linux/drivers/scsi/qla2xxx/qla_sup.c
Quinn Tran 29e222085d scsi: qla2xxx: Fix flash read failure
Link up failure is observed as a result of flash read failure.  Current
code does not check flash read return code where it relies on FW checksum
to detect the problem.

Add check of flash read failure to detect the problem sooner.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202406210815.rPDRDMBi-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-07-10 22:44:10 -04:00

3683 lines
95 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*/
#include "qla_def.h"
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/uaccess.h>
/*
* NVRAM support routines
*/
/**
* qla2x00_lock_nvram_access() -
* @ha: HA context
*/
static void
qla2x00_lock_nvram_access(struct qla_hw_data *ha)
{
uint16_t data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
data = rd_reg_word(&reg->nvram);
while (data & NVR_BUSY) {
udelay(100);
data = rd_reg_word(&reg->nvram);
}
/* Lock resource */
wrt_reg_word(&reg->u.isp2300.host_semaphore, 0x1);
rd_reg_word(&reg->u.isp2300.host_semaphore);
udelay(5);
data = rd_reg_word(&reg->u.isp2300.host_semaphore);
while ((data & BIT_0) == 0) {
/* Lock failed */
udelay(100);
wrt_reg_word(&reg->u.isp2300.host_semaphore, 0x1);
rd_reg_word(&reg->u.isp2300.host_semaphore);
udelay(5);
data = rd_reg_word(&reg->u.isp2300.host_semaphore);
}
}
}
/**
* qla2x00_unlock_nvram_access() -
* @ha: HA context
*/
static void
qla2x00_unlock_nvram_access(struct qla_hw_data *ha)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
wrt_reg_word(&reg->u.isp2300.host_semaphore, 0);
rd_reg_word(&reg->u.isp2300.host_semaphore);
}
}
/**
* qla2x00_nv_write() - Prepare for NVRAM read/write operation.
* @ha: HA context
* @data: Serial interface selector
*/
static void
qla2x00_nv_write(struct qla_hw_data *ha, uint16_t data)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
wrt_reg_word(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
wrt_reg_word(&reg->nvram, data | NVR_SELECT | NVR_CLOCK |
NVR_WRT_ENABLE);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
wrt_reg_word(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
}
/**
* qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
* NVRAM.
* @ha: HA context
* @nv_cmd: NVRAM command
*
* Bit definitions for NVRAM command:
*
* Bit 26 = start bit
* Bit 25, 24 = opcode
* Bit 23-16 = address
* Bit 15-0 = write data
*
* Returns the word read from nvram @addr.
*/
static uint16_t
qla2x00_nvram_request(struct qla_hw_data *ha, uint32_t nv_cmd)
{
uint8_t cnt;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint16_t data = 0;
uint16_t reg_data;
/* Send command to NVRAM. */
nv_cmd <<= 5;
for (cnt = 0; cnt < 11; cnt++) {
if (nv_cmd & BIT_31)
qla2x00_nv_write(ha, NVR_DATA_OUT);
else
qla2x00_nv_write(ha, 0);
nv_cmd <<= 1;
}
/* Read data from NVRAM. */
for (cnt = 0; cnt < 16; cnt++) {
wrt_reg_word(&reg->nvram, NVR_SELECT | NVR_CLOCK);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
data <<= 1;
reg_data = rd_reg_word(&reg->nvram);
if (reg_data & NVR_DATA_IN)
data |= BIT_0;
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
}
/* Deselect chip. */
wrt_reg_word(&reg->nvram, NVR_DESELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
return data;
}
/**
* qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
* request routine to get the word from NVRAM.
* @ha: HA context
* @addr: Address in NVRAM to read
*
* Returns the word read from nvram @addr.
*/
static uint16_t
qla2x00_get_nvram_word(struct qla_hw_data *ha, uint32_t addr)
{
uint16_t data;
uint32_t nv_cmd;
nv_cmd = addr << 16;
nv_cmd |= NV_READ_OP;
data = qla2x00_nvram_request(ha, nv_cmd);
return (data);
}
/**
* qla2x00_nv_deselect() - Deselect NVRAM operations.
* @ha: HA context
*/
static void
qla2x00_nv_deselect(struct qla_hw_data *ha)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
wrt_reg_word(&reg->nvram, NVR_DESELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
}
/**
* qla2x00_write_nvram_word() - Write NVRAM data.
* @ha: HA context
* @addr: Address in NVRAM to write
* @data: word to program
*/
static void
qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, __le16 data)
{
int count;
uint16_t word;
uint32_t nv_cmd, wait_cnt;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_write(ha, 0);
qla2x00_nv_write(ha, 0);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_deselect(ha);
/* Write data */
nv_cmd = (addr << 16) | NV_WRITE_OP;
nv_cmd |= (__force u16)data;
nv_cmd <<= 5;
for (count = 0; count < 27; count++) {
if (nv_cmd & BIT_31)
qla2x00_nv_write(ha, NVR_DATA_OUT);
else
qla2x00_nv_write(ha, 0);
nv_cmd <<= 1;
}
qla2x00_nv_deselect(ha);
/* Wait for NVRAM to become ready */
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
ql_dbg(ql_dbg_user, vha, 0x708d,
"NVRAM didn't go ready...\n");
break;
}
NVRAM_DELAY();
word = rd_reg_word(&reg->nvram);
} while ((word & NVR_DATA_IN) == 0);
qla2x00_nv_deselect(ha);
/* Disable writes */
qla2x00_nv_write(ha, NVR_DATA_OUT);
for (count = 0; count < 10; count++)
qla2x00_nv_write(ha, 0);
qla2x00_nv_deselect(ha);
}
static int
qla2x00_write_nvram_word_tmo(struct qla_hw_data *ha, uint32_t addr,
__le16 data, uint32_t tmo)
{
int ret, count;
uint16_t word;
uint32_t nv_cmd;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
ret = QLA_SUCCESS;
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_write(ha, 0);
qla2x00_nv_write(ha, 0);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_deselect(ha);
/* Write data */
nv_cmd = (addr << 16) | NV_WRITE_OP;
nv_cmd |= (__force u16)data;
nv_cmd <<= 5;
for (count = 0; count < 27; count++) {
if (nv_cmd & BIT_31)
qla2x00_nv_write(ha, NVR_DATA_OUT);
else
qla2x00_nv_write(ha, 0);
nv_cmd <<= 1;
}
qla2x00_nv_deselect(ha);
/* Wait for NVRAM to become ready */
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
do {
NVRAM_DELAY();
word = rd_reg_word(&reg->nvram);
if (!--tmo) {
ret = QLA_FUNCTION_FAILED;
break;
}
} while ((word & NVR_DATA_IN) == 0);
qla2x00_nv_deselect(ha);
/* Disable writes */
qla2x00_nv_write(ha, NVR_DATA_OUT);
for (count = 0; count < 10; count++)
qla2x00_nv_write(ha, 0);
qla2x00_nv_deselect(ha);
return ret;
}
/**
* qla2x00_clear_nvram_protection() -
* @ha: HA context
*/
static int
qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
{
int ret, stat;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t word, wait_cnt;
__le16 wprot, wprot_old;
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
/* Clear NVRAM write protection. */
ret = QLA_FUNCTION_FAILED;
wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
cpu_to_le16(0x1234), 100000);
wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
if (stat != QLA_SUCCESS || wprot != cpu_to_le16(0x1234)) {
/* Write enable. */
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_write(ha, 0);
qla2x00_nv_write(ha, 0);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_deselect(ha);
/* Enable protection register. */
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
qla2x00_nv_write(ha, NVR_PR_ENABLE);
qla2x00_nv_write(ha, NVR_PR_ENABLE);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
qla2x00_nv_deselect(ha);
/* Clear protection register (ffff is cleared). */
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
qla2x00_nv_deselect(ha);
/* Wait for NVRAM to become ready. */
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
ql_dbg(ql_dbg_user, vha, 0x708e,
"NVRAM didn't go ready...\n");
break;
}
NVRAM_DELAY();
word = rd_reg_word(&reg->nvram);
} while ((word & NVR_DATA_IN) == 0);
if (wait_cnt)
ret = QLA_SUCCESS;
} else
qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
return ret;
}
static void
qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t word, wait_cnt;
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
if (stat != QLA_SUCCESS)
return;
/* Set NVRAM write protection. */
/* Write enable. */
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_write(ha, 0);
qla2x00_nv_write(ha, 0);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_deselect(ha);
/* Enable protection register. */
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
qla2x00_nv_write(ha, NVR_PR_ENABLE);
qla2x00_nv_write(ha, NVR_PR_ENABLE);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
qla2x00_nv_deselect(ha);
/* Enable protection register. */
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
qla2x00_nv_write(ha, NVR_PR_ENABLE);
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
for (word = 0; word < 8; word++)
qla2x00_nv_write(ha, NVR_PR_ENABLE);
qla2x00_nv_deselect(ha);
/* Wait for NVRAM to become ready. */
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
ql_dbg(ql_dbg_user, vha, 0x708f,
"NVRAM didn't go ready...\n");
break;
}
NVRAM_DELAY();
word = rd_reg_word(&reg->nvram);
} while ((word & NVR_DATA_IN) == 0);
}
/*****************************************************************************/
/* Flash Manipulation Routines */
/*****************************************************************************/
static inline uint32_t
flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr)
{
return ha->flash_conf_off + faddr;
}
static inline uint32_t
flash_data_addr(struct qla_hw_data *ha, uint32_t faddr)
{
return ha->flash_data_off + faddr;
}
static inline uint32_t
nvram_conf_addr(struct qla_hw_data *ha, uint32_t naddr)
{
return ha->nvram_conf_off + naddr;
}
static inline uint32_t
nvram_data_addr(struct qla_hw_data *ha, uint32_t naddr)
{
return ha->nvram_data_off + naddr;
}
static int
qla24xx_read_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t *data)
{
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
ulong cnt = 30000;
wrt_reg_dword(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
while (cnt--) {
if (rd_reg_dword(&reg->flash_addr) & FARX_DATA_FLAG) {
*data = rd_reg_dword(&reg->flash_data);
return QLA_SUCCESS;
}
udelay(10);
cond_resched();
}
ql_log(ql_log_warn, pci_get_drvdata(ha->pdev), 0x7090,
"Flash read dword at %x timeout.\n", addr);
*data = 0xDEADDEAD;
return QLA_FUNCTION_TIMEOUT;
}
int
qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
uint32_t dwords)
{
ulong i;
int ret = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
/* Dword reads to flash. */
faddr = flash_data_addr(ha, faddr);
for (i = 0; i < dwords; i++, faddr++, dwptr++) {
ret = qla24xx_read_flash_dword(ha, faddr, dwptr);
if (ret != QLA_SUCCESS)
break;
cpu_to_le32s(dwptr);
}
return ret;
}
static int
qla24xx_write_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t data)
{
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
ulong cnt = 500000;
wrt_reg_dword(&reg->flash_data, data);
wrt_reg_dword(&reg->flash_addr, addr | FARX_DATA_FLAG);
while (cnt--) {
if (!(rd_reg_dword(&reg->flash_addr) & FARX_DATA_FLAG))
return QLA_SUCCESS;
udelay(10);
cond_resched();
}
ql_log(ql_log_warn, pci_get_drvdata(ha->pdev), 0x7090,
"Flash write dword at %x timeout.\n", addr);
return QLA_FUNCTION_TIMEOUT;
}
static void
qla24xx_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
uint8_t *flash_id)
{
uint32_t faddr, ids = 0;
*man_id = *flash_id = 0;
faddr = flash_conf_addr(ha, 0x03ab);
if (!qla24xx_read_flash_dword(ha, faddr, &ids)) {
*man_id = LSB(ids);
*flash_id = MSB(ids);
}
/* Check if man_id and flash_id are valid. */
if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
/* Read information using 0x9f opcode
* Device ID, Mfg ID would be read in the format:
* <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
* Example: ATMEL 0x00 01 45 1F
* Extract MFG and Dev ID from last two bytes.
