mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
a37bdde620
Ben Dooks's email address is <ben.dooks@codethink.co.uk>. Fix Ben Dooks's email address in MODULE_AUTHOR. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220506232850.220582-1-nobuhiro1.iwamatsu@toshiba.co.jp
406 lines
10 KiB
C
406 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* RTC driver for the interal RTC block in the Amlogic Meson6, Meson8,
|
|
* Meson8b and Meson8m2 SoCs.
|
|
*
|
|
* The RTC is split in to two parts, the AHB front end and a simple serial
|
|
* connection to the actual registers. This driver manages both parts.
|
|
*
|
|
* Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
* Copyright (c) 2015 Ben Dooks <ben.dooks@codethink.co.uk> for Codethink Ltd
|
|
* Based on origin by Carlo Caione <carlo@endlessm.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/rtc.h>
|
|
|
|
/* registers accessed from cpu bus */
|
|
#define RTC_ADDR0 0x00
|
|
#define RTC_ADDR0_LINE_SCLK BIT(0)
|
|
#define RTC_ADDR0_LINE_SEN BIT(1)
|
|
#define RTC_ADDR0_LINE_SDI BIT(2)
|
|
#define RTC_ADDR0_START_SER BIT(17)
|
|
#define RTC_ADDR0_WAIT_SER BIT(22)
|
|
#define RTC_ADDR0_DATA GENMASK(31, 24)
|
|
|
|
#define RTC_ADDR1 0x04
|
|
#define RTC_ADDR1_SDO BIT(0)
|
|
#define RTC_ADDR1_S_READY BIT(1)
|
|
|
|
#define RTC_ADDR2 0x08
|
|
#define RTC_ADDR3 0x0c
|
|
|
|
#define RTC_REG4 0x10
|
|
#define RTC_REG4_STATIC_VALUE GENMASK(7, 0)
|
|
|
|
/* rtc registers accessed via rtc-serial interface */
|
|
#define RTC_COUNTER (0)
|
|
#define RTC_SEC_ADJ (2)
|
|
#define RTC_REGMEM_0 (4)
|
|
#define RTC_REGMEM_1 (5)
|
|
#define RTC_REGMEM_2 (6)
|
|
#define RTC_REGMEM_3 (7)
|
|
|
|
#define RTC_ADDR_BITS (3) /* number of address bits to send */
|
|
#define RTC_DATA_BITS (32) /* number of data bits to tx/rx */
|
|
|
|
#define MESON_STATIC_BIAS_CUR (0x5 << 1)
|
|
#define MESON_STATIC_VOLTAGE (0x3 << 11)
|
|
#define MESON_STATIC_DEFAULT (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE)
|
|
|
|
struct meson_rtc {
|
|
struct rtc_device *rtc; /* rtc device we created */
|
|
struct device *dev; /* device we bound from */
|
|
struct reset_control *reset; /* reset source */
|
|
struct regulator *vdd; /* voltage input */
|
|
struct regmap *peripheral; /* peripheral registers */
|
|
struct regmap *serial; /* serial registers */
|
|
};
|
|
|
|
static const struct regmap_config meson_rtc_peripheral_regmap_config = {
|
|
.name = "peripheral-registers",
|
|
.reg_bits = 8,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = RTC_REG4,
|
|
.fast_io = true,
|
|
};
|
|
|
|
/* RTC front-end serialiser controls */
|
|
|
|
static void meson_rtc_sclk_pulse(struct meson_rtc *rtc)
|
|
{
|
|
udelay(5);
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0);
|
|
udelay(5);
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK,
|
|
RTC_ADDR0_LINE_SCLK);
|
|
}
|
|
|
|
static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit)
|
|
{
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI,
|
|
bit ? RTC_ADDR0_LINE_SDI : 0);
|
|
meson_rtc_sclk_pulse(rtc);
|
|
}
|
|
|
|
static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data,
|
|
unsigned int nr)
|
|
{
|
|
u32 bit = 1 << (nr - 1);
|
|
|
|
while (bit) {
|
|
meson_rtc_send_bit(rtc, data & bit);
|
|
bit >>= 1;
|
|
}
|
|
}
|
|
|
|
static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode)
|
|
{
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0);
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0);
|
|
meson_rtc_send_bit(rtc, mode);
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0);
|
|
}
|
|
|
|
static u32 meson_rtc_get_data(struct meson_rtc *rtc)
|
|
{
|
|
u32 tmp, val = 0;
|
|
int bit;
|
|
|
|
for (bit = 0; bit < RTC_DATA_BITS; bit++) {
