mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
b45c696c27
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240624125101.1242750-2-u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
300 lines
7.8 KiB
C
300 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
|
|
*
|
|
* Written by: Grant Likely <grant.likely@secretlab.ca>
|
|
*
|
|
* Copyright (C) 2007 Secret Lab Technologies Ltd.
|
|
*/
|
|
|
|
/*
|
|
* The DS1682 elapsed timer recorder is a simple device that implements
|
|
* one elapsed time counter, one event counter, an alarm signal and 10
|
|
* bytes of general purpose EEPROM.
|
|
*
|
|
* This driver provides access to the DS1682 counters and user data via
|
|
* the sysfs. The following attributes are added to the device node:
|
|
* elapsed_time (u32): Total elapsed event time in ms resolution
|
|
* alarm_time (u32): When elapsed time exceeds the value in alarm_time,
|
|
* then the alarm pin is asserted.
|
|
* event_count (u16): number of times the event pin has gone low.
|
|
* eeprom (u8[10]): general purpose EEPROM
|
|
*
|
|
* Counter registers and user data are both read/write unless the device
|
|
* has been write protected. This driver does not support turning off write
|
|
* protection. Once write protection is turned on, it is impossible to
|
|
* turn it off again, so I have left the feature out of this driver to avoid
|
|
* accidental enabling, but it is trivial to add write protect support.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/string.h>
|
|
#include <linux/list.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
|
|
/* Device registers */
|
|
#define DS1682_REG_CONFIG 0x00
|
|
#define DS1682_REG_ALARM 0x01
|
|
#define DS1682_REG_ELAPSED 0x05
|
|
#define DS1682_REG_EVT_CNTR 0x09
|
|
#define DS1682_REG_EEPROM 0x0b
|
|
#define DS1682_REG_RESET 0x1d
|
|
#define DS1682_REG_WRITE_DISABLE 0x1e
|
|
#define DS1682_REG_WRITE_MEM_DISABLE 0x1f
|
|
|
|
#define DS1682_EEPROM_SIZE 10
|
|
|
|
/*
|
|
* Generic counter attributes
|
|
*/
|
|
static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
unsigned long long val, check;
|
|
__le32 val_le = 0;
|
|
int rc;
|
|
|
|
dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
|
|
|
|
/* Read the register */
|
|
rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
|
|
(u8 *)&val_le);
|
|
if (rc < 0)
|
|
return -EIO;
|
|
|
|
val = le32_to_cpu(val_le);
|
|
|
|
if (sattr->index == DS1682_REG_ELAPSED) {
|
|
int retries = 5;
|
|
|
|
/* Detect and retry when a tick occurs mid-read */
|
|
do {
|
|
rc = i2c_smbus_read_i2c_block_data(client, sattr->index,
|
|
sattr->nr,
|
|
(u8 *)&val_le);
|
|
if (rc < 0 || retries <= 0)
|
|
return -EIO;
|
|
|
|
check = val;
|
|
val = le32_to_cpu(val_le);
|
|
retries--;
|
|
} while (val != check && val != (check + 1));
|
|
}
|
|
|
|
/* Format the output string and return # of bytes
|
|
* Special case: the 32 bit regs are time values with 1/4s
|
|
* resolution, scale them up to milliseconds
|
|
*/
|
|
return sprintf(buf, "%llu\n", (sattr->nr == 4) ? (val * 250) : val);
|
|
}
|
|
|
|
static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
u64 val;
|
|
__le32 val_le;
|
|
int rc;
|
|
|
|
dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
|
|
|
|
/* Decode input */
|
|
rc = kstrtoull(buf, 0, &val);
|
|
if (rc < 0) {
|
|
dev_dbg(dev, "input string not a number\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Special case: the 32 bit regs are time values with 1/4s
|
|
* resolution, scale input down to quarter-seconds */
|
|
if (sattr->nr == 4)
|
|
do_div(val, 250);
|
|
|
|
/* write out the value */
|
|
val_le = cpu_to_le32(val);
|
|
rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
|
|
(u8 *) & val_le);
|
|
if (rc < 0) {
|
|
dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
|
|
sattr->index, sattr->nr);
|
|
return -EIO;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Simple register attributes