*/
faddr = flash_conf_addr(ha, 0x009f);
if (!qla24xx_read_flash_dword(ha, faddr, &ids)) {
*man_id = LSB(ids);
*flash_id = MSB(ids);
}
}
}
static int
qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start)
{
const char *loc, *locations[] = { "DEF", "PCI" };
uint32_t pcihdr, pcids;
uint16_t cnt, chksum;
__le16 *wptr;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
struct qla_flt_location *fltl = (void *)req->ring;
uint32_t *dcode = (uint32_t *)req->ring;
uint8_t *buf = (void *)req->ring, *bcode, last_image;
int rc;
/*
* FLT-location structure resides after the last PCI region.
*/
/* Begin with sane defaults. */
loc = locations[0];
*start = 0;
if (IS_QLA24XX_TYPE(ha))
*start = FA_FLASH_LAYOUT_ADDR_24;
else if (IS_QLA25XX(ha))
*start = FA_FLASH_LAYOUT_ADDR;
else if (IS_QLA81XX(ha))
*start = FA_FLASH_LAYOUT_ADDR_81;
else if (IS_P3P_TYPE(ha)) {
*start = FA_FLASH_LAYOUT_ADDR_82;
goto end;
} else if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
*start = FA_FLASH_LAYOUT_ADDR_83;
goto end;
} else if (IS_QLA28XX(ha)) {
*start = FA_FLASH_LAYOUT_ADDR_28;
goto end;
}
/* Begin with first PCI expansion ROM header. */
pcihdr = 0;
do {
/* Verify PCI expansion ROM header. */
rc = qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
if (rc) {
ql_log(ql_log_info, vha, 0x016d,
"Unable to read PCI Expansion Rom Header (%x).\n", rc);
return QLA_FUNCTION_FAILED;
}
bcode = buf + (pcihdr % 4);
if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa)
goto end;
/* Locate PCI data structure. */
pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
rc = qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
if (rc) {
ql_log(ql_log_info, vha, 0x0179,
"Unable to read PCI Data Structure (%x).\n", rc);
return QLA_FUNCTION_FAILED;
}
bcode = buf + (pcihdr % 4);
/* Validate signature of PCI data structure. */
if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
bcode[0x2] != 'I' || bcode[0x3] != 'R')
goto end;
last_image = bcode[0x15] & BIT_7;
/* Locate next PCI expansion ROM. */
pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
} while (!last_image);
/* Now verify FLT-location structure. */
rc = qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, sizeof(*fltl) >> 2);
if (rc) {
ql_log(ql_log_info, vha, 0x017a,
"Unable to read FLT (%x).\n", rc);
return QLA_FUNCTION_FAILED;
}
if (memcmp(fltl->sig, "QFLT", 4))
goto end;
wptr = (__force __le16 *)req->ring;
cnt = sizeof(*fltl) / sizeof(*wptr);
for (chksum = 0; cnt--; wptr++)
chksum += le16_to_cpu(*wptr);
if (chksum) {
ql_log(ql_log_fatal, vha, 0x0045,
"Inconsistent FLTL detected: checksum=0x%x.\n", chksum);
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010e,
fltl, sizeof(*fltl));
return QLA_FUNCTION_FAILED;
}
/* Good data. Use specified location. */
loc = locations[1];
*start = (le16_to_cpu(fltl->start_hi) << 16 |
le16_to_cpu(fltl->start_lo)) >> 2;
end:
ql_dbg(ql_dbg_init, vha, 0x0046,
"FLTL[%s] = 0x%x.\n",
loc, *start);
return QLA_SUCCESS;
}
static void
qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
{
const char *locations[] = { "DEF", "FLT" }, *loc = locations[1];
const uint32_t def_fw[] =
{ FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 };
const uint32_t def_boot[] =
{ FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
const uint32_t def_vpd_nvram[] =
{ FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
const uint32_t def_vpd0[] =
{ 0, 0, FA_VPD0_ADDR_81 };
const uint32_t def_vpd1[] =
{ 0, 0, FA_VPD1_ADDR_81 };
const uint32_t def_nvram0[] =
{ 0, 0, FA_NVRAM0_ADDR_81 };
const uint32_t def_nvram1[] =
{ 0, 0, FA_NVRAM1_ADDR_81 };
const uint32_t def_fdt[] =
{ FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
FA_FLASH_DESCR_ADDR_81 };
const uint32_t def_npiv_conf0[] =
{ FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR,
FA_NPIV_CONF0_ADDR_81 };
const uint32_t def_npiv_conf1[] =
{ FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
FA_NPIV_CONF1_ADDR_81 };
const uint32_t fcp_prio_cfg0[] =
{ FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
0 };
const uint32_t fcp_prio_cfg1[] =
{ FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
0 };
struct qla_hw_data *ha = vha->hw;
uint32_t def = IS_QLA81XX(ha) ? 2 : IS_QLA25XX(ha) ? 1 : 0;
struct qla_flt_header *flt = ha->flt;
struct qla_flt_region *region = &flt->region[0];
__le16 *wptr;
uint16_t cnt, chksum;
uint32_t start;
/* Assign FCP prio region since older adapters may not have FLT, or
FCP prio region in it's FLT.
*/
ha->flt_region_fcp_prio = (ha->port_no == 0) ?
fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
ha->flt_region_flt = flt_addr;
wptr = (__force __le16 *)ha->flt;
ha->isp_ops->read_optrom(vha, flt, flt_addr << 2,
(sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE));
if (le16_to_cpu(*wptr) == 0xffff)
goto no_flash_data;
if (flt->version != cpu_to_le16(1)) {
ql_log(ql_log_warn, vha, 0x0047,
"Unsupported FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
le16_to_cpu(flt->version), le16_to_cpu(flt->length),
le16_to_cpu(flt->checksum));
goto no_flash_data;
}
cnt = (sizeof(*flt) + le16_to_cpu(flt->length)) / sizeof(*wptr);
for (chksum = 0; cnt--; wptr++)
chksum += le16_to_cpu(*wptr);
if (chksum) {
ql_log(ql_log_fatal, vha, 0x0048,
"Inconsistent FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
le16_to_cpu(flt->version), le16_to_cpu(flt->length),
le16_to_cpu(flt->checksum));
goto no_flash_data;
}
cnt = le16_to_cpu(flt->length) / sizeof(*region);
for ( ; cnt; cnt--, region++) {
/* Store addresses as DWORD offsets. */
start = le32_to_cpu(region->start) >> 2;
ql_dbg(ql_dbg_init, vha, 0x0049,
"FLT[%#x]: start=%#x end=%#x size=%#x.\n",
le16_to_cpu(region->code), start,
le32_to_cpu(region->end) >> 2,
le32_to_cpu(region->size) >> 2);
if (region->attribute)
ql_log(ql_dbg_init, vha, 0xffff,
"Region %x is secure\n", region->code);
switch (le16_to_cpu(region->code)) {
case FLT_REG_FCOE_FW:
if (!IS_QLA8031(ha))
break;
ha->flt_region_fw = start;
break;
case FLT_REG_FW:
if (IS_QLA8031(ha))
break;
ha->flt_region_fw = start;
break;
case FLT_REG_BOOT_CODE:
ha->flt_region_boot = start;
break;
case FLT_REG_VPD_0:
if (IS_QLA8031(ha))
break;
ha->flt_region_vpd_nvram = start;
if (IS_P3P_TYPE(ha))
break;
if (ha->port_no == 0)
ha->flt_region_vpd = start;
break;
case FLT_REG_VPD_1:
if (IS_P3P_TYPE(ha) || IS_QLA8031(ha))
break;
if (ha->port_no == 1)
ha->flt_region_vpd = start;
break;
case FLT_REG_VPD_2:
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
break;
if (ha->port_no == 2)
ha->flt_region_vpd = start;
break;
case FLT_REG_VPD_3:
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
break;
if (ha->port_no == 3)
ha->flt_region_vpd = start;
break;
case FLT_REG_NVRAM_0:
if (IS_QLA8031(ha))
break;
if (ha->port_no == 0)
ha->flt_region_nvram = start;
break;
case FLT_REG_NVRAM_1:
if (IS_QLA8031(ha))
break;
if (ha->port_no == 1)
ha->flt_region_nvram = start;
break;
case FLT_REG_NVRAM_2:
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
break;
if (ha->port_no == 2)
ha->flt_region_nvram = start;
break;
case FLT_REG_NVRAM_3:
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
break;
if (ha->port_no == 3)
ha->flt_region_nvram = start;
break;
case FLT_REG_FDT:
ha->flt_region_fdt = start;
break;
case FLT_REG_NPIV_CONF_0:
if (ha->port_no == 0)
ha->flt_region_npiv_conf = start;
break;
case FLT_REG_NPIV_CONF_1:
if (ha->port_no == 1)
ha->flt_region_npiv_conf = start;
break;
case FLT_REG_GOLD_FW:
ha->flt_region_gold_fw = start;
break;
case FLT_REG_FCP_PRIO_0:
if (ha->port_no == 0)
ha->flt_region_fcp_prio = start;
break;
case FLT_REG_FCP_PRIO_1:
if (ha->port_no == 1)
ha->flt_region_fcp_prio = start;
break;
case FLT_REG_BOOT_CODE_82XX:
ha->flt_region_boot = start;
break;
case FLT_REG_BOOT_CODE_8044:
if (IS_QLA8044(ha))
ha->flt_region_boot = start;
break;
case FLT_REG_FW_82XX:
ha->flt_region_fw = start;
break;
case FLT_REG_CNA_FW:
if (IS_CNA_CAPABLE(ha))
ha->flt_region_fw = start;
break;
case FLT_REG_GOLD_FW_82XX:
ha->flt_region_gold_fw = start;
break;
case FLT_REG_BOOTLOAD_82XX:
ha->flt_region_bootload = start;
break;
case FLT_REG_VPD_8XXX:
if (IS_CNA_CAPABLE(ha))
ha->flt_region_vpd = start;
break;
case FLT_REG_FCOE_NVRAM_0:
if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
break;
if (ha->port_no == 0)
ha->flt_region_nvram = start;
break;
case FLT_REG_FCOE_NVRAM_1:
if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
break;
if (ha->port_no == 1)
ha->flt_region_nvram = start;
break;
case FLT_REG_IMG_PRI_27XX:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_img_status_pri = start;
break;
case FLT_REG_IMG_SEC_27XX:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_img_status_sec = start;
break;
case FLT_REG_FW_SEC_27XX:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_fw_sec = start;
break;
case FLT_REG_BOOTLOAD_SEC_27XX:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_boot_sec = start;
break;
case FLT_REG_AUX_IMG_PRI_28XX:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_aux_img_status_pri = start;
break;
case FLT_REG_AUX_IMG_SEC_28XX:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_aux_img_status_sec = start;
break;
case FLT_REG_NVRAM_SEC_28XX_0:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 0)
ha->flt_region_nvram_sec = start;
break;
case FLT_REG_NVRAM_SEC_28XX_1:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 1)
ha->flt_region_nvram_sec = start;
break;
case FLT_REG_NVRAM_SEC_28XX_2:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 2)
ha->flt_region_nvram_sec = start;
break;
case FLT_REG_NVRAM_SEC_28XX_3:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 3)
ha->flt_region_nvram_sec = start;
break;
case FLT_REG_VPD_SEC_27XX_0:
case FLT_REG_VPD_SEC_28XX_0:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
ha->flt_region_vpd_nvram_sec = start;
if (ha->port_no == 0)
ha->flt_region_vpd_sec = start;
}
break;
case FLT_REG_VPD_SEC_27XX_1:
case FLT_REG_VPD_SEC_28XX_1:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 1)
ha->flt_region_vpd_sec = start;
break;
case FLT_REG_VPD_SEC_27XX_2:
case FLT_REG_VPD_SEC_28XX_2:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 2)
ha->flt_region_vpd_sec = start;
break;
case FLT_REG_VPD_SEC_27XX_3:
case FLT_REG_VPD_SEC_28XX_3:
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
if (ha->port_no == 3)
ha->flt_region_vpd_sec = start;
break;
}
}
goto done;
no_flash_data:
/* Use hardcoded defaults. */
loc = locations[0];
ha->flt_region_fw = def_fw[def];
ha->flt_region_boot = def_boot[def];
ha->flt_region_vpd_nvram = def_vpd_nvram[def];
ha->flt_region_vpd = (ha->port_no == 0) ?
