mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
fdcfd85433
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
216 lines
6.1 KiB
C
216 lines
6.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* A SPI driver for the Ricoh RS5C348 RTC
|
|
*
|
|
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
|
|
*
|
|
* The board specific init code should provide characteristics of this
|
|
* device:
|
|
* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS
|
|
*/
|
|
|
|
#include <linux/bcd.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/module.h>
|
|
|
|
#define RS5C348_REG_SECS 0
|
|
#define RS5C348_REG_MINS 1
|
|
#define RS5C348_REG_HOURS 2
|
|
#define RS5C348_REG_WDAY 3
|
|
#define RS5C348_REG_DAY 4
|
|
#define RS5C348_REG_MONTH 5
|
|
#define RS5C348_REG_YEAR 6
|
|
#define RS5C348_REG_CTL1 14
|
|
#define RS5C348_REG_CTL2 15
|
|
|
|
#define RS5C348_SECS_MASK 0x7f
|
|
#define RS5C348_MINS_MASK 0x7f
|
|
#define RS5C348_HOURS_MASK 0x3f
|
|
#define RS5C348_WDAY_MASK 0x03
|
|
#define RS5C348_DAY_MASK 0x3f
|
|
#define RS5C348_MONTH_MASK 0x1f
|
|
|
|
#define RS5C348_BIT_PM 0x20 /* REG_HOURS */
|
|
#define RS5C348_BIT_Y2K 0x80 /* REG_MONTH */
|
|
#define RS5C348_BIT_24H 0x20 /* REG_CTL1 */
|
|
#define RS5C348_BIT_XSTP 0x10 /* REG_CTL2 */
|
|
#define RS5C348_BIT_VDET 0x40 /* REG_CTL2 */
|
|
|
|
#define RS5C348_CMD_W(addr) (((addr) << 4) | 0x08) /* single write */
|
|
#define RS5C348_CMD_R(addr) (((addr) << 4) | 0x0c) /* single read */
|
|
#define RS5C348_CMD_MW(addr) (((addr) << 4) | 0x00) /* burst write */
|
|
#define RS5C348_CMD_MR(addr) (((addr) << 4) | 0x04) /* burst read */
|
|
|
|
struct rs5c348_plat_data {
|
|
struct rtc_device *rtc;
|
|
int rtc_24h;
|
|
};
|
|
|
|
static int
|
|
rs5c348_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
|
|
u8 txbuf[5+7], *txp;
|
|
int ret;
|
|
|
|
ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & RS5C348_BIT_XSTP) {
|
|
txbuf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
|
|
txbuf[1] = 0;
|
|
ret = spi_write_then_read(spi, txbuf, 2, NULL, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* Transfer 5 bytes before writing SEC. This gives 31us for carry. */
|
|
txp = txbuf;
|
|
txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
|
|
txbuf[1] = 0; /* dummy */
|
|
txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
|
|
txbuf[3] = 0; /* dummy */
|
|
txbuf[4] = RS5C348_CMD_MW(RS5C348_REG_SECS); /* cmd, sec, ... */
|
|
txp = &txbuf[5];
|
|
txp[RS5C348_REG_SECS] = bin2bcd(tm->tm_sec);
|
|
txp[RS5C348_REG_MINS] = bin2bcd(tm->tm_min);
|
|
if (pdata->rtc_24h) {
|
|
txp[RS5C348_REG_HOURS] = bin2bcd(tm->tm_hour);
|
|
} else {
|
|
/* hour 0 is AM12, noon is PM12 */
|
|
txp[RS5C348_REG_HOURS] = bin2bcd((tm->tm_hour + 11) % 12 + 1) |
|
|
(tm->tm_hour >= 12 ? RS5C348_BIT_PM : 0);
|
|
}
|
|
txp[RS5C348_REG_WDAY] = bin2bcd(tm->tm_wday);
|
|
txp[RS5C348_REG_DAY] = bin2bcd(tm->tm_mday);
|
|
txp[RS5C348_REG_MONTH] = bin2bcd(tm->tm_mon + 1) |
|
|
(tm->tm_year >= 100 ? RS5C348_BIT_Y2K : 0);
|
|
txp[RS5C348_REG_YEAR] = bin2bcd(tm->tm_year % 100);
|
|
/* write in one transfer to avoid data inconsistency */
|
|
ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), NULL, 0);
