT_FIFO_SIZE(iomode);
|
|
controller->in_fifo_sz = controller->in_blk_sz * (2 << size);
|
|
|
|
dev_info(dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
|
|
controller->in_blk_sz, controller->in_fifo_sz,
|
|
controller->out_blk_sz, controller->out_fifo_sz);
|
|
|
|
writel_relaxed(1, base + QUP_SW_RESET);
|
|
|
|
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
|
|
if (ret) {
|
|
dev_err(dev, "cannot set RESET state\n");
|
|
goto error_clk;
|
|
}
|
|
|
|
writel_relaxed(0, base + QUP_OPERATIONAL);
|
|
writel_relaxed(0, base + QUP_IO_M_MODES);
|
|
|
|
if (!controller->qup_v1)
|
|
writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
|
|
|
|
writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN,
|
|
base + SPI_ERROR_FLAGS_EN);
|
|
|
|
/* if earlier version of the QUP, disable INPUT_OVERRUN */
|
|
if (controller->qup_v1)
|
|
writel_relaxed(QUP_ERROR_OUTPUT_OVER_RUN |
|
|
QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN,
|
|
base + QUP_ERROR_FLAGS_EN);
|
|
|
|
writel_relaxed(0, base + SPI_CONFIG);
|
|
writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
|
|
|
|
ret = devm_request_irq(dev, irq, spi_qup_qup_irq,
|
|
IRQF_TRIGGER_HIGH, pdev->name, controller);
|
|
if (ret)
|
|
goto error_clk;
|
|
|
|
pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
ret = devm_spi_register_controller(dev, host);
|
|
if (ret)
|
|
goto disable_pm;
|
|
|
|
return 0;
|
|
|
|
disable_pm:
|
|
pm_runtime_disable(&pdev->dev);
|
|
error_clk:
|
|
clk_disable_unprepare(cclk);
|
|
clk_disable_unprepare(iclk);
|
|
error_dma:
|
|
spi_qup_release_dma(host);
|
|
error:
|
|
spi_controller_put(host);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int spi_qup_pm_suspend_runtime(struct device *device)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(device);
|
|
struct spi_qup *controller = spi_controller_get_devdata(host);
|
|
u32 config;
|
|
|
|
/* Enable clocks auto gaiting */
|
|
config = readl(controller->base + QUP_CONFIG);
|
|
config |= QUP_CONFIG_CLOCK_AUTO_GATE;
|
|
writel_relaxed(config, controller->base + QUP_CONFIG);
|
|
|
|
clk_disable_unprepare(controller->cclk);
|
|
spi_qup_vote_bw(controller, 0);
|
|
clk_disable_unprepare(controller->iclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_qup_pm_resume_runtime(struct device *device)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(device);
|
|
struct spi_qup *controller = spi_controller_get_devdata(host);
|
|
u32 config;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(controller->iclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(controller->cclk);
|
|
if (ret) {
|
|
clk_disable_unprepare(controller->iclk);
|
|
return ret;
|
|
}
|
|
|
|
/* Disable clocks auto gaiting */
|
|
config = readl_relaxed(controller->base + QUP_CONFIG);
|
|
config &= ~QUP_CONFIG_CLOCK_AUTO_GATE;
|
|
writel_relaxed(config, controller->base + QUP_CONFIG);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int spi_qup_suspend(struct device *device)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(device);
|
|
struct spi_qup *controller = spi_controller_get_devdata(host);
|
|
int ret;
|
|
|
|
if (pm_runtime_suspended(device)) {
|
|
ret = spi_qup_pm_resume_runtime(device);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
ret = spi_controller_suspend(host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(controller->cclk);
|
|
spi_qup_vote_bw(controller, 0);
|
|
clk_disable_unprepare(controller->iclk);
|
|
return 0;
|
|
}
|
|
|
|
static int spi_qup_resume(struct device *device)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(device);
|
|
struct spi_qup *controller = spi_controller_get_devdata(host);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(controller->iclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(controller->cclk);
|
|
if (ret) {
|
|
clk_disable_unprepare(controller->iclk);
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
ret = spi_controller_resume(host);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
return 0;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(controller->cclk);
|
|
clk_disable_unprepare(controller->iclk);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static void spi_qup_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(&pdev->dev);
|
|
struct spi_qup *controller = spi_controller_get_devdata(host);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
|
|
if (ret >= 0) {
|
|
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to reset controller (%pe)\n",
|
|
ERR_PTR(ret));
|
|
|
|
clk_disable_unprepare(controller->cclk);
|
|
clk_disable_unprepare(controller->iclk);
|
|
} else {
|
|
dev_warn(&pdev->dev, "failed to resume, skip hw disable (%pe)\n",
|
|
ERR_PTR(ret));
|
|
}
|
|
|
|
spi_qup_release_dma(host);
|
|
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
}
|
|
|
|
static const struct of_device_id spi_qup_dt_match[] = {
|
|
{ .compatible = "qcom,spi-qup-v1.1.1", .data = (void *)1, },
|
|
{ .compatible = "qcom,spi-qup-v2.1.1", },
|
|
{ .compatible = "qcom,spi-qup-v2.2.1", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, spi_qup_dt_match);
|
|
|
|
static const struct dev_pm_ops spi_qup_dev_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(spi_qup_suspend, spi_qup_resume)
|
|
SET_RUNTIME_PM_OPS(spi_qup_pm_suspend_runtime,
|
|
spi_qup_pm_resume_runtime,
|
|
NULL)
|
|
};
|
|
|
|
static struct platform_driver spi_qup_driver = {
|
|
.driver = {
|
|
.name = "spi_qup",
|
|
.pm = &spi_qup_dev_pm_ops,
|
|
.of_match_table = spi_qup_dt_match,
|
|
},
|
|
.probe = spi_qup_probe,
|
|
.remove = spi_qup_remove,
|
|
};
|
|
module_platform_driver(spi_qup_driver);
|
|
|
|
MODULE_DESCRIPTION("Qualcomm SPI controller with QUP interface");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:spi_qup");
|