def_vpd0[def] : def_vpd1[def];
ha->flt_region_nvram = (ha->port_no == 0) ?
def_nvram0[def] : def_nvram1[def];
ha->flt_region_fdt = def_fdt[def];
ha->flt_region_npiv_conf = (ha->port_no == 0) ?
def_npiv_conf0[def] : def_npiv_conf1[def];
done:
ql_dbg(ql_dbg_init, vha, 0x004a,
"FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x nvram=0x%x "
"fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n",
loc, ha->flt_region_boot, ha->flt_region_fw,
ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf,
ha->flt_region_fcp_prio);
}
static void
qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
{
#define FLASH_BLK_SIZE_4K 0x1000
#define FLASH_BLK_SIZE_32K 0x8000
#define FLASH_BLK_SIZE_64K 0x10000
const char *loc, *locations[] = { "MID", "FDT" };
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
uint16_t cnt, chksum;
__le16 *wptr = (__force __le16 *)req->ring;
struct qla_fdt_layout *fdt = (struct qla_fdt_layout *)req->ring;
uint8_t man_id, flash_id;
uint16_t mid = 0, fid = 0;
ha->isp_ops->read_optrom(vha, fdt, ha->flt_region_fdt << 2,
OPTROM_BURST_DWORDS);
if (le16_to_cpu(*wptr) == 0xffff)
goto no_flash_data;
if (memcmp(fdt->sig, "QLID", 4))
goto no_flash_data;
for (cnt = 0, chksum = 0; cnt < sizeof(*fdt) >> 1; cnt++, wptr++)
chksum += le16_to_cpu(*wptr);
if (chksum) {
ql_dbg(ql_dbg_init, vha, 0x004c,
"Inconsistent FDT detected:"
" checksum=0x%x id=%c version0x%x.\n", chksum,
fdt->sig[0], le16_to_cpu(fdt->version));
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0113,
fdt, sizeof(*fdt));
goto no_flash_data;
}
loc = locations[1];
mid = le16_to_cpu(fdt->man_id);
fid = le16_to_cpu(fdt->id);
ha->fdt_wrt_disable = fdt->wrt_disable_bits;
ha->fdt_wrt_enable = fdt->wrt_enable_bits;
ha->fdt_wrt_sts_reg_cmd = fdt->wrt_sts_reg_cmd;
if (IS_QLA8044(ha))
ha->fdt_erase_cmd = fdt->erase_cmd;
else
ha->fdt_erase_cmd =
flash_conf_addr(ha, 0x0300 | fdt->erase_cmd);
ha->fdt_block_size = le32_to_cpu(fdt->block_size);
if (fdt->unprotect_sec_cmd) {
ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
fdt->unprotect_sec_cmd);
ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd) :
flash_conf_addr(ha, 0x0336);
}
goto done;
no_flash_data:
loc = locations[0];
if (IS_P3P_TYPE(ha)) {
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
goto done;
}
qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
mid = man_id;
fid = flash_id;
ha->fdt_wrt_disable = 0x9c;
ha->fdt_erase_cmd = flash_conf_addr(ha, 0x03d8);
switch (man_id) {
case 0xbf: /* STT flash. */
if (flash_id == 0x8e)
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
else
ha->fdt_block_size = FLASH_BLK_SIZE_32K;
if (flash_id == 0x80)
ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0352);
break;
case 0x13: /* ST M25P80. */
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
break;
case 0x1f: /* Atmel 26DF081A. */
ha->fdt_block_size = FLASH_BLK_SIZE_4K;
ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0320);
ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0339);
ha->fdt_protect_sec_cmd = flash_conf_addr(ha, 0x0336);
break;
default:
/* Default to 64 kb sector size. */
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
break;
}
done:
ql_dbg(ql_dbg_init, vha, 0x004d,
"FDT[%s]: (0x%x/0x%x) erase=0x%x "
"pr=%x wrtd=0x%x blk=0x%x.\n",
loc, mid, fid,
ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
ha->fdt_wrt_disable, ha->fdt_block_size);
}
static void
qla2xxx_get_idc_param(scsi_qla_host_t *vha)
{
#define QLA82XX_IDC_PARAM_ADDR 0x003e885c
__le32 *wptr;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
if (!(IS_P3P_TYPE(ha)))
return;
wptr = (__force __le32 *)req->ring;
ha->isp_ops->read_optrom(vha, req->ring, QLA82XX_IDC_PARAM_ADDR, 8);
if (*wptr == cpu_to_le32(0xffffffff)) {
ha->fcoe_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
ha->fcoe_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
} else {
ha->fcoe_dev_init_timeout = le32_to_cpu(*wptr);
wptr++;
ha->fcoe_reset_timeout = le32_to_cpu(*wptr);
}
ql_dbg(ql_dbg_init, vha, 0x004e,
"fcoe_dev_init_timeout=%d "
"fcoe_reset_timeout=%d.\n", ha->fcoe_dev_init_timeout,
ha->fcoe_reset_timeout);
return;
}
int
qla2xxx_get_flash_info(scsi_qla_host_t *vha)
{
int ret;
uint32_t flt_addr;
struct qla_hw_data *ha = vha->hw;
if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
!IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) &&
!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
return QLA_SUCCESS;
ret = qla2xxx_find_flt_start(vha, &flt_addr);
if (ret != QLA_SUCCESS)
return ret;
qla2xxx_get_flt_info(vha, flt_addr);
qla2xxx_get_fdt_info(vha);
qla2xxx_get_idc_param(vha);
return QLA_SUCCESS;
}
void
qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
{
#define NPIV_CONFIG_SIZE (16*1024)
void *data;
__le16 *wptr;
uint16_t cnt, chksum;
int i;
struct qla_npiv_header hdr;
struct qla_npiv_entry *entry;
struct qla_hw_data *ha = vha->hw;
if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
!IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha))
return;
if (ha->flags.nic_core_reset_hdlr_active)
return;
if (IS_QLA8044(ha))
return;
ha->isp_ops->read_optrom(vha, &hdr, ha->flt_region_npiv_conf << 2,
sizeof(struct qla_npiv_header));
if (hdr.version == cpu_to_le16(0xffff))
return;
if (hdr.version != cpu_to_le16(1)) {
ql_dbg(ql_dbg_user, vha, 0x7090,
"Unsupported NPIV-Config "
"detected: version=0x%x entries=0x%x checksum=0x%x.\n",
le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
le16_to_cpu(hdr.checksum));
return;
}
data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL);
if (!data) {
ql_log(ql_log_warn, vha, 0x7091,
"Unable to allocate memory for data.\n");
return;
}
ha->isp_ops->read_optrom(vha, data, ha->flt_region_npiv_conf << 2,
NPIV_CONFIG_SIZE);
cnt = (sizeof(hdr) + le16_to_cpu(hdr.entries) * sizeof(*entry)) >> 1;
for (wptr = data, chksum = 0; cnt--; wptr++)
chksum += le16_to_cpu(*wptr);
if (chksum) {
ql_dbg(ql_dbg_user, vha, 0x7092,
"Inconsistent NPIV-Config "
"detected: version=0x%x entries=0x%x checksum=0x%x.\n",
le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
le16_to_cpu(hdr.checksum));
goto done;
}
entry = data + sizeof(struct qla_npiv_header);
cnt = le16_to_cpu(hdr.entries);
for (i = 0; cnt; cnt--, entry++, i++) {
uint16_t flags;
struct fc_vport_identifiers vid;
struct fc_vport *vport;
memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
flags = le16_to_cpu(entry->flags);
if (flags == 0xffff)
continue;
if ((flags & BIT_0) == 0)
continue;
memset(&vid, 0, sizeof(vid));
vid.roles = FC_PORT_ROLE_FCP_INITIATOR;
vid.vport_type = FC_PORTTYPE_NPIV;
vid.disable = false;
vid.port_name = wwn_to_u64(entry->port_name);
vid.node_name = wwn_to_u64(entry->node_name);
ql_dbg(ql_dbg_user, vha, 0x7093,
"NPIV[%02x]: wwpn=%llx wwnn=%llx vf_id=%#x Q_qos=%#x F_qos=%#x.\n",
cnt, vid.port_name, vid.node_name,
le16_to_cpu(entry->vf_id),
entry->q_qos, entry->f_qos);
if (i < QLA_PRECONFIG_VPORTS) {
vport = fc_vport_create(vha->host, 0, &vid);
if (!vport)
ql_log(ql_log_warn, vha, 0x7094,
"NPIV-Config Failed to create vport [%02x]: wwpn=%llx wwnn=%llx.\n",
cnt, vid.port_name, vid.node_name);
}
}
done:
kfree(data);
}
static int
qla24xx_unprotect_flash(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
if (ha->flags.fac_supported)
return qla81xx_fac_do_write_enable(vha, 1);
/* Enable flash write. */
wrt_reg_dword(&reg->ctrl_status,
rd_reg_dword(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
rd_reg_dword(&reg->ctrl_status); /* PCI Posting. */
if (!ha->fdt_wrt_disable)
goto done;
/* Disable flash write-protection, first clear SR protection bit */
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
/* Then write zero again to clear remaining SR bits.*/
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
done:
return QLA_SUCCESS;
}
static int
qla24xx_protect_flash(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
ulong cnt = 300;
uint32_t faddr, dword;
if (ha->flags.fac_supported)
return qla81xx_fac_do_write_enable(vha, 0);
if (!ha->fdt_wrt_disable)
goto skip_wrt_protect;
/* Enable flash write-protection and wait for completion. */
faddr = flash_conf_addr(ha, 0x101);
qla24xx_write_flash_dword(ha, faddr, ha->fdt_wrt_disable);
faddr = flash_conf_addr(ha, 0x5);
while (cnt--) {
if (!qla24xx_read_flash_dword(ha, faddr, &dword)) {
if (!(dword & BIT_0))
break;
}
udelay(10);
}
skip_wrt_protect:
/* Disable flash write. */
wrt_reg_dword(&reg->ctrl_status,
rd_reg_dword(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
return QLA_SUCCESS;
}
static int
qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata)
{
struct qla_hw_data *ha = vha->hw;
uint32_t start, finish;
if (ha->flags.fac_supported) {
start = fdata >> 2;
finish = start + (ha->fdt_block_size >> 2) - 1;
return qla81xx_fac_erase_sector(vha, flash_data_addr(ha,
start), flash_data_addr(ha, finish));
}
return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
(fdata & 0xff00) | ((fdata << 16) & 0xff0000) |
((fdata >> 16) & 0xff));
}
static int
qla24xx_write_flash_data(scsi_qla_host_t *vha, __le32 *dwptr, uint32_t faddr,
uint32_t dwords)
{
int ret;
ulong liter;
ulong dburst = OPTROM_BURST_DWORDS; /* burst size in dwords */
uint32_t sec_mask, rest_addr, fdata;
dma_addr_t optrom_dma;
void *optrom = NULL;
struct qla_hw_data *ha = vha->hw;
if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
goto next;
/* Allocate dma buffer for burst write */
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
ql_log(ql_log_warn, vha, 0x7095,
"Failed allocate burst (%x bytes)\n", OPTROM_BURST_SIZE);
}
next:
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Unprotect flash...\n");
ret = qla24xx_unprotect_flash(vha);
if (ret) {
ql_log(ql_log_warn, vha, 0x7096,
"Failed to unprotect flash.\n");
goto done;
}
rest_addr = (ha->fdt_block_size >> 2) - 1;
sec_mask = ~rest_addr;
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
fdata = (faddr & sec_mask) << 2;
/* Are we at the beginning of a sector? */
if (!(faddr & rest_addr)) {
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Erase sector %#x...\n", faddr);
ret = qla24xx_erase_sector(vha, fdata);
if (ret) {
ql_dbg(ql_dbg_user, vha, 0x7007,
"Failed to erase sector %x.\n", faddr);
break;
}
}
if (optrom) {
/* If smaller than a burst remaining */
if (dwords - liter < dburst)
dburst = dwords - liter;
/* Copy to dma buffer */
memcpy(optrom, dwptr, dburst << 2);
/* Burst write */
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Write burst (%#lx dwords)...\n", dburst);
ret = qla2x00_load_ram(vha, optrom_dma,