|
|
udelay(62); /* Tcsr 62us */
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
|
|
u8 txbuf[5], rxbuf[7];
|
|
int ret;
|
|
|
|
ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & RS5C348_BIT_VDET)
|
|
dev_warn(&spi->dev, "voltage-low detected.\n");
|
|
if (ret & RS5C348_BIT_XSTP) {
|
|
dev_warn(&spi->dev, "oscillator-stop detected.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Transfer 5 byte befores reading SEC. This gives 31us for carry. */
|
|
txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
|
|
txbuf[1] = 0; /* dummy */
|
|
txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
|
|
txbuf[3] = 0; /* dummy */
|
|
txbuf[4] = RS5C348_CMD_MR(RS5C348_REG_SECS); /* cmd, sec, ... */
|
|
|
|
/* read in one transfer to avoid data inconsistency */
|
|
ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
|
|
rxbuf, sizeof(rxbuf));
|
|
udelay(62); /* Tcsr 62us */
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tm->tm_sec = bcd2bin(rxbuf[RS5C348_REG_SECS] & RS5C348_SECS_MASK);
|
|
tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK);
|
|
tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK);
|
|
if (!pdata->rtc_24h) {
|
|
if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) {
|
|
tm->tm_hour -= 20;
|
|
tm->tm_hour %= 12;
|
|
tm->tm_hour += 12;
|
|
} else
|
|
tm->tm_hour %= 12;
|
|
}
|
|
tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK);
|
|
tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK);
|
|
tm->tm_mon =
|
|
bcd2bin(rxbuf[RS5C348_REG_MONTH] & RS5C348_MONTH_MASK) - 1;
|
|
/* year is 1900 + tm->tm_year */
|
|
tm->tm_year = bcd2bin(rxbuf[RS5C348_REG_YEAR]) +
|
|
((rxbuf[RS5C348_REG_MONTH] & RS5C348_BIT_Y2K) ? 100 : 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops rs5c348_rtc_ops = {
|
|
.read_time = rs5c348_rtc_read_time,
|
|
.set_time = rs5c348_rtc_set_time,
|
|
};
|
|
|
|
static int rs5c348_probe(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
struct rtc_device *rtc;
|
|
struct rs5c348_plat_data *pdata;
|
|
|
|
pdata = devm_kzalloc(&spi->dev, sizeof(struct rs5c348_plat_data),
|
|
GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
spi->dev.platform_data = pdata;
|
|
|
|
/* Check D7 of SECOND register */
|
|
ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
|
|
if (ret < 0 || (ret & 0x80)) {
|
|
dev_err(&spi->dev, "not found.\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&spi->dev, "spiclk %u KHz.\n",
|
|
(spi->max_speed_hz + 500) / 1000);
|
|
|
|
ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & RS5C348_BIT_24H)
|
|
pdata->rtc_24h = 1;
|
|
|
|
rtc = devm_rtc_allocate_device(&spi->dev);
|
|
if (IS_ERR(rtc))
|
|
return PTR_ERR(rtc);
|
|
|
|
pdata->rtc = rtc;
|
|
|
|
rtc->ops = &rs5c348_rtc_ops;
|
|
|
|
return devm_rtc_register_device(rtc);
|
|
}
|
|
|
|
static struct spi_driver rs5c348_driver = {
|
|
.driver = {
|
|
.name = "rtc-rs5c348",
|
|
},
|
|
.probe = rs5c348_probe,
|
|
};
|
|
|
|
module_spi_driver(rs5c348_driver);
|
|
|
|
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
|
|
MODULE_DESCRIPTION("Ricoh RS5C348 RTC driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:rtc-rs5c348");
|