linux/drivers/mmc/host/dw_mmc-exynos.c
Uwe Kleine-König 078e548af9 mmc: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/mmc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240927145832.754697-2-u.kleine-koenig@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14 12:29:01 +02:00

700 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
*
* Copyright (C) 2012, Samsung Electronics Co., Ltd.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"
#include "dw_mmc-exynos.h"
/* Variations in Exynos specific dw-mshc controller */
enum dw_mci_exynos_type {
DW_MCI_TYPE_EXYNOS4210,
DW_MCI_TYPE_EXYNOS4412,
DW_MCI_TYPE_EXYNOS5250,
DW_MCI_TYPE_EXYNOS5420,
DW_MCI_TYPE_EXYNOS5420_SMU,
DW_MCI_TYPE_EXYNOS7,
DW_MCI_TYPE_EXYNOS7_SMU,
DW_MCI_TYPE_ARTPEC8,
};
/* Exynos implementation specific driver private data */
struct dw_mci_exynos_priv_data {
enum dw_mci_exynos_type ctrl_type;
u8 ciu_div;
u32 sdr_timing;
u32 ddr_timing;
u32 hs400_timing;
u32 tuned_sample;
u32 cur_speed;
u32 dqs_delay;
u32 saved_dqs_en;
u32 saved_strobe_ctrl;
};
static struct dw_mci_exynos_compatible {
char *compatible;
enum dw_mci_exynos_type ctrl_type;
} exynos_compat[] = {
{
.compatible = "samsung,exynos4210-dw-mshc",
.ctrl_type = DW_MCI_TYPE_EXYNOS4210,
}, {
.compatible = "samsung,exynos4412-dw-mshc",
.ctrl_type = DW_MCI_TYPE_EXYNOS4412,
}, {
.compatible = "samsung,exynos5250-dw-mshc",
.ctrl_type = DW_MCI_TYPE_EXYNOS5250,
}, {
.compatible = "samsung,exynos5420-dw-mshc",
.ctrl_type = DW_MCI_TYPE_EXYNOS5420,
}, {
.compatible = "samsung,exynos5420-dw-mshc-smu",
.ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU,
}, {
.compatible = "samsung,exynos7-dw-mshc",
.ctrl_type = DW_MCI_TYPE_EXYNOS7,
}, {
.compatible = "samsung,exynos7-dw-mshc-smu",
.ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU,
}, {
.compatible = "axis,artpec8-dw-mshc",
.ctrl_type = DW_MCI_TYPE_ARTPEC8,
},
};
static inline u8 dw_mci_exynos_get_ciu_div(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
return EXYNOS4412_FIXED_CIU_CLK_DIV;
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
return EXYNOS4210_FIXED_CIU_CLK_DIV;
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL64)) + 1;
else
return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL)) + 1;
}
static void dw_mci_exynos_config_smu(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
/*
* If Exynos is provided the Security management,
* set for non-ecryption mode at this time.
*/
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
mci_writel(host, MPSBEGIN0, 0);
mci_writel(host, MPSEND0, SDMMC_ENDING_SEC_NR_MAX);
mci_writel(host, MPSCTRL0, SDMMC_MPSCTRL_SECURE_WRITE_BIT |
SDMMC_MPSCTRL_NON_SECURE_READ_BIT |
SDMMC_MPSCTRL_VALID |
SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT);
}
}
static int dw_mci_exynos_priv_init(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
dw_mci_exynos_config_smu(host);
if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) {
priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL);
priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN);
priv->saved_dqs_en |= AXI_NON_BLOCKING_WR;
mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en);
if (!priv->dqs_delay)
priv->dqs_delay =
DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl);
}
if (priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) {
/* Quirk needed for the ARTPEC-8 SoC */
host->quirks |= DW_MMC_QUIRK_EXTENDED_TMOUT;
}
host->bus_hz /= (priv->ciu_div + 1);
return 0;
}
static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
clksel = mci_readl(host, CLKSEL64);
else
clksel = mci_readl(host, CLKSEL);
clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
mci_writel(host, CLKSEL64, clksel);
else
mci_writel(host, CLKSEL, clksel);
/*
* Exynos4412 and Exynos5250 extends the use of CMD register with the
* use of bit 29 (which is reserved on standard MSHC controllers) for
* optionally bypassing the HOLD register for command and data. The
* HOLD register should be bypassed in case there is no phase shift
* applied on CMD/DATA that is sent to the card.