flash_data_addr(ha, faddr), dburst);
if (!ret) {
liter += dburst - 1;
faddr += dburst - 1;
dwptr += dburst - 1;
continue;
}
ql_log(ql_log_warn, vha, 0x7097,
"Failed burst-write at %x (%p/%#llx)....\n",
flash_data_addr(ha, faddr), optrom,
(u64)optrom_dma);
dma_free_coherent(&ha->pdev->dev,
OPTROM_BURST_SIZE, optrom, optrom_dma);
optrom = NULL;
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
break;
ql_log(ql_log_warn, vha, 0x7098,
"Reverting to slow write...\n");
}
/* Slow write */
ret = qla24xx_write_flash_dword(ha,
flash_data_addr(ha, faddr), le32_to_cpu(*dwptr));
if (ret) {
ql_dbg(ql_dbg_user, vha, 0x7006,
"Failed slow write %x (%x)\n", faddr, *dwptr);
break;
}
}
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Protect flash...\n");
ret = qla24xx_protect_flash(vha);
if (ret)
ql_log(ql_log_warn, vha, 0x7099,
"Failed to protect flash\n");
done:
if (optrom)
dma_free_coherent(&ha->pdev->dev,
OPTROM_BURST_SIZE, optrom, optrom_dma);
return ret;
}
uint8_t *
qla2x00_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
uint32_t bytes)
{
uint32_t i;
__le16 *wptr;
struct qla_hw_data *ha = vha->hw;
/* Word reads to NVRAM via registers. */
wptr = buf;
qla2x00_lock_nvram_access(ha);
for (i = 0; i < bytes >> 1; i++, naddr++)
wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
naddr));
qla2x00_unlock_nvram_access(ha);
return buf;
}
uint8_t *
qla24xx_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
uint32_t bytes)
{
struct qla_hw_data *ha = vha->hw;
uint32_t *dwptr = buf;
uint32_t i;
if (IS_P3P_TYPE(ha))
return buf;
/* Dword reads to flash. */
naddr = nvram_data_addr(ha, naddr);
bytes >>= 2;
for (i = 0; i < bytes; i++, naddr++, dwptr++) {
if (qla24xx_read_flash_dword(ha, naddr, dwptr))
break;
cpu_to_le32s(dwptr);
}
return buf;
}
int
qla2x00_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
uint32_t bytes)
{
int ret, stat;
uint32_t i;
uint16_t *wptr;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
ret = QLA_SUCCESS;
spin_lock_irqsave(&ha->hardware_lock, flags);
qla2x00_lock_nvram_access(ha);
/* Disable NVRAM write-protection. */
stat = qla2x00_clear_nvram_protection(ha);
wptr = (uint16_t *)buf;
for (i = 0; i < bytes >> 1; i++, naddr++) {
qla2x00_write_nvram_word(ha, naddr,
cpu_to_le16(*wptr));
wptr++;
}
/* Enable NVRAM write-protection. */
qla2x00_set_nvram_protection(ha, stat);
qla2x00_unlock_nvram_access(ha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return ret;
}
int
qla24xx_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
uint32_t bytes)
{
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
__le32 *dwptr = buf;
uint32_t i;
int ret;
ret = QLA_SUCCESS;
if (IS_P3P_TYPE(ha))
return ret;
/* Enable flash write. */
wrt_reg_dword(&reg->ctrl_status,
rd_reg_dword(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
rd_reg_dword(&reg->ctrl_status); /* PCI Posting. */
/* Disable NVRAM write-protection. */
qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
/* Dword writes to flash. */
naddr = nvram_data_addr(ha, naddr);
bytes >>= 2;
for (i = 0; i < bytes; i++, naddr++, dwptr++) {
if (qla24xx_write_flash_dword(ha, naddr, le32_to_cpu(*dwptr))) {
ql_dbg(ql_dbg_user, vha, 0x709a,
"Unable to program nvram address=%x data=%x.\n",
naddr, *dwptr);
break;
}
}
/* Enable NVRAM write-protection. */
qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0x8c);
/* Disable flash write. */
wrt_reg_dword(&reg->ctrl_status,
rd_reg_dword(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
rd_reg_dword(&reg->ctrl_status); /* PCI Posting. */
return ret;
}
uint8_t *
qla25xx_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
uint32_t bytes)
{
struct qla_hw_data *ha = vha->hw;
uint32_t *dwptr = buf;
uint32_t i;
/* Dword reads to flash. */
naddr = flash_data_addr(ha, ha->flt_region_vpd_nvram | naddr);
bytes >>= 2;
for (i = 0; i < bytes; i++, naddr++, dwptr++) {
if (qla24xx_read_flash_dword(ha, naddr, dwptr))
break;
cpu_to_le32s(dwptr);
}
return buf;
}
#define RMW_BUFFER_SIZE (64 * 1024)
int
qla25xx_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
uint32_t bytes)
{
struct qla_hw_data *ha = vha->hw;
uint8_t *dbuf = vmalloc(RMW_BUFFER_SIZE);
if (!dbuf)
return QLA_MEMORY_ALLOC_FAILED;
ha->isp_ops->read_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
RMW_BUFFER_SIZE);
memcpy(dbuf + (naddr << 2), buf, bytes);
ha->isp_ops->write_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
RMW_BUFFER_SIZE);
vfree(dbuf);
return QLA_SUCCESS;
}
static inline void
qla2x00_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
{
if (IS_QLA2322(ha)) {
/* Flip all colors. */
if (ha->beacon_color_state == QLA_LED_ALL_ON) {
/* Turn off. */
ha->beacon_color_state = 0;
*pflags = GPIO_LED_ALL_OFF;
} else {
/* Turn on. */
ha->beacon_color_state = QLA_LED_ALL_ON;
*pflags = GPIO_LED_RGA_ON;
}
} else {
/* Flip green led only. */
if (ha->beacon_color_state == QLA_LED_GRN_ON) {
/* Turn off. */
ha->beacon_color_state = 0;
*pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
} else {
/* Turn on. */
ha->beacon_color_state = QLA_LED_GRN_ON;
*pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
}
}
}
#define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r))
void
qla2x00_beacon_blink(struct scsi_qla_host *vha)
{
uint16_t gpio_enable;
uint16_t gpio_data;
uint16_t led_color = 0;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
if (IS_P3P_TYPE(ha))
return;
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Save the Original GPIOE. */
if (ha->pio_address) {
gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
} else {
gpio_enable = rd_reg_word(&reg->gpioe);
gpio_data = rd_reg_word(&reg->gpiod);
}
/* Set the modified gpio_enable values */
gpio_enable |= GPIO_LED_MASK;
if (ha->pio_address) {
WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
} else {
wrt_reg_word(&reg->gpioe, gpio_enable);
rd_reg_word(&reg->gpioe);
}
qla2x00_flip_colors(ha, &led_color);
/* Clear out any previously set LED color. */
gpio_data &= ~GPIO_LED_MASK;
/* Set the new input LED color to GPIOD. */
gpio_data |= led_color;
/* Set the modified gpio_data values */
if (ha->pio_address) {
WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
} else {
wrt_reg_word(&reg->gpiod, gpio_data);
rd_reg_word(&reg->gpiod);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
int
qla2x00_beacon_on(struct scsi_qla_host *vha)
{
uint16_t gpio_enable;
uint16_t gpio_data;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x709b,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
/* Turn off LEDs. */
spin_lock_irqsave(&ha->hardware_lock, flags);
if (ha->pio_address) {
gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
} else {
gpio_enable = rd_reg_word(&reg->gpioe);
gpio_data = rd_reg_word(&reg->gpiod);
}
gpio_enable |= GPIO_LED_MASK;
/* Set the modified gpio_enable values. */
if (ha->pio_address) {
WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
} else {
wrt_reg_word(&reg->gpioe, gpio_enable);
rd_reg_word(&reg->gpioe);
}
/* Clear out previously set LED colour. */
gpio_data &= ~GPIO_LED_MASK;
if (ha->pio_address) {
WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
} else {
wrt_reg_word(&reg->gpiod, gpio_data);
rd_reg_word(&reg->gpiod);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/*
* Let the per HBA timer kick off the blinking process based on
* the following flags. No need to do anything else now.
*/
ha->beacon_blink_led = 1;
ha->beacon_color_state = 0;
return QLA_SUCCESS;
}
int
qla2x00_beacon_off(struct scsi_qla_host *vha)
{
int rval = QLA_SUCCESS;
struct qla_hw_data *ha = vha->hw;
ha->beacon_blink_led = 0;
/* Set the on flag so when it gets flipped it will be off. */
if (IS_QLA2322(ha))
ha->beacon_color_state = QLA_LED_ALL_ON;
else
ha->beacon_color_state = QLA_LED_GRN_ON;
ha->isp_ops->beacon_blink(vha); /* This turns green LED off */
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
rval = qla2x00_set_fw_options(vha, ha->fw_options);
if (rval != QLA_SUCCESS)
ql_log(ql_log_warn, vha, 0x709c,
"Unable to update fw options (beacon off).\n");
return rval;
}
static inline void
qla24xx_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
{
/* Flip all colors. */
if (ha->beacon_color_state == QLA_LED_ALL_ON) {
/* Turn off. */
ha->beacon_color_state = 0;
*pflags = 0;
} else {
/* Turn on. */
ha->beacon_color_state = QLA_LED_ALL_ON;
*pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
}
}
void
qla24xx_beacon_blink(struct scsi_qla_host *vha)
{
uint16_t led_color = 0;
uint32_t gpio_data;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
/* Save the Original GPIOD. */
spin_lock_irqsave(&ha->hardware_lock, flags);
gpio_data = rd_reg_dword(&reg->gpiod);
/* Enable the gpio_data reg for update. */
gpio_data |= GPDX_LED_UPDATE_MASK;
wrt_reg_dword(&reg->gpiod, gpio_data);
gpio_data = rd_reg_dword(&reg->gpiod);
/* Set the color bits. */
qla24xx_flip_colors(ha, &led_color);
/* Clear out any previously set LED color. */
gpio_data &= ~GPDX_LED_COLOR_MASK;
/* Set the new input LED color to GPIOD. */
gpio_data |= led_color;
/* Set the modified gpio_data values. */
wrt_reg_dword(&reg->gpiod, gpio_data);
gpio_data = rd_reg_dword(&reg->gpiod);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static uint32_t
qla83xx_select_led_port(struct qla_hw_data *ha)
{
uint32_t led_select_value = 0;
if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
goto out;
if (ha->port_no == 0)
led_select_value = QLA83XX_LED_PORT0;
else
led_select_value = QLA83XX_LED_PORT1;
out:
return led_select_value;
}
void
qla83xx_beacon_blink(struct scsi_qla_host *vha)
{
uint32_t led_select_value;
struct qla_hw_data *ha = vha->hw;
uint16_t led_cfg[6];
uint16_t orig_led_cfg[6];
uint32_t led_10_value, led_43_value;
if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha) && !IS_QLA27XX(ha) &&
!IS_QLA28XX(ha))
return;
if (!ha->beacon_blink_led)
return;
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
qla2x00_write_ram_word(vha, 0x1003, 0x40000230);
qla2x00_write_ram_word(vha, 0x1004, 0x40000230);
} else if (IS_QLA2031(ha)) {
led_select_value = qla83xx_select_led_port(ha);
qla83xx_wr_reg(vha, led_select_value, 0x40000230);
qla83xx_wr_reg(vha, led_select_value + 4, 0x40000230);
} else if (IS_QLA8031(ha)) {
led_select_value = qla83xx_select_led_port(ha);
qla83xx_rd_reg(vha, led_select_value, &led_10_value);
qla83xx_rd_reg(vha, led_select_value + 0x10, &led_43_value);
qla83xx_wr_reg(vha, led_select_value, 0x01f44000);
msleep(500);
qla83xx_wr_reg(vha, led_select_value, 0x400001f4);
msleep(1000);
qla83xx_wr_reg(vha, led_select_value, led_10_value);