|
|
meson_rtc_sclk_pulse(rtc);
|
|
val <<= 1;
|
|
|
|
regmap_read(rtc->peripheral, RTC_ADDR1, &tmp);
|
|
val |= tmp & RTC_ADDR1_SDO;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int meson_rtc_get_bus(struct meson_rtc *rtc)
|
|
{
|
|
int ret, retries;
|
|
u32 val;
|
|
|
|
/* prepare bus for transfers, set all lines low */
|
|
val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK;
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0);
|
|
|
|
for (retries = 0; retries < 3; retries++) {
|
|
/* wait for the bus to be ready */
|
|
if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val,
|
|
val & RTC_ADDR1_S_READY, 10,
|
|
10000))
|
|
return 0;
|
|
|
|
dev_warn(rtc->dev, "failed to get bus, resetting RTC\n");
|
|
|
|
ret = reset_control_reset(rtc->reset);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
dev_err(rtc->dev, "bus is not ready\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg,
|
|
unsigned int *data)
|
|
{
|
|
struct meson_rtc *rtc = context;
|
|
int ret;
|
|
|
|
ret = meson_rtc_get_bus(rtc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN,
|
|
RTC_ADDR0_LINE_SEN);
|
|
meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS);
|
|
meson_rtc_set_dir(rtc, 0);
|
|
*data = meson_rtc_get_data(rtc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg,
|
|
unsigned int data)
|
|
{
|
|
struct meson_rtc *rtc = context;
|
|
int ret;
|
|
|
|
ret = meson_rtc_get_bus(rtc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN,
|
|
RTC_ADDR0_LINE_SEN);
|
|
meson_rtc_send_bits(rtc, data, RTC_DATA_BITS);
|
|
meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS);
|
|
meson_rtc_set_dir(rtc, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_bus meson_rtc_serial_bus = {
|
|
.reg_read = meson_rtc_serial_bus_reg_read,
|
|
.reg_write = meson_rtc_serial_bus_reg_write,
|
|
};
|
|
|
|
static const struct regmap_config meson_rtc_serial_regmap_config = {
|
|
.name = "serial-registers",
|
|
.reg_bits = 4,
|
|
.reg_stride = 1,
|
|
.val_bits = 32,
|
|
.max_register = RTC_REGMEM_3,
|
|
.fast_io = false,
|
|
};
|
|
|
|
static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data)
|
|
{
|
|
u32 tmp;
|
|
|
|
regmap_write(rtc->peripheral, RTC_REG4,
|
|
FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8)));
|
|
|
|
/* write the static value and start the auto serializer */
|
|
tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER;
|
|
regmap_update_bits(rtc->peripheral, RTC_ADDR0,
|
|
RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp);
|
|
|
|
/* wait for the auto serializer to complete */
|
|
return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp,
|
|
!(tmp & RTC_ADDR0_WAIT_SER), 10,
|
|
10000);
|
|
}
|
|
|
|
/* RTC interface layer functions */
|
|
|
|
static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct meson_rtc *rtc = dev_get_drvdata(dev);
|
|
u32 time;
|
|
int ret;
|
|
|
|
ret = regmap_read(rtc->serial, RTC_COUNTER, &time);
|
|
if (!ret)
|
|
rtc_time64_to_tm(time, tm);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int meson_rtc_settime(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct meson_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm));
|
|
}
|
|
|
|
static const struct rtc_class_ops meson_rtc_ops = {
|
|
.read_time = meson_rtc_gettime,
|
|
.set_time = meson_rtc_settime,
|
|
};
|
|
|
|
/* NVMEM interface layer functions */
|
|
|
|
static int meson_rtc_regmem_read(void *context, unsigned int offset,
|
|
void *buf, size_t bytes)
|
|
{
|
|
struct meson_rtc *rtc = context;
|
|
unsigned int read_offset, read_size;
|
|
|
|
read_offset = RTC_REGMEM_0 + (offset / 4);
|
|
read_size = bytes / 4;
|
|
|
|
return regmap_bulk_read(rtc->serial, read_offset, buf, read_size);