*/
if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel) && host->slot)
set_bit(DW_MMC_CARD_NO_USE_HOLD, &host->slot->flags);
}
#ifdef CONFIG_PM
static int dw_mci_exynos_runtime_resume(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
int ret;
ret = dw_mci_runtime_resume(dev);
if (ret)
return ret;
dw_mci_exynos_config_smu(host);
return ret;
}
#endif /* CONFIG_PM */
#ifdef CONFIG_PM_SLEEP
/**
* dw_mci_exynos_suspend_noirq - Exynos-specific suspend code
* @dev: Device to suspend (this device)
*
* This ensures that device will be in runtime active state in
* dw_mci_exynos_resume_noirq after calling pm_runtime_force_resume()
*/
static int dw_mci_exynos_suspend_noirq(struct device *dev)
{
pm_runtime_get_noresume(dev);
return pm_runtime_force_suspend(dev);
}
/**
* dw_mci_exynos_resume_noirq - Exynos-specific resume code
* @dev: Device to resume (this device)
*
* On exynos5420 there is a silicon errata that will sometimes leave the
* WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate
* that it fired and we can clear it by writing a 1 back. Clear it to prevent
* interrupts from going off constantly.
*
* We run this code on all exynos variants because it doesn't hurt.
*/
static int dw_mci_exynos_resume_noirq(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
int ret;
ret = pm_runtime_force_resume(dev);
if (ret)
return ret;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
clksel = mci_readl(host, CLKSEL64);
else
clksel = mci_readl(host, CLKSEL);
if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
mci_writel(host, CLKSEL64, clksel);
else
mci_writel(host, CLKSEL, clksel);
}
pm_runtime_put(dev);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
u32 dqs, strobe;
/*
* Not supported to configure register
* related to HS400
*/
if ((priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) ||
(priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)) {
if (timing == MMC_TIMING_MMC_HS400)
dev_warn(host->dev,
"cannot configure HS400, unsupported chipset\n");
return;
}
dqs = priv->saved_dqs_en;
strobe = priv->saved_strobe_ctrl;
if (timing == MMC_TIMING_MMC_HS400) {
dqs |= DATA_STROBE_EN;
strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay);
} else if (timing == MMC_TIMING_UHS_SDR104) {
dqs &= 0xffffff00;
} else {
dqs &= ~DATA_STROBE_EN;
}
mci_writel(host, HS400_DQS_EN, dqs);
mci_writel(host, HS400_DLINE_CTRL, strobe);
}
static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
unsigned long actual;
u8 div;
int ret;
/*
* Don't care if wanted clock is zero or
* ciu clock is unavailable
*/
if (!wanted || IS_ERR(host->ciu_clk))
return;
/* Guaranteed minimum frequency for cclkin */
if (wanted < EXYNOS_CCLKIN_MIN)
wanted = EXYNOS_CCLKIN_MIN;
if (wanted == priv->cur_speed)
return;
div = dw_mci_exynos_get_ciu_div(host);
ret = clk_set_rate(host->ciu_clk, wanted * div);
if (ret)
dev_warn(host->dev,
"failed to set clk-rate %u error: %d\n",
wanted * div, ret);
actual = clk_get_rate(host->ciu_clk);
host->bus_hz = actual / div;
priv->cur_speed = wanted;
host->current_speed = 0;
}
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
unsigned int wanted = ios->clock;
u32 timing = ios->timing, clksel;
switch (timing) {
case MMC_TIMING_MMC_HS400:
/* Update tuned sample timing */
clksel = SDMMC_CLKSEL_UP_SAMPLE(
priv->hs400_timing, priv->tuned_sample);
wanted <<= 1;
break;
case MMC_TIMING_MMC_DDR52:
clksel = priv->ddr_timing;
/* Should be double rate for DDR mode */
if (ios->bus_width == MMC_BUS_WIDTH_8)
wanted <<= 1;
break;
case MMC_TIMING_UHS_SDR104:
case MMC_TIMING_UHS_SDR50:
clksel = (priv->sdr_timing & 0xfff8ffff) |
(priv->ciu_div << 16);
break;
case MMC_TIMING_UHS_DDR50:
clksel = (priv->ddr_timing & 0xfff8ffff) |
(priv->ciu_div << 16);
break;
default:
clksel = priv->sdr_timing;
}
/* Set clock timing for the requested speed mode*/
dw_mci_exynos_set_clksel_timing(host, clksel);
/* Configure setting for HS400 */
dw_mci_exynos_config_hs400(host, timing);
/* Configure clock rate */
dw_mci_exynos_adjust_clock(host, wanted);
}
static int dw_mci_exynos_parse_dt(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv;
struct device_node *np = host->dev->of_node;
u32 timing[2];
u32 div = 0;
int idx;
int ret;
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
if (of_device_is_compatible(np, exynos_compat[idx].compatible))
priv->ctrl_type = exynos_compat[idx].ctrl_type;
}
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
priv->ciu_div = EXYNOS4412_FIXED_CIU_CLK_DIV - 1;
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
priv->ciu_div = EXYNOS4210_FIXED_CIU_CLK_DIV - 1;
else {
of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
priv->ciu_div = div;
}
ret = of_property_read_u32_array(np,
"samsung,dw-mshc-sdr-timing", timing, 2);
if (ret)
return ret;
priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
ret = of_property_read_u32_array(np,
"samsung,dw-mshc-ddr-timing", timing, 2);
if (ret)
return ret;
priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
ret = of_property_read_u32_array(np,
"samsung,dw-mshc-hs400-timing", timing, 2);
if (!ret && of_property_read_u32(np,
"samsung,read-strobe-delay", &priv->dqs_delay))
dev_dbg(host->dev,
"read-strobe-delay is not found, assuming usage of default value\n");
priv->hs400_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1],
HS400_FIXED_CIU_CLK_DIV);
host->priv = priv;
return 0;
}
static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
else
return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
}
static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
{
u32 clksel;
struct dw_mci_exynos_priv_data *priv = host->priv;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
clksel = mci_readl(host, CLKSEL64);
else
clksel = mci_readl(host, CLKSEL);
clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
mci_writel(host, CLKSEL64, clksel);
else
mci_writel(host, CLKSEL, clksel);
}
static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
u8 sample;
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
clksel = mci_readl(host, CLKSEL64);
else
clksel = mci_readl(host, CLKSEL);
sample = (clksel + 1) & 0x7;
clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
mci_writel(host, CLKSEL64, clksel);
else
mci_writel(host, CLKSEL, clksel);
return sample;
}
static s8 dw_mci_exynos_get_best_clksmpl(u8 candidates)
{
const u8 iter = 8;
u8 __c;
s8 i, loc = -1;
for (i = 0; i < iter; i++) {
__c = ror8(candidates, i);
if ((__c & 0xc7) == 0xc7) {
loc = i;
goto out;
}
}
for (i = 0; i < iter; i++) {
__c = ror8(candidates, i);
if ((__c & 0x83) == 0x83) {
loc = i;
goto out;
}
}
/*
* If there is no cadiates value, then it needs to return -EIO.
* If there are candidates values and don't find bset clk sample value,
* then use a first candidates clock sample value.