qla83xx_wr_reg(vha, led_select_value + 0x10, led_43_value);
} else if (IS_QLA81XX(ha)) {
int rval;
/* Save Current */
rval = qla81xx_get_led_config(vha, orig_led_cfg);
/* Do the blink */
if (rval == QLA_SUCCESS) {
if (IS_QLA81XX(ha)) {
led_cfg[0] = 0x4000;
led_cfg[1] = 0x2000;
led_cfg[2] = 0;
led_cfg[3] = 0;
led_cfg[4] = 0;
led_cfg[5] = 0;
} else {
led_cfg[0] = 0x4000;
led_cfg[1] = 0x4000;
led_cfg[2] = 0x4000;
led_cfg[3] = 0x2000;
led_cfg[4] = 0;
led_cfg[5] = 0x2000;
}
rval = qla81xx_set_led_config(vha, led_cfg);
msleep(1000);
if (IS_QLA81XX(ha)) {
led_cfg[0] = 0x4000;
led_cfg[1] = 0x2000;
led_cfg[2] = 0;
} else {
led_cfg[0] = 0x4000;
led_cfg[1] = 0x2000;
led_cfg[2] = 0x4000;
led_cfg[3] = 0x4000;
led_cfg[4] = 0;
led_cfg[5] = 0x2000;
}
rval = qla81xx_set_led_config(vha, led_cfg);
}
/* On exit, restore original (presumes no status change) */
qla81xx_set_led_config(vha, orig_led_cfg);
}
}
int
qla24xx_beacon_on(struct scsi_qla_host *vha)
{
uint32_t gpio_data;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
if (IS_P3P_TYPE(ha))
return QLA_SUCCESS;
if (IS_QLA8031(ha) || IS_QLA81XX(ha))
goto skip_gpio; /* let blink handle it */
if (ha->beacon_blink_led == 0) {
/* Enable firmware for update */
ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS)
return QLA_FUNCTION_FAILED;
if (qla2x00_get_fw_options(vha, ha->fw_options) !=
QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7009,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
if (IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
goto skip_gpio;
spin_lock_irqsave(&ha->hardware_lock, flags);
gpio_data = rd_reg_dword(&reg->gpiod);
/* Enable the gpio_data reg for update. */
gpio_data |= GPDX_LED_UPDATE_MASK;
wrt_reg_dword(&reg->gpiod, gpio_data);
rd_reg_dword(&reg->gpiod);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
/* So all colors blink together. */
ha->beacon_color_state = 0;
skip_gpio:
/* Let the per HBA timer kick off the blinking process. */
ha->beacon_blink_led = 1;
return QLA_SUCCESS;
}
int
qla24xx_beacon_off(struct scsi_qla_host *vha)
{
uint32_t gpio_data;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
if (IS_P3P_TYPE(ha))
return QLA_SUCCESS;
if (!ha->flags.fw_started)
return QLA_SUCCESS;
ha->beacon_blink_led = 0;
if (IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
goto set_fw_options;
if (IS_QLA8031(ha) || IS_QLA81XX(ha))
return QLA_SUCCESS;
ha->beacon_color_state = QLA_LED_ALL_ON;
ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */
/* Give control back to firmware. */
spin_lock_irqsave(&ha->hardware_lock, flags);
gpio_data = rd_reg_dword(&reg->gpiod);
/* Disable the gpio_data reg for update. */
gpio_data &= ~GPDX_LED_UPDATE_MASK;
wrt_reg_dword(&reg->gpiod, gpio_data);
rd_reg_dword(&reg->gpiod);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
set_fw_options:
ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x704d,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x704e,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
return QLA_SUCCESS;
}
/*
* Flash support routines
*/
/**
* qla2x00_flash_enable() - Setup flash for reading and writing.
* @ha: HA context
*/
static void
qla2x00_flash_enable(struct qla_hw_data *ha)
{
uint16_t data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
data = rd_reg_word(&reg->ctrl_status);
data |= CSR_FLASH_ENABLE;
wrt_reg_word(&reg->ctrl_status, data);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
}
/**
* qla2x00_flash_disable() - Disable flash and allow RISC to run.
* @ha: HA context
*/
static void
qla2x00_flash_disable(struct qla_hw_data *ha)
{
uint16_t data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
data = rd_reg_word(&reg->ctrl_status);
data &= ~(CSR_FLASH_ENABLE);
wrt_reg_word(&reg->ctrl_status, data);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
}
/**
* qla2x00_read_flash_byte() - Reads a byte from flash
* @ha: HA context
* @addr: Address in flash to read
*
* A word is read from the chip, but, only the lower byte is valid.
*
* Returns the byte read from flash @addr.
*/
static uint8_t
qla2x00_read_flash_byte(struct qla_hw_data *ha, uint32_t addr)
{
uint16_t data;
uint16_t bank_select;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
bank_select = rd_reg_word(&reg->ctrl_status);
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
/* Specify 64K address range: */
/* clear out Module Select and Flash Address bits [19:16]. */
bank_select &= ~0xf8;
bank_select |= addr >> 12 & 0xf0;
bank_select |= CSR_FLASH_64K_BANK;
wrt_reg_word(&reg->ctrl_status, bank_select);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
wrt_reg_word(&reg->flash_address, (uint16_t)addr);
data = rd_reg_word(&reg->flash_data);
return (uint8_t)data;
}
/* Setup bit 16 of flash address. */
if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
bank_select |= CSR_FLASH_64K_BANK;
wrt_reg_word(&reg->ctrl_status, bank_select);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
} else if (((addr & BIT_16) == 0) &&
(bank_select & CSR_FLASH_64K_BANK)) {
bank_select &= ~(CSR_FLASH_64K_BANK);
wrt_reg_word(&reg->ctrl_status, bank_select);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
}
/* Always perform IO mapped accesses to the FLASH registers. */
if (ha->pio_address) {
uint16_t data2;
WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
do {
data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
barrier();
cpu_relax();
data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
} while (data != data2);
} else {
wrt_reg_word(&reg->flash_address, (uint16_t)addr);
data = qla2x00_debounce_register(&reg->flash_data);
}
return (uint8_t)data;
}
/**
* qla2x00_write_flash_byte() - Write a byte to flash
* @ha: HA context
* @addr: Address in flash to write
* @data: Data to write
*/
static void
qla2x00_write_flash_byte(struct qla_hw_data *ha, uint32_t addr, uint8_t data)
{
uint16_t bank_select;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
bank_select = rd_reg_word(&reg->ctrl_status);
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
/* Specify 64K address range: */
/* clear out Module Select and Flash Address bits [19:16]. */
bank_select &= ~0xf8;
bank_select |= addr >> 12 & 0xf0;
bank_select |= CSR_FLASH_64K_BANK;
wrt_reg_word(&reg->ctrl_status, bank_select);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
wrt_reg_word(&reg->flash_address, (uint16_t)addr);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
wrt_reg_word(&reg->flash_data, (uint16_t)data);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
return;
}
/* Setup bit 16 of flash address. */
if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
bank_select |= CSR_FLASH_64K_BANK;
wrt_reg_word(&reg->ctrl_status, bank_select);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
} else if (((addr & BIT_16) == 0) &&
(bank_select & CSR_FLASH_64K_BANK)) {
bank_select &= ~(CSR_FLASH_64K_BANK);
wrt_reg_word(&reg->ctrl_status, bank_select);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
}
/* Always perform IO mapped accesses to the FLASH registers. */
if (ha->pio_address) {
WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data);
} else {
wrt_reg_word(&reg->flash_address, (uint16_t)addr);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
wrt_reg_word(&reg->flash_data, (uint16_t)data);
rd_reg_word(&reg->ctrl_status); /* PCI Posting. */
}
}
/**
* qla2x00_poll_flash() - Polls flash for completion.
* @ha: HA context
* @addr: Address in flash to poll
* @poll_data: Data to be polled
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*
* This function polls the device until bit 7 of what is read matches data
* bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed
* out (a fatal error). The flash book recommeds reading bit 7 again after
* reading bit 5 as a 1.
*
* Returns 0 on success, else non-zero.
*/
static int
qla2x00_poll_flash(struct qla_hw_data *ha, uint32_t addr, uint8_t poll_data,
uint8_t man_id, uint8_t flash_id)
{
int status;
uint8_t flash_data;
uint32_t cnt;
status = 1;
/* Wait for 30 seconds for command to finish. */
poll_data &= BIT_7;
for (cnt = 3000000; cnt; cnt--) {
flash_data = qla2x00_read_flash_byte(ha, addr);
if ((flash_data & BIT_7) == poll_data) {
status = 0;
break;
}
if (man_id != 0x40 && man_id != 0xda) {
if ((flash_data & BIT_5) && cnt > 2)
cnt = 2;
}
udelay(10);
barrier();
cond_resched();
}
return status;
}
/**
* qla2x00_program_flash_address() - Programs a flash address
* @ha: HA context
* @addr: Address in flash to program
* @data: Data to be written in flash
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*
* Returns 0 on success, else non-zero.
*/
static int
qla2x00_program_flash_address(struct qla_hw_data *ha, uint32_t addr,
uint8_t data, uint8_t man_id, uint8_t flash_id)
{
/* Write Program Command Sequence. */
if (IS_OEM_001(ha)) {
qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
qla2x00_write_flash_byte(ha, 0x555, 0x55);
qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
qla2x00_write_flash_byte(ha, addr, data);
} else {
if (man_id == 0xda && flash_id == 0xc1) {
qla2x00_write_flash_byte(ha, addr, data);
if (addr & 0x7e)
return 0;
} else {
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
qla2x00_write_flash_byte(ha, addr, data);
}
}
udelay(150);
/* Wait for write to complete. */
return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
}
/**
* qla2x00_erase_flash() - Erase the flash.
* @ha: HA context
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*
* Returns 0 on success, else non-zero.
*/
static int
qla2x00_erase_flash(struct qla_hw_data *ha, uint8_t man_id, uint8_t flash_id)
{
/* Individual Sector Erase Command Sequence */
if (IS_OEM_001(ha)) {
qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
qla2x00_write_flash_byte(ha, 0x555, 0x55);
qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
qla2x00_write_flash_byte(ha, 0x555, 0x55);
qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
} else {
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
qla2x00_write_flash_byte(ha, 0x5555, 0x80);
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
qla2x00_write_flash_byte(ha, 0x5555, 0x10);
}
udelay(150);
/* Wait for erase to complete. */
return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
}
/**
* qla2x00_erase_flash_sector() - Erase a flash sector.
* @ha: HA context
* @addr: Flash sector to erase
* @sec_mask: Sector address mask
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*
* Returns 0 on success, else non-zero.
