mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
cf3e10cc0e
dtc generates the following warning when building the LAN966x devicetree
overlay (lan966x_pci.dtso):
Warning (interrupts_property): /fragment@0/__overlay__/pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent
The oic interrupt parent is the PCI device itself. The PCI device node
is the node on which the dtbo will be applied and this node already has
properties needed.
In order to remove the warning, add the missing properties in the
overlay fragment node. Properties in this node will not be added when
the overlay is applied (which is what we expect) but makes dtc happy.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb4 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241029084338.194942-3-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
178 lines
4.0 KiB
Plaintext
178 lines
4.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2022 Microchip UNG
|
|
*/
|
|
|
|
#include <dt-bindings/clock/microchip,lan966x.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/mfd/atmel-flexcom.h>
|
|
#include <dt-bindings/phy/phy-lan966x-serdes.h>
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
/ {
|
|
fragment@0 {
|
|
target-path = "";
|
|
|
|
/*
|
|
* These properties allow to avoid a dtc warnings.
|
|
* The real interrupt controller is the PCI device itself. It
|
|
* is the node on which the device tree overlay will be applied.
|
|
* This node has those properties.
|
|
*/
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
|
|
__overlay__ {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
cpu_clk: clock-600000000 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <600000000>; /* CPU clock = 600MHz */
|
|
};
|
|
|
|
ddr_clk: clock-30000000 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <30000000>; /* Fabric clock = 30MHz */
|
|
};
|
|
|
|
sys_clk: clock-15625000 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <15625000>; /* System clock = 15.625MHz */
|
|
};
|
|
|
|
pci-ep-bus@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/*
|
|
* map @0xe2000000 (32MB) to BAR0 (CPU)
|
|
* map @0xe0000000 (16MB) to BAR1 (AMBA)
|
|
*/
|
|
ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
|
|
0xe0000000 0x01 0x00 0x00 0x1000000>;
|
|
|
|
oic: oic@e00c0120 {
|
|
compatible = "microchip,lan966x-oic";
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
interrupts = <0>; /* PCI INTx assigned interrupt */
|
|
reg = <0xe00c0120 0x190>;
|
|
};
|
|
|
|
cpu_ctrl: syscon@e00c0000 {
|
|
compatible = "microchip,lan966x-cpu-syscon", "syscon";
|
|
reg = <0xe00c0000 0xa8>;
|
|
};
|
|
|
|
reset: reset@e200400c {
|
|
compatible = "microchip,lan966x-switch-reset";
|
|
reg = <0xe200400c 0x4>, <0xe00c0000 0xa8>;
|
|
reg-names = "gcb","cpu";
|
|
#reset-cells = <1>;
|
|
cpu-syscon = <&cpu_ctrl>;
|
|
};
|
|
|
|
gpio: pinctrl@e2004064 {
|
|
compatible = "microchip,lan966x-pinctrl";
|
|
reg = <0xe2004064 0xb4>,
|
|
<0xe2010024 0x138>;
|
|
resets = <&reset 0>;
|
|
reset-names = "switch";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&gpio 0 0 78>;
|
|
interrupt-parent = <&oic>;
|
|
interrupt-controller;
|
|
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <2>;
|
|
|
|
tod_pins: tod_pins {
|
|
pins = "GPIO_36";
|
|
function = "ptpsync_1";
|
|
};
|
|
|
|
fc0_a_pins: fcb4-i2c-pins {
|
|
/* RXD, TXD */
|
|
pins = "GPIO_9", "GPIO_10";
|
|
function = "fc0_a";
|
|
};
|
|
|
|
};
|
|
|
|
serdes: serdes@e202c000 {
|
|
compatible = "microchip,lan966x-serdes";
|
|
reg = <0xe202c000 0x9c>,
|
|
<0xe2004010 0x4>;
|
|
#phy-cells = <2>;
|
|
};
|
|
|
|
mdio1: mdio@e200413c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "microchip,lan966x-miim";
|
|
reg = <0xe200413c 0x24>,
|
|
<0xe2010020 0x4>;
|
|
|
|
resets = <&reset 0>;
|
|
reset-names = "switch";
|
|
|
|
lan966x_phy0: ethernet-lan966x_phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
lan966x_phy1: ethernet-lan966x_phy@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
switch: switch@e0000000 {
|
|
compatible = "microchip,lan966x-switch";
|
|
reg = <0xe0000000 0x0100000>,
|
|
<0xe2000000 0x0800000>;
|
|
reg-names = "cpu", "gcb";
|
|
|
|
interrupt-parent = <&oic>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<9 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "xtr", "ana";
|
|
|
|
resets = <&reset 0>;
|
|
reset-names = "switch";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tod_pins>;
|
|
|
|
ethernet-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port0: port@0 {
|
|
phy-handle = <&lan966x_phy0>;
|
|
|
|
reg = <0>;
|
|
phy-mode = "gmii";
|
|
phys = <&serdes 0 CU(0)>;
|
|
};
|
|
|
|
port1: port@1 {
|
|
phy-handle = <&lan966x_phy1>;
|
|
|
|
reg = <1>;
|
|
phy-mode = "gmii";
|
|
phys = <&serdes 1 CU(1)>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|