*/
for (i = 0; i < iter; i++) {
__c = ror8(candidates, i);
if ((__c & 0x1) == 0x1) {
loc = i;
goto out;
}
}
out:
return loc;
}
static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
{
struct dw_mci *host = slot->host;
struct dw_mci_exynos_priv_data *priv = host->priv;
struct mmc_host *mmc = slot->mmc;
u8 start_smpl, smpl, candidates = 0;
s8 found;
int ret = 0;
start_smpl = dw_mci_exynos_get_clksmpl(host);
do {
mci_writel(host, TMOUT, ~0);
smpl = dw_mci_exynos_move_next_clksmpl(host);
if (!mmc_send_tuning(mmc, opcode, NULL))
candidates |= (1 << smpl);
} while (start_smpl != smpl);
found = dw_mci_exynos_get_best_clksmpl(candidates);
if (found >= 0) {
dw_mci_exynos_set_clksmpl(host, found);
priv->tuned_sample = found;
} else {
ret = -EIO;
dev_warn(&mmc->class_dev,
"There is no candidates value about clksmpl!\n");
}
return ret;
}
static int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host,
struct mmc_ios *ios)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing);
dw_mci_exynos_adjust_clock(host, (ios->clock) << 1);
return 0;
}
static void dw_mci_exynos_set_data_timeout(struct dw_mci *host,
unsigned int timeout_ns)
{
u32 clk_div, tmout;
u64 tmp;
unsigned int tmp2;
clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2;
if (clk_div == 0)
clk_div = 1;
tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC);
tmp = DIV_ROUND_UP_ULL(tmp, clk_div);
/* TMOUT[7:0] (RESPONSE_TIMEOUT) */
tmout = 0xFF; /* Set maximum */
/*
* Extended HW timer (max = 0x6FFFFF2):
* ((TMOUT[10:8] - 1) * 0xFFFFFF + TMOUT[31:11] * 8)
*/
if (!tmp || tmp > 0x6FFFFF2)
tmout |= (0xFFFFFF << 8);
else {
/* TMOUT[10:8] */
tmp2 = (((unsigned int)tmp / 0xFFFFFF) + 1) & 0x7;
tmout |= tmp2 << 8;
/* TMOUT[31:11] */
tmp = tmp - ((tmp2 - 1) * 0xFFFFFF);
tmout |= (tmp & 0xFFFFF8) << 8;
}
mci_writel(host, TMOUT, tmout);
dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: %#08x",
timeout_ns, tmout >> 8);
}
static u32 dw_mci_exynos_get_drto_clks(struct dw_mci *host)
{
u32 drto_clks;
drto_clks = mci_readl(host, TMOUT) >> 8;
return (((drto_clks & 0x7) - 1) * 0xFFFFFF) + ((drto_clks & 0xFFFFF8));
}
/* Common capabilities of Exynos4/Exynos5 SoC */
static unsigned long exynos_dwmmc_caps[4] = {
MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA,
0,
0,
0,
};
static const struct dw_mci_drv_data exynos_drv_data = {
.caps = exynos_dwmmc_caps,
.num_caps = ARRAY_SIZE(exynos_dwmmc_caps),
.common_caps = MMC_CAP_CMD23,
.init = dw_mci_exynos_priv_init,
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
.execute_tuning = dw_mci_exynos_execute_tuning,
.prepare_hs400_tuning = dw_mci_exynos_prepare_hs400_tuning,
};
static const struct dw_mci_drv_data artpec_drv_data = {
.common_caps = MMC_CAP_CMD23,
.init = dw_mci_exynos_priv_init,
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
.execute_tuning = dw_mci_exynos_execute_tuning,
.set_data_timeout = dw_mci_exynos_set_data_timeout,
.get_drto_clks = dw_mci_exynos_get_drto_clks,
};
static const struct of_device_id dw_mci_exynos_match[] = {
{ .compatible = "samsung,exynos4412-dw-mshc",
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos5250-dw-mshc",
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos5420-dw-mshc",
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos5420-dw-mshc-smu",
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos7-dw-mshc",
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos7-dw-mshc-smu",
.data = &exynos_drv_data, },
{ .compatible = "axis,artpec8-dw-mshc",
.data = &artpec_drv_data, },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
static int dw_mci_exynos_probe(struct platform_device *pdev)
{
const struct dw_mci_drv_data *drv_data;
const struct of_device_id *match;
int ret;
match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
drv_data = match->data;
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = dw_mci_pltfm_register(pdev, drv_data);
if (ret) {
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
return ret;
}
return 0;
}
static void dw_mci_exynos_remove(struct platform_device *pdev)
{
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
dw_mci_pltfm_remove(pdev);
}
static const struct dev_pm_ops dw_mci_exynos_pmops = {
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend_noirq,
dw_mci_exynos_resume_noirq)
SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
dw_mci_exynos_runtime_resume,
NULL)
};
static struct platform_driver dw_mci_exynos_pltfm_driver = {
.probe = dw_mci_exynos_probe,
.remove = dw_mci_exynos_remove,
.driver = {
.name = "dwmmc_exynos",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_exynos_match,
.pm = &dw_mci_exynos_pmops,
},
};
module_platform_driver(dw_mci_exynos_pltfm_driver);
MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension");
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:dwmmc_exynos");