*/
static int
qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
{
/* Individual Sector Erase Command Sequence */
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
qla2x00_write_flash_byte(ha, 0x5555, 0x80);
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
if (man_id == 0x1f && flash_id == 0x13)
qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
else
qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
udelay(150);
/* Wait for erase to complete. */
return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
}
/**
* qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
* @ha: host adapter
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*/
static void
qla2x00_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
uint8_t *flash_id)
{
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
qla2x00_write_flash_byte(ha, 0x5555, 0x90);
*man_id = qla2x00_read_flash_byte(ha, 0x0000);
*flash_id = qla2x00_read_flash_byte(ha, 0x0001);
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
}
static void
qla2x00_read_flash_data(struct qla_hw_data *ha, uint8_t *tmp_buf,
uint32_t saddr, uint32_t length)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t midpoint, ilength;
uint8_t data;
midpoint = length / 2;
wrt_reg_word(&reg->nvram, 0);
rd_reg_word(&reg->nvram);
for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
if (ilength == midpoint) {
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram);
}
data = qla2x00_read_flash_byte(ha, saddr);
if (saddr % 100)
udelay(10);
*tmp_buf = data;
cond_resched();
}
}
static inline void
qla2x00_suspend_hba(struct scsi_qla_host *vha)
{
int cnt;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Suspend HBA. */
scsi_block_requests(vha->host);
ha->isp_ops->disable_intrs(ha);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Pause RISC. */
spin_lock_irqsave(&ha->hardware_lock, flags);
wrt_reg_word(&reg->hccr, HCCR_PAUSE_RISC);
rd_reg_word(&reg->hccr);
if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
for (cnt = 0; cnt < 30000; cnt++) {
if ((rd_reg_word(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
break;
udelay(100);
}
} else {
udelay(10);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static inline void
qla2x00_resume_hba(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
/* Resume HBA. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_chip_reset(vha);
scsi_unblock_requests(vha->host);
}
void *
qla2x00_read_optrom_data(struct scsi_qla_host *vha, void *buf,
uint32_t offset, uint32_t length)
{
uint32_t addr, midpoint;
uint8_t *data;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Suspend HBA. */
qla2x00_suspend_hba(vha);
/* Go with read. */
midpoint = ha->optrom_size / 2;
qla2x00_flash_enable(ha);
wrt_reg_word(&reg->nvram, 0);
rd_reg_word(&reg->nvram); /* PCI Posting. */
for (addr = offset, data = buf; addr < length; addr++, data++) {
if (addr == midpoint) {
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram); /* PCI Posting. */
}
*data = qla2x00_read_flash_byte(ha, addr);
}
qla2x00_flash_disable(ha);
/* Resume HBA. */
qla2x00_resume_hba(vha);
return buf;
}
int
qla2x00_write_optrom_data(struct scsi_qla_host *vha, void *buf,
uint32_t offset, uint32_t length)
{
int rval;
uint8_t man_id, flash_id, sec_number, *data;
uint16_t wd;
uint32_t addr, liter, sec_mask, rest_addr;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Suspend HBA. */
qla2x00_suspend_hba(vha);
rval = QLA_SUCCESS;
sec_number = 0;
/* Reset ISP chip. */
wrt_reg_word(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
/* Go with write. */
qla2x00_flash_enable(ha);
do { /* Loop once to provide quick error exit */
/* Structure of flash memory based on manufacturer */
if (IS_OEM_001(ha)) {
/* OEM variant with special flash part. */
man_id = flash_id = 0;
rest_addr = 0xffff;
sec_mask = 0x10000;
goto update_flash;
}
qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
switch (man_id) {
case 0x20: /* ST flash. */
if (flash_id == 0xd2 || flash_id == 0xe3) {
/*
* ST m29w008at part - 64kb sector size with
* 32kb,8kb,8kb,16kb sectors at memory address
* 0xf0000.
*/
rest_addr = 0xffff;
sec_mask = 0x10000;
break;
}
/*
* ST m29w010b part - 16kb sector size
* Default to 16kb sectors
*/
rest_addr = 0x3fff;
sec_mask = 0x1c000;
break;
case 0x40: /* Mostel flash. */
/* Mostel v29c51001 part - 512 byte sector size. */
rest_addr = 0x1ff;
sec_mask = 0x1fe00;
break;
case 0xbf: /* SST flash. */
/* SST39sf10 part - 4kb sector size. */
rest_addr = 0xfff;
sec_mask = 0x1f000;
break;
case 0xda: /* Winbond flash. */
/* Winbond W29EE011 part - 256 byte sector size. */
rest_addr = 0x7f;
sec_mask = 0x1ff80;
break;
case 0xc2: /* Macronix flash. */
/* 64k sector size. */
if (flash_id == 0x38 || flash_id == 0x4f) {
rest_addr = 0xffff;
sec_mask = 0x10000;
break;
}
fallthrough;
case 0x1f: /* Atmel flash. */
/* 512k sector size. */
if (flash_id == 0x13) {
rest_addr = 0x7fffffff;
sec_mask = 0x80000000;
break;
}
fallthrough;
case 0x01: /* AMD flash. */
if (flash_id == 0x38 || flash_id == 0x40 ||
flash_id == 0x4f) {
/* Am29LV081 part - 64kb sector size. */
/* Am29LV002BT part - 64kb sector size. */
rest_addr = 0xffff;
sec_mask = 0x10000;
break;
} else if (flash_id == 0x3e) {
/*
* Am29LV008b part - 64kb sector size with
* 32kb,8kb,8kb,16kb sector at memory address
* h0xf0000.
*/
rest_addr = 0xffff;
sec_mask = 0x10000;
break;
} else if (flash_id == 0x20 || flash_id == 0x6e) {
/*
* Am29LV010 part or AM29f010 - 16kb sector
* size.
*/
rest_addr = 0x3fff;
sec_mask = 0x1c000;
break;
} else if (flash_id == 0x6d) {
/* Am29LV001 part - 8kb sector size. */
rest_addr = 0x1fff;
sec_mask = 0x1e000;
break;
}
fallthrough;
default:
/* Default to 16 kb sector size. */
rest_addr = 0x3fff;
sec_mask = 0x1c000;
break;
}
update_flash:
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
if (qla2x00_erase_flash(ha, man_id, flash_id)) {
rval = QLA_FUNCTION_FAILED;
break;
}
}
for (addr = offset, liter = 0; liter < length; liter++,
addr++) {
data = buf + liter;
/* Are we at the beginning of a sector? */
if ((addr & rest_addr) == 0) {
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
if (addr >= 0x10000UL) {
if (((addr >> 12) & 0xf0) &&
((man_id == 0x01 &&
flash_id == 0x3e) ||
(man_id == 0x20 &&
flash_id == 0xd2))) {
sec_number++;
if (sec_number == 1) {
rest_addr =
0x7fff;
sec_mask =
0x18000;
} else if (
sec_number == 2 ||
sec_number == 3) {
rest_addr =
0x1fff;
sec_mask =
0x1e000;
} else if (
sec_number == 4) {
rest_addr =
0x3fff;
sec_mask =
0x1c000;
}
}
}
} else if (addr == ha->optrom_size / 2) {
wrt_reg_word(&reg->nvram, NVR_SELECT);
rd_reg_word(&reg->nvram);
}
if (flash_id == 0xda && man_id == 0xc1) {
qla2x00_write_flash_byte(ha, 0x5555,
0xaa);
qla2x00_write_flash_byte(ha, 0x2aaa,
0x55);
qla2x00_write_flash_byte(ha, 0x5555,
0xa0);
} else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
/* Then erase it */
if (qla2x00_erase_flash_sector(ha,
addr, sec_mask, man_id,
flash_id)) {
rval = QLA_FUNCTION_FAILED;
break;
}
if (man_id == 0x01 && flash_id == 0x6d)
sec_number++;
}
}
if (man_id == 0x01 && flash_id == 0x6d) {
if (sec_number == 1 &&
addr == (rest_addr - 1)) {
rest_addr = 0x0fff;
sec_mask = 0x1f000;
} else if (sec_number == 3 && (addr & 0x7ffe)) {
rest_addr = 0x3fff;
sec_mask = 0x1c000;
}
}
if (qla2x00_program_flash_address(ha, addr, *data,
man_id, flash_id)) {
rval = QLA_FUNCTION_FAILED;
break;
}
cond_resched();
}
} while (0);
qla2x00_flash_disable(ha);
/* Resume HBA. */
qla2x00_resume_hba(vha);
return rval;
}
void *
qla24xx_read_optrom_data(struct scsi_qla_host *vha, void *buf,
uint32_t offset, uint32_t length)
{
struct qla_hw_data *ha = vha->hw;
int rc;
/* Suspend HBA. */
scsi_block_requests(vha->host);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Go with read. */
rc = qla24xx_read_flash_data(vha, buf, offset >> 2, length >> 2);
if (rc) {
ql_log(ql_log_info, vha, 0x01a0,
"Unable to perform optrom read(%x).\n", rc);
}
/* Resume HBA. */
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
scsi_unblock_requests(vha->host);
return buf;
}
static int
qla28xx_extract_sfub_and_verify(struct scsi_qla_host *vha, __le32 *buf,
uint32_t len, uint32_t buf_size_without_sfub, uint8_t *sfub_buf)
{
uint32_t check_sum = 0;
__le32 *p;
int i;
p = buf + buf_size_without_sfub;
/* Extract SFUB from end of file */
memcpy(sfub_buf, (uint8_t *)p,
sizeof(struct secure_flash_update_block));
for (i = 0; i < (sizeof(struct secure_flash_update_block) >> 2); i++)
check_sum += le32_to_cpu(p[i]);
check_sum = (~check_sum) + 1;
if (check_sum != le32_to_cpu(p[i])) {
ql_log(ql_log_warn, vha, 0x7097,
"SFUB checksum failed, 0x%x, 0x%x\n",
check_sum, le32_to_cpu(p[i]));
return QLA_COMMAND_ERROR;
}
return QLA_SUCCESS;
}
static int
qla28xx_get_flash_region(struct scsi_qla_host *vha, uint32_t start,
struct qla_flt_region *region)
{
struct qla_hw_data *ha = vha->hw;
struct qla_flt_header *flt = ha->flt;
struct qla_flt_region *flt_reg = &flt->region[0];
uint16_t cnt;
int rval = QLA_FUNCTION_FAILED;
if (!ha->flt)
return QLA_FUNCTION_FAILED;
cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
for (; cnt; cnt--, flt_reg++) {
if (le32_to_cpu(flt_reg->start) == start) {
memcpy((uint8_t *)region, flt_reg,
sizeof(struct qla_flt_region));
rval = QLA_SUCCESS;
break;
}
}
return rval;
}
static int
qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
uint32_t dwords)
{
struct qla_hw_data *ha = vha->hw;
ulong liter;
ulong dburst = OPTROM_BURST_DWORDS; /* burst size in dwords */
uint32_t sec_mask, rest_addr, fdata;
void *optrom = NULL;
dma_addr_t optrom_dma;
int rval, ret;
struct secure_flash_update_block *sfub;
dma_addr_t sfub_dma;
uint32_t offset = faddr << 2;
uint32_t buf_size_without_sfub = 0;
struct qla_flt_region region;
bool reset_to_rom = false;
uint32_t risc_size, risc_attr = 0;
__be32 *fw_array = NULL;
/* Retrieve region info - must be a start address passed in */
rval = qla28xx_get_flash_region(vha, offset, &region);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xffff,
"Invalid address %x - not a region start address\n",
offset);
goto done;