|
|
}
|
|
|
|
static int meson_rtc_regmem_write(void *context, unsigned int offset,
|
|
void *buf, size_t bytes)
|
|
{
|
|
struct meson_rtc *rtc = context;
|
|
unsigned int write_offset, write_size;
|
|
|
|
write_offset = RTC_REGMEM_0 + (offset / 4);
|
|
write_size = bytes / 4;
|
|
|
|
return regmap_bulk_write(rtc->serial, write_offset, buf, write_size);
|
|
}
|
|
|
|
static int meson_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct nvmem_config meson_rtc_nvmem_config = {
|
|
.name = "meson-rtc-regmem",
|
|
.type = NVMEM_TYPE_BATTERY_BACKED,
|
|
.word_size = 4,
|
|
.stride = 4,
|
|
.size = 4 * 4,
|
|
.reg_read = meson_rtc_regmem_read,
|
|
.reg_write = meson_rtc_regmem_write,
|
|
};
|
|
struct device *dev = &pdev->dev;
|
|
struct meson_rtc *rtc;
|
|
void __iomem *base;
|
|
int ret;
|
|
u32 tm;
|
|
|
|
rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL);
|
|
if (!rtc)
|
|
return -ENOMEM;
|
|
|
|
rtc->rtc = devm_rtc_allocate_device(dev);
|
|
if (IS_ERR(rtc->rtc))
|
|
return PTR_ERR(rtc->rtc);
|
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
rtc->dev = dev;
|
|
|
|
rtc->rtc->ops = &meson_rtc_ops;
|
|
rtc->rtc->range_max = U32_MAX;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
rtc->peripheral = devm_regmap_init_mmio(dev, base,
|
|
&meson_rtc_peripheral_regmap_config);
|
|
if (IS_ERR(rtc->peripheral)) {
|
|
dev_err(dev, "failed to create peripheral regmap\n");
|
|
return PTR_ERR(rtc->peripheral);
|
|
}
|
|
|
|
rtc->reset = devm_reset_control_get(dev, NULL);
|
|
if (IS_ERR(rtc->reset)) {
|
|
dev_err(dev, "missing reset line\n");
|
|
return PTR_ERR(rtc->reset);
|
|
}
|
|
|
|
rtc->vdd = devm_regulator_get(dev, "vdd");
|
|
if (IS_ERR(rtc->vdd)) {
|
|
dev_err(dev, "failed to get the vdd-supply\n");
|
|
return PTR_ERR(rtc->vdd);
|
|
}
|
|
|
|
ret = regulator_enable(rtc->vdd);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable vdd-supply\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set static values\n");
|
|
goto out_disable_vdd;
|
|
}
|
|
|
|
rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc,
|
|
&meson_rtc_serial_regmap_config);
|
|
if (IS_ERR(rtc->serial)) {
|
|
dev_err(dev, "failed to create serial regmap\n");
|
|
ret = PTR_ERR(rtc->serial);
|
|
goto out_disable_vdd;
|
|
}
|
|
|
|
/*
|
|
* check if we can read RTC counter, if not then the RTC is probably
|
|
* not functional. If it isn't probably best to not bind.
|
|
*/
|
|
ret = regmap_read(rtc->serial, RTC_COUNTER, &tm);
|
|
if (ret) {
|
|
dev_err(dev, "cannot read RTC counter, RTC not functional\n");
|
|
goto out_disable_vdd;
|
|
}
|
|
|
|
meson_rtc_nvmem_config.priv = rtc;
|
|
ret = devm_rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config);
|
|
if (ret)
|
|
goto out_disable_vdd;
|
|
|
|
ret = devm_rtc_register_device(rtc->rtc);
|
|
if (ret)
|
|
goto out_disable_vdd;
|
|
|
|
return 0;
|
|
|
|
out_disable_vdd:
|
|
regulator_disable(rtc->vdd);
|
|
return ret;
|
|
}
|
|
|
|
static const __maybe_unused struct of_device_id meson_rtc_dt_match[] = {
|
|
{ .compatible = "amlogic,meson6-rtc", },
|
|
{ .compatible = "amlogic,meson8-rtc", },
|
|
{ .compatible = "amlogic,meson8b-rtc", },
|
|
{ .compatible = "amlogic,meson8m2-rtc", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, meson_rtc_dt_match);
|
|
|
|
static struct platform_driver meson_rtc_driver = {
|
|
.probe = meson_rtc_probe,
|
|
.driver = {
|
|
.name = "meson-rtc",
|
|
.of_match_table = of_match_ptr(meson_rtc_dt_match),
|
|
},
|
|
};
|
|
module_platform_driver(meson_rtc_driver);
|
|
|
|
MODULE_DESCRIPTION("Amlogic Meson RTC Driver");
|
|
MODULE_AUTHOR("Ben Dooks <ben.dooks@codethink.co.uk>");
|
|
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:meson-rtc");
|