mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
494c3dc467
After commit 0edb555a65
("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/spi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
The change for the spi-npcm-fiu stands out in the diffstat because the
inconsistent formatting style of the platform_driver initializer is
fixed to match the other struct initializer in the file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240925113501.25208-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
269 lines
6.7 KiB
C
269 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs
|
|
*
|
|
* Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This driver has been based on the spi-gpio.c:
|
|
* Copyright (C) 2006,2008 David Brownell
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi-mem.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
|
|
#define DRV_NAME "ath79-spi"
|
|
|
|
#define ATH79_SPI_RRW_DELAY_FACTOR 12000
|
|
#define MHZ (1000 * 1000)
|
|
|
|
#define AR71XX_SPI_REG_FS 0x00 /* Function Select */
|
|
#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */
|
|
#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */
|
|
#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */
|
|
|
|
#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */
|
|
|
|
#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */
|
|
#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */
|
|
#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n))
|
|
|
|
struct ath79_spi {
|
|
struct spi_bitbang bitbang;
|
|
u32 ioc_base;
|
|
u32 reg_ctrl;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
unsigned int rrw_delay;
|
|
};
|
|
|
|
static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned int reg)
|
|
{
|
|
return ioread32(sp->base + reg);
|
|
}
|
|
|
|
static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned int reg, u32 val)
|
|
{
|
|
iowrite32(val, sp->base + reg);
|
|
}
|
|
|
|
static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi)
|
|
{
|
|
return spi_controller_get_devdata(spi->controller);
|
|
}
|
|
|
|
static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned int nsecs)
|
|
{
|
|
if (nsecs > sp->rrw_delay)
|
|
ndelay(nsecs - sp->rrw_delay);
|
|
}
|
|
|
|
static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
|
|
{
|
|
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
|
|
int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
|
|
u32 cs_bit = AR71XX_SPI_IOC_CS(spi_get_chipselect(spi, 0));
|
|
|
|
if (cs_high)
|
|
sp->ioc_base |= cs_bit;
|
|
else
|
|
sp->ioc_base &= ~cs_bit;
|
|
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
|
|
}
|
|
|
|
static void ath79_spi_enable(struct ath79_spi *sp)
|
|
{
|
|
/* enable GPIO mode */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
|
|
|
|
/* save CTRL register */
|
|
sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
|
|
sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
|
|
|
|
/* clear clk and mosi in the base state */
|
|
sp->ioc_base &= ~(AR71XX_SPI_IOC_DO | AR71XX_SPI_IOC_CLK);
|
|
|
|
/* TODO: setup speed? */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
|
|
}
|
|
|
|
static void ath79_spi_disable(struct ath79_spi *sp)
|
|
{
|
|
/* restore CTRL register */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
|
|
/* disable GPIO mode */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
|
|
}
|
|
|
|
static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned int nsecs,
|
|
u32 word, u8 bits, unsigned flags)
|
|
{
|
|
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
|
|
u32 ioc = sp->ioc_base;
|
|
|
|
/* clock starts at inactive polarity */
|
|
for (word <<= (32 - bits); likely(bits); bits--) {
|
|
u32 out;
|
|
|
|
if (word & (1 << 31))
|
|
out = ioc | AR71XX_SPI_IOC_DO;
|
|
else
|
|
out = ioc & ~AR71XX_SPI_IOC_DO;
|
|
|
|
/* setup MSB (to target) on trailing edge */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
|
|
ath79_spi_delay(sp, nsecs);
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
|
|
ath79_spi_delay(sp, nsecs);
|
|
if (bits == 1)
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
|
|
|
|
word <<= 1;
|
|
}
|
|
|
|
return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
|
|
}
|
|
|
|
static int ath79_exec_mem_op(struct spi_mem *mem,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct ath79_spi *sp = ath79_spidev_to_sp(mem->spi);
|
|
|
|
/* Ensures that reading is performed on device connected to hardware cs0 */
|
|
if (spi_get_chipselect(mem->spi, 0) || spi_get_csgpiod(mem->spi, 0))
|
|
return -ENOTSUPP;
|
|
|
|
/* Only use for fast-read op. */
|
|
if (op->cmd.opcode != 0x0b || op->data.dir != SPI_MEM_DATA_IN ||
|
|
op->addr.nbytes != 3 || op->dummy.nbytes != 1)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* disable GPIO mode */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
|
|
|
|
memcpy_fromio(op->data.buf.in, sp->base + op->addr.val, op->data.nbytes);
|
|
|
|
/* enable GPIO mode */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
|
|
|
|
/* restore IOC register */
|
|
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops ath79_mem_ops = {
|
|
.exec_op = ath79_exec_mem_op,
|
|
};
|
|
|
|
static int ath79_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *host;
|
|
struct ath79_spi *sp;
|
|
unsigned long rate;
|
|
int ret;
|
|
|
|
host = spi_alloc_host(&pdev->dev, sizeof(*sp));
|
|
if (host == NULL) {
|
|
dev_err(&pdev->dev, "failed to allocate spi host\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
sp = spi_controller_get_devdata(host);
|
|
host->dev.of_node = pdev->dev.of_node;
|
|
platform_set_drvdata(pdev, sp);
|
|
|
|
host->use_gpio_descriptors = true;
|
|
host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
|
|
host->flags = SPI_CONTROLLER_GPIO_SS;
|
|
host->num_chipselect = 3;
|
|
host->mem_ops = &ath79_mem_ops;
|
|
|
|
sp->bitbang.ctlr = host;
|
|
sp->bitbang.chipselect = ath79_spi_chipselect;
|
|
sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
|
|
sp->bitbang.flags = SPI_CS_HIGH;
|
|
|
|
sp->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(sp->base)) {
|
|
ret = PTR_ERR(sp->base);
|
|
goto err_put_host;
|
|
}
|
|
|
|
sp->clk = devm_clk_get_enabled(&pdev->dev, "ahb");
|
|
if (IS_ERR(sp->clk)) {
|
|
ret = PTR_ERR(sp->clk);
|
|
goto err_put_host;
|
|
}
|
|
|
|
rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
|
|
if (!rate) {
|
|
ret = -EINVAL;
|
|
goto err_put_host;
|
|
}
|
|
|
|
sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
|
|
dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
|
|
sp->rrw_delay);
|
|
|
|
ath79_spi_enable(sp);
|
|
ret = spi_bitbang_start(&sp->bitbang);
|
|
if (ret)
|
|
goto err_disable;
|
|
|
|
return 0;
|
|
|
|
err_disable:
|
|
ath79_spi_disable(sp);
|
|
err_put_host:
|
|
spi_controller_put(host);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath79_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct ath79_spi *sp = platform_get_drvdata(pdev);
|
|
|
|
spi_bitbang_stop(&sp->bitbang);
|
|
ath79_spi_disable(sp);
|
|
spi_controller_put(sp->bitbang.ctlr);
|
|
}
|
|
|
|
static void ath79_spi_shutdown(struct platform_device *pdev)
|
|
{
|
|
ath79_spi_remove(pdev);
|
|
}
|
|
|
|
static const struct of_device_id ath79_spi_of_match[] = {
|
|
{ .compatible = "qca,ar7100-spi", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ath79_spi_of_match);
|
|
|
|
static struct platform_driver ath79_spi_driver = {
|
|
.probe = ath79_spi_probe,
|
|
.remove = ath79_spi_remove,
|
|
.shutdown = ath79_spi_shutdown,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = ath79_spi_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(ath79_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("SPI controller driver for Atheros AR71XX/AR724X/AR913X");
|
|
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|