}
/* Allocate dma buffer for burst write */
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
ql_log(ql_log_warn, vha, 0x7095,
"Failed allocate burst (%x bytes)\n", OPTROM_BURST_SIZE);
rval = QLA_COMMAND_ERROR;
goto done;
}
/*
* If adapter supports secure flash and region is secure
* extract secure flash update block (SFUB) and verify
*/
if (ha->flags.secure_adapter && region.attribute) {
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"Region %x is secure\n", le16_to_cpu(region.code));
switch (le16_to_cpu(region.code)) {
case FLT_REG_FW:
case FLT_REG_FW_SEC_27XX:
case FLT_REG_MPI_PRI_28XX:
case FLT_REG_MPI_SEC_28XX:
fw_array = (__force __be32 *)dwptr;
/* 1st fw array */
risc_size = be32_to_cpu(fw_array[3]);
risc_attr = be32_to_cpu(fw_array[9]);
buf_size_without_sfub = risc_size;
fw_array += risc_size;
/* 2nd fw array */
risc_size = be32_to_cpu(fw_array[3]);
buf_size_without_sfub += risc_size;
fw_array += risc_size;
/* 1st dump template */
risc_size = be32_to_cpu(fw_array[2]);
/* skip header and ignore checksum */
buf_size_without_sfub += risc_size;
fw_array += risc_size;
if (risc_attr & BIT_9) {
/* 2nd dump template */
risc_size = be32_to_cpu(fw_array[2]);
/* skip header and ignore checksum */
buf_size_without_sfub += risc_size;
fw_array += risc_size;
}
break;
case FLT_REG_PEP_PRI_28XX:
case FLT_REG_PEP_SEC_28XX:
fw_array = (__force __be32 *)dwptr;
/* 1st fw array */
risc_size = be32_to_cpu(fw_array[3]);
risc_attr = be32_to_cpu(fw_array[9]);
buf_size_without_sfub = risc_size;
fw_array += risc_size;
break;
default:
ql_log(ql_log_warn + ql_dbg_verbose, vha,
0xffff, "Secure region %x not supported\n",
le16_to_cpu(region.code));
rval = QLA_COMMAND_ERROR;
goto done;
}
sfub = dma_alloc_coherent(&ha->pdev->dev,
sizeof(struct secure_flash_update_block), &sfub_dma,
GFP_KERNEL);
if (!sfub) {
ql_log(ql_log_warn, vha, 0xffff,
"Unable to allocate memory for SFUB\n");
rval = QLA_COMMAND_ERROR;
goto done;
}
rval = qla28xx_extract_sfub_and_verify(vha, (__le32 *)dwptr,
dwords, buf_size_without_sfub, (uint8_t *)sfub);
if (rval != QLA_SUCCESS)
goto done;
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"SFUB extract and verify successful\n");
}
rest_addr = (ha->fdt_block_size >> 2) - 1;
sec_mask = ~rest_addr;
/* Lock semaphore */
rval = qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_LOCK);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xffff,
"Unable to lock flash semaphore.");
goto done;
}
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Unprotect flash...\n");
rval = qla24xx_unprotect_flash(vha);
if (rval) {
qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
ql_log(ql_log_warn, vha, 0x7096, "Failed unprotect flash\n");
goto done;
}
for (liter = 0; liter < dwords; liter++, faddr++) {
fdata = (faddr & sec_mask) << 2;
/* If start of sector */
if (!(faddr & rest_addr)) {
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Erase sector %#x...\n", faddr);
rval = qla24xx_erase_sector(vha, fdata);
if (rval) {
ql_dbg(ql_dbg_user, vha, 0x7007,
"Failed erase sector %#x\n", faddr);
goto write_protect;
}
}
}
if (ha->flags.secure_adapter) {
/*
* If adapter supports secure flash but FW doesn't,
* disable write protect, release semaphore and reset
* chip to execute ROM code in order to update region securely
*/
if (!ha->flags.secure_fw) {
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"Disable Write and Release Semaphore.");
rval = qla24xx_protect_flash(vha);
if (rval != QLA_SUCCESS) {
qla81xx_fac_semaphore_access(vha,
FAC_SEMAPHORE_UNLOCK);
ql_log(ql_log_warn, vha, 0xffff,
"Unable to protect flash.");
goto done;
}
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"Reset chip to ROM.");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
set_bit(ISP_ABORT_TO_ROM, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
rval = qla2x00_wait_for_chip_reset(vha);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xffff,
"Unable to reset to ROM code.");
goto done;
}
reset_to_rom = true;
ha->flags.fac_supported = 0;
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"Lock Semaphore");
rval = qla2xxx_write_remote_register(vha,
FLASH_SEMAPHORE_REGISTER_ADDR, 0x00020002);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xffff,
"Unable to lock flash semaphore.");
goto done;
}
/* Unprotect flash */
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"Enable Write.");
rval = qla2x00_write_ram_word(vha, 0x7ffd0101, 0);
if (rval) {
ql_log(ql_log_warn, vha, 0x7096,
"Failed unprotect flash\n");
goto done;
}
}
/* If region is secure, send Secure Flash MB Cmd */
if (region.attribute && buf_size_without_sfub) {
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
"Sending Secure Flash MB Cmd\n");
rval = qla28xx_secure_flash_update(vha, 0,
le16_to_cpu(region.code),
buf_size_without_sfub, sfub_dma,
sizeof(struct secure_flash_update_block) >> 2);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xffff,
"Secure Flash MB Cmd failed %x.", rval);
goto write_protect;
}
}
}
/* re-init flash offset */
faddr = offset >> 2;
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
fdata = (faddr & sec_mask) << 2;
/* If smaller than a burst remaining */
if (dwords - liter < dburst)
dburst = dwords - liter;
/* Copy to dma buffer */
memcpy(optrom, dwptr, dburst << 2);
/* Burst write */
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Write burst (%#lx dwords)...\n", dburst);
rval = qla2x00_load_ram(vha, optrom_dma,
flash_data_addr(ha, faddr), dburst);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7097,
"Failed burst write at %x (%p/%#llx)...\n",
flash_data_addr(ha, faddr), optrom,
(u64)optrom_dma);
break;
}
liter += dburst - 1;
faddr += dburst - 1;
dwptr += dburst - 1;
}
write_protect:
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
"Protect flash...\n");
ret = qla24xx_protect_flash(vha);
if (ret) {
qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
ql_log(ql_log_warn, vha, 0x7099,
"Failed protect flash\n");
rval = QLA_COMMAND_ERROR;
}
if (reset_to_rom == true) {
/* Schedule DPC to restart the RISC */
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
ret = qla2x00_wait_for_hba_online(vha);
if (ret != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0xffff,
"Adapter did not come out of reset\n");
rval = QLA_COMMAND_ERROR;
}
}
done:
if (optrom)
dma_free_coherent(&ha->pdev->dev,
OPTROM_BURST_SIZE, optrom, optrom_dma);
return rval;
}
int
qla24xx_write_optrom_data(struct scsi_qla_host *vha, void *buf,
uint32_t offset, uint32_t length)
{
int rval;
struct qla_hw_data *ha = vha->hw;
/* Suspend HBA. */
scsi_block_requests(vha->host);
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
/* Go with write. */
if (IS_QLA28XX(ha))
rval = qla28xx_write_flash_data(vha, buf, offset >> 2,
length >> 2);
else
rval = qla24xx_write_flash_data(vha, buf, offset >> 2,
length >> 2);
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
scsi_unblock_requests(vha->host);
return rval;
}
void *
qla25xx_read_optrom_data(struct scsi_qla_host *vha, void *buf,
uint32_t offset, uint32_t length)
{
int rval;
dma_addr_t optrom_dma;
void *optrom;
uint8_t *pbuf;
uint32_t faddr, left, burst;
struct qla_hw_data *ha = vha->hw;
if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
IS_QLA27XX(ha) || IS_QLA28XX(ha))
goto try_fast;
if (offset & 0xfff)
goto slow_read;
if (length < OPTROM_BURST_SIZE)
goto slow_read;
try_fast:
if (offset & 0xff)
goto slow_read;
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
ql_log(ql_log_warn, vha, 0x00cc,
"Unable to allocate memory for optrom burst read (%x KB).\n",
OPTROM_BURST_SIZE / 1024);
goto slow_read;
}
pbuf = buf;
faddr = offset >> 2;
left = length >> 2;
burst = OPTROM_BURST_DWORDS;
while (left != 0) {
if (burst > left)
burst = left;
rval = qla2x00_dump_ram(vha, optrom_dma,
flash_data_addr(ha, faddr), burst);
if (rval) {
ql_log(ql_log_warn, vha, 0x00f5,
"Unable to burst-read optrom segment (%x/%x/%llx).\n",
rval, flash_data_addr(ha, faddr),
(unsigned long long)optrom_dma);
ql_log(ql_log_warn, vha, 0x00f6,
"Reverting to slow-read.\n");
dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
optrom, optrom_dma);
goto slow_read;
}
memcpy(pbuf, optrom, burst * 4);
left -= burst;
faddr += burst;
pbuf += burst * 4;
}
dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
optrom_dma);
return buf;
slow_read:
return qla24xx_read_optrom_data(vha, buf, offset, length);
}
/**
* qla2x00_get_fcode_version() - Determine an FCODE image's version.
* @ha: HA context
* @pcids: Pointer to the FCODE PCI data structure
*
* The process of retrieving the FCODE version information is at best
* described as interesting.
*
* Within the first 100h bytes of the image an ASCII string is present
* which contains several pieces of information including the FCODE
* version. Unfortunately it seems the only reliable way to retrieve
* the version is by scanning for another sentinel within the string,
* the FCODE build date:
*
* ... 2.00.02 10/17/02 ...
*
* Returns QLA_SUCCESS on successful retrieval of version.
*/
static void
qla2x00_get_fcode_version(struct qla_hw_data *ha, uint32_t pcids)
{
int ret = QLA_FUNCTION_FAILED;
uint32_t istart, iend, iter, vend;
uint8_t do_next, rbyte, *vbyte;
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
/* Skip the PCI data structure. */
istart = pcids +
((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
qla2x00_read_flash_byte(ha, pcids + 0x0A));
iend = istart + 0x100;
do {
/* Scan for the sentinel date string...eeewww. */
do_next = 0;
iter = istart;
while ((iter < iend) && !do_next) {
iter++;
if (qla2x00_read_flash_byte(ha, iter) == '/') {
if (qla2x00_read_flash_byte(ha, iter + 2) ==
'/')
do_next++;
else if (qla2x00_read_flash_byte(ha,
iter + 3) == '/')
do_next++;
}
}
if (!do_next)
break;
/* Backtrack to previous ' ' (space). */
do_next = 0;
while ((iter > istart) && !do_next) {
iter--;
if (qla2x00_read_flash_byte(ha, iter) == ' ')
do_next++;
}
if (!do_next)
break;
/*
* Mark end of version tag, and find previous ' ' (space) or
* string length (recent FCODE images -- major hack ahead!!!).
*/
vend = iter - 1;
do_next = 0;
while ((iter > istart) && !do_next) {
iter--;
rbyte = qla2x00_read_flash_byte(ha, iter);
if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
do_next++;
}
if (!do_next)
break;
/* Mark beginning of version tag, and copy data. */
iter++;
if ((vend - iter) &&
((vend - iter) < sizeof(ha->fcode_revision))) {
vbyte = ha->fcode_revision;
while (iter <= vend) {
*vbyte++ = qla2x00_read_flash_byte(ha, iter);
iter++;
}
ret = QLA_SUCCESS;
}
} while (0);
if (ret != QLA_SUCCESS)
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
}
int
qla2x00_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
{
int ret = QLA_SUCCESS;
uint8_t code_type, last_image;
uint32_t pcihdr, pcids;
uint8_t *dbyte;
uint16_t *dcode;
struct qla_hw_data *ha = vha->hw;
if (!ha->pio_address || !mbuf)
return QLA_FUNCTION_FAILED;
memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
qla2x00_flash_enable(ha);
/* Begin with first PCI expansion ROM header. */
pcihdr = 0;
last_image = 1;
do {
/* Verify PCI expansion ROM header. */
if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
/* No signature */
ql_log(ql_log_fatal, vha, 0x0050,
"No matching ROM signature.\n");
ret = QLA_FUNCTION_FAILED;
break;
}
/* Locate PCI data structure. */
pcids = pcihdr +
((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
qla2x00_read_flash_byte(ha, pcihdr + 0x18));
/* Validate signature of PCI data structure. */
if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
/* Incorrect header. */
ql_log(ql_log_fatal, vha, 0x0051,
"PCI data struct not found pcir_adr=%x.\n", pcids);
ret = QLA_FUNCTION_FAILED;
break;
}
/* Read version */
code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
switch (code_type) {
case ROM_CODE_TYPE_BIOS:
/* Intel x86, PC-AT compatible. */
ha->bios_revision[0] =
qla2x00_read_flash_byte(ha, pcids + 0x12);
ha->bios_revision[1] =
qla2x00_read_flash_byte(ha, pcids + 0x13);
ql_dbg(ql_dbg_init, vha, 0x0052,
"Read BIOS %d.%d.\n",
ha->bios_revision[1], ha->bios_revision[0]);
break;
case ROM_CODE_TYPE_FCODE:
/* Open Firmware standard for PCI (FCode). */
/* Eeeewww... */
qla2x00_get_fcode_version(ha, pcids);
break;
case ROM_CODE_TYPE_EFI:
/* Extensible Firmware Interface (EFI). */
ha->efi_revision[0] =
qla2x00_read_flash_byte(ha, pcids + 0x12);
ha->efi_revision[1] =
qla2x00_read_flash_byte(ha, pcids + 0x13);
ql_dbg(ql_dbg_init, vha, 0x0053,
"Read EFI %d.%d.\n",
ha->efi_revision[1], ha->efi_revision[0]);
break;
default:
ql_log(ql_log_warn, vha, 0x0054,
"Unrecognized code type %x at pcids %x.\n",
code_type, pcids);
break;
}
last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
/* Locate next PCI expansion ROM. */
pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
} while (!last_image);
if (IS_QLA2322(ha)) {
/* Read firmware image information. */
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
dbyte = mbuf;
memset(dbyte, 0, 8);
dcode = (uint16_t *)dbyte;
qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10,
8);
ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010a,
"Dumping fw "
"ver from flash:.\n");
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010b,
dbyte, 32);
if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
dcode[2] == 0xffff && dcode[3] == 0xffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
ql_log(ql_log_warn, vha, 0x0057,
"Unrecognized fw revision at %x.\n",
ha->flt_region_fw * 4);
} else {
/* values are in big endian */
ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
ql_dbg(ql_dbg_init, vha, 0x0058,
"FW Version: "
"%d.%d.%d.\n", ha->fw_revision[0],
ha->fw_revision[1], ha->fw_revision[2]);
}
}
qla2x00_flash_disable(ha);
return ret;
}
int
qla82xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
{
int ret = QLA_SUCCESS;
uint32_t pcihdr, pcids;
uint32_t *dcode = mbuf;
uint8_t *bcode = mbuf;
uint8_t code_type, last_image;
struct qla_hw_data *ha = vha->hw;
if (!mbuf)
return QLA_FUNCTION_FAILED;
memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
/* Begin with first PCI expansion ROM header. */
pcihdr = ha->flt_region_boot << 2;
last_image = 1;
do {
/* Verify PCI expansion ROM header. */
ha->isp_ops->read_optrom(vha, dcode, pcihdr, 0x20 * 4);
bcode = mbuf + (pcihdr % 4);
if (memcmp(bcode, "\x55\xaa", 2)) {
/* No signature */
ql_log(ql_log_fatal, vha, 0x0154,
"No matching ROM signature.\n");
ret = QLA_FUNCTION_FAILED;
break;
}
/* Locate PCI data structure. */
pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
ha->isp_ops->read_optrom(vha, dcode, pcids, 0x20 * 4);
bcode = mbuf + (pcihdr % 4);
/* Validate signature of PCI data structure. */
if (memcmp(bcode, "PCIR", 4)) {
/* Incorrect header. */
ql_log(ql_log_fatal, vha, 0x0155,
"PCI data struct not found pcir_adr=%x.\n", pcids);
ret = QLA_FUNCTION_FAILED;
break;
}
/* Read version */
code_type = bcode[0x14];
switch (code_type) {
case ROM_CODE_TYPE_BIOS:
/* Intel x86, PC-AT compatible. */
ha->bios_revision[0] = bcode[0x12];
ha->bios_revision[1] = bcode[0x13];
ql_dbg(ql_dbg_init, vha, 0x0156,
"Read BIOS %d.%d.\n",
ha->bios_revision[1], ha->bios_revision[0]);
break;
case ROM_CODE_TYPE_FCODE:
/* Open Firmware standard for PCI (FCode). */
ha->fcode_revision[0] = bcode[0x12];
ha->fcode_revision[1] = bcode[0x13];
ql_dbg(ql_dbg_init, vha, 0x0157,
"Read FCODE %d.%d.\n",
ha->fcode_revision[1], ha->fcode_revision[0]);
break;
case ROM_CODE_TYPE_EFI:
/* Extensible Firmware Interface (EFI). */
ha->efi_revision[0] = bcode[0x12];
ha->efi_revision[1] = bcode[0x13];
ql_dbg(ql_dbg_init, vha, 0x0158,
"Read EFI %d.%d.\n",
ha->efi_revision[1], ha->efi_revision[0]);
break;
default:
ql_log(ql_log_warn, vha, 0x0159,
"Unrecognized code type %x at pcids %x.\n",
code_type, pcids);
break;
}
last_image = bcode[0x15] & BIT_7;
/* Locate next PCI expansion ROM. */
pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
} while (!last_image);
/* Read firmware image information. */
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
dcode = mbuf;
ha->isp_ops->read_optrom(vha, dcode, ha->flt_region_fw << 2, 0x20);
bcode = mbuf + (pcihdr % 4);
/* Validate signature of PCI data structure. */
if (bcode[0x0] == 0x3 && bcode[0x1] == 0x0 &&
bcode[0x2] == 0x40 && bcode[0x3] == 0x40) {
ha->fw_revision[0] = bcode[0x4];
ha->fw_revision[1] = bcode[0x5];
ha->fw_revision[2] = bcode[0x6];
ql_dbg(ql_dbg_init, vha, 0x0153,
"Firmware revision %d.%d.%d\n",
ha->fw_revision[0], ha->fw_revision[1],
ha->fw_revision[2]);
}
return ret;
}
int
qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
{
int ret = QLA_SUCCESS;
uint32_t pcihdr = 0, pcids = 0;
uint32_t *dcode = mbuf;
uint8_t *bcode = mbuf;
uint8_t code_type, last_image;
int i;
struct qla_hw_data *ha = vha->hw;
uint32_t faddr = 0;
struct active_regions active_regions = { };
if (IS_P3P_TYPE(ha))
return QLA_SUCCESS;
if (!mbuf)
return QLA_FUNCTION_FAILED;
memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
pcihdr = ha->flt_region_boot << 2;
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
qla27xx_get_active_image(vha, &active_regions);
if (active_regions.global == QLA27XX_SECONDARY_IMAGE) {
pcihdr = ha->flt_region_boot_sec << 2;
}
}
do {
/* Verify PCI expansion ROM header. */
ret = qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
if (ret) {
ql_log(ql_log_info, vha, 0x017d,
"Unable to read PCI EXP Rom Header(%x).\n", ret);
return QLA_FUNCTION_FAILED;
}
bcode = mbuf + (pcihdr % 4);
if (memcmp(bcode, "\x55\xaa", 2)) {
/* No signature */
ql_log(ql_log_fatal, vha, 0x0059,
"No matching ROM signature.\n");
return QLA_FUNCTION_FAILED;
}
/* Locate PCI data structure. */
pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
ret = qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
if (ret) {
ql_log(ql_log_info, vha, 0x018e,
"Unable to read PCI Data Structure (%x).\n", ret);
return QLA_FUNCTION_FAILED;
}
bcode = mbuf + (pcihdr % 4);
/* Validate signature of PCI data structure. */
if (memcmp(bcode, "PCIR", 4)) {
/* Incorrect header. */
ql_log(ql_log_fatal, vha, 0x005a,
"PCI data struct not found pcir_adr=%x.\n", pcids);
ql_dump_buffer(ql_dbg_init, vha, 0x0059, dcode, 32);
return QLA_FUNCTION_FAILED;
}
/* Read version */
code_type = bcode[0x14];
switch (code_type) {
case ROM_CODE_TYPE_BIOS:
/* Intel x86, PC-AT compatible. */
ha->bios_revision[0] = bcode[0x12];
ha->bios_revision[1] = bcode[0x13];
ql_dbg(ql_dbg_init, vha, 0x005b,
"Read BIOS %d.%d.\n",
ha->bios_revision[1], ha->bios_revision[0]);
break;
case ROM_CODE_TYPE_FCODE:
/* Open Firmware standard for PCI (FCode). */
ha->fcode_revision[0] = bcode[0x12];
ha->fcode_revision[1] = bcode[0x13];
ql_dbg(ql_dbg_init, vha, 0x005c,
"Read FCODE %d.%d.\n",
ha->fcode_revision[1], ha->fcode_revision[0]);
break;
case ROM_CODE_TYPE_EFI:
/* Extensible Firmware Interface (EFI). */
ha->efi_revision[0] = bcode[0x12];
ha->efi_revision[1] = bcode[0x13];
ql_dbg(ql_dbg_init, vha, 0x005d,
"Read EFI %d.%d.\n",
ha->efi_revision[1], ha->efi_revision[0]);
break;
default:
ql_log(ql_log_warn, vha, 0x005e,
"Unrecognized code type %x at pcids %x.\n",
code_type, pcids);
break;
}
last_image = bcode[0x15] & BIT_7;
/* Locate next PCI expansion ROM. */
pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
} while (!last_image);
/* Read firmware image information. */
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
faddr = ha->flt_region_fw;
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
qla27xx_get_active_image(vha, &active_regions);
if (active_regions.global == QLA27XX_SECONDARY_IMAGE)
faddr = ha->flt_region_fw_sec;
}
ret = qla24xx_read_flash_data(vha, dcode, faddr, 8);
if (ret) {
ql_log(ql_log_info, vha, 0x019e,
"Unable to read FW version (%x).\n", ret);
return ret;
} else {
if (qla24xx_risc_firmware_invalid(dcode)) {
ql_log(ql_log_warn, vha, 0x005f,
"Unrecognized fw revision at %x.\n",
ha->flt_region_fw * 4);
ql_dump_buffer(ql_dbg_init, vha, 0x005f, dcode, 32);
} else {
for (i = 0; i < 4; i++)
ha->fw_revision[i] =
be32_to_cpu((__force __be32)dcode[4+i]);
ql_dbg(ql_dbg_init, vha, 0x0060,
"Firmware revision (flash) %u.%u.%u (%x).\n",
ha->fw_revision[0], ha->fw_revision[1],
ha->fw_revision[2], ha->fw_revision[3]);
}
}
/* Check for golden firmware and get version if available */
if (!IS_QLA81XX(ha)) {
/* Golden firmware is not present in non 81XX adapters */
return ret;
}
memset(ha->gold_fw_version, 0, sizeof(ha->gold_fw_version));
faddr = ha->flt_region_gold_fw;
ret = qla24xx_read_flash_data(vha, dcode, ha->flt_region_gold_fw, 8);
if (ret) {
ql_log(ql_log_info, vha, 0x019f,
"Unable to read Gold FW version (%x).\n", ret);
return ret;
} else {
if (qla24xx_risc_firmware_invalid(dcode)) {
ql_log(ql_log_warn, vha, 0x0056,
"Unrecognized golden fw at %#x.\n", faddr);
ql_dump_buffer(ql_dbg_init, vha, 0x0056, dcode, 32);
return QLA_FUNCTION_FAILED;
}
for (i = 0; i < 4; i++)
ha->gold_fw_version[i] =
be32_to_cpu((__force __be32)dcode[4+i]);
}
return ret;
}
static int
qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
{
if (pos >= end || *pos != 0x82)
return 0;
pos += 3 + pos[1];
if (pos >= end || *pos != 0x90)
return 0;
pos += 3 + pos[1];
if (pos >= end || *pos != 0x78)
return 0;
return 1;
}
int
qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
{
struct qla_hw_data *ha = vha->hw;
uint8_t *pos = ha->vpd;
uint8_t *end = pos + ha->vpd_size;
int len = 0;
if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
return 0;
while (pos < end && *pos != 0x78) {
len = (*pos == 0x82) ? pos[1] : pos[2];
if (!strncmp(pos, key, strlen(key)))
break;
if (*pos != 0x90 && *pos != 0x91)
pos += len;
pos += 3;
}
if (pos < end - len && *pos != 0x78)
return scnprintf(str, size, "%.*s", len, pos + 3);
return 0;
}
int
qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
{
int len, max_len;
uint32_t fcp_prio_addr;
struct qla_hw_data *ha = vha->hw;
if (!ha->fcp_prio_cfg) {
ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
if (!ha->fcp_prio_cfg) {
ql_log(ql_log_warn, vha, 0x00d5,
"Unable to allocate memory for fcp priority data (%x).\n",
FCP_PRIO_CFG_SIZE);
return QLA_FUNCTION_FAILED;
}
}
memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
fcp_prio_addr = ha->flt_region_fcp_prio;
/* first read the fcp priority data header from flash */
ha->isp_ops->read_optrom(vha, ha->fcp_prio_cfg,
fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 0))
goto fail;
/* read remaining FCP CMD config data from flash */
fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
len = ha->fcp_prio_cfg->num_entries * sizeof(struct qla_fcp_prio_entry);
max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
ha->isp_ops->read_optrom(vha, &ha->fcp_prio_cfg->entry[0],
fcp_prio_addr << 2, (len < max_len ? len : max_len));
/* revalidate the entire FCP priority config data, including entries */
if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 1))
goto fail;
ha->flags.fcp_prio_enabled = 1;
return QLA_SUCCESS;
fail:
vfree(ha->fcp_prio_cfg);
ha->fcp_prio_cfg = NULL;
return QLA_FUNCTION_FAILED;
}