|
|
*/
|
|
static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
|
|
ds1682_store, 4, DS1682_REG_ELAPSED);
|
|
static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
|
|
ds1682_store, 4, DS1682_REG_ALARM);
|
|
static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
|
|
ds1682_store, 2, DS1682_REG_EVT_CNTR);
|
|
|
|
static const struct attribute_group ds1682_group = {
|
|
.attrs = (struct attribute *[]) {
|
|
&sensor_dev_attr_elapsed_time.dev_attr.attr,
|
|
&sensor_dev_attr_alarm_time.dev_attr.attr,
|
|
&sensor_dev_attr_event_count.dev_attr.attr,
|
|
NULL,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* User data attribute
|
|
*/
|
|
static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct i2c_client *client = kobj_to_i2c_client(kobj);
|
|
int rc;
|
|
|
|
dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
|
|
buf, off, count);
|
|
|
|
rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
|
|
count, buf);
|
|
if (rc < 0)
|
|
return -EIO;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct i2c_client *client = kobj_to_i2c_client(kobj);
|
|
|
|
dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
|
|
buf, off, count);
|
|
|
|
/* Write out to the device */
|
|
if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
|
|
count, buf) < 0)
|
|
return -EIO;
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct bin_attribute ds1682_eeprom_attr = {
|
|
.attr = {
|
|
.name = "eeprom",
|
|
.mode = S_IRUGO | S_IWUSR,
|
|
},
|
|
.size = DS1682_EEPROM_SIZE,
|
|
.read = ds1682_eeprom_read,
|
|
.write = ds1682_eeprom_write,
|
|
};
|
|
|
|
static int ds1682_nvmem_read(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
struct i2c_client *client = priv;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + offset,
|
|
bytes, val);
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static int ds1682_nvmem_write(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
struct i2c_client *client = priv;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + offset,
|
|
bytes, val);
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
/*
|
|
* Called when a ds1682 device is matched with this driver
|
|
*/
|
|
static int ds1682_probe(struct i2c_client *client)
|
|
{
|
|
struct nvmem_config config = {
|
|
.dev = &client->dev,
|
|
.owner = THIS_MODULE,
|
|
.type = NVMEM_TYPE_EEPROM,
|
|
.reg_read = ds1682_nvmem_read,
|
|
.reg_write = ds1682_nvmem_write,
|
|
.size = DS1682_EEPROM_SIZE,
|
|
.priv = client,
|
|
};
|
|
struct nvmem_device *nvmem;
|
|
int rc;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_I2C_BLOCK)) {
|
|
dev_err(&client->dev, "i2c bus does not support the ds1682\n");
|
|
rc = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
nvmem = devm_nvmem_register(&client->dev, &config);
|
|
if (IS_ENABLED(CONFIG_NVMEM) && IS_ERR(nvmem))
|
|
return PTR_ERR(nvmem);
|
|
|
|
rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
|
|
if (rc)
|
|
goto exit;
|
|
|
|
rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
|
|
if (rc)
|
|
goto exit_bin_attr;
|
|
|
|
return 0;
|
|
|
|
exit_bin_attr:
|
|
sysfs_remove_group(&client->dev.kobj, &ds1682_group);
|
|
exit:
|
|
return rc;
|
|
}
|
|
|
|
static void ds1682_remove(struct i2c_client *client)
|
|
{
|
|
sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
|
|
sysfs_remove_group(&client->dev.kobj, &ds1682_group);
|
|
}
|
|
|
|
static const struct i2c_device_id ds1682_id[] = {
|
|
{ "ds1682" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ds1682_id);
|
|
|
|
static const struct of_device_id ds1682_of_match[] = {
|
|
{ .compatible = "dallas,ds1682", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ds1682_of_match);
|
|
|
|
static struct i2c_driver ds1682_driver = {
|
|
.driver = {
|
|
.name = "ds1682",
|
|
.of_match_table = ds1682_of_match,
|
|
},
|
|
.probe = ds1682_probe,
|
|
.remove = ds1682_remove,
|
|
.id_table = ds1682_id,
|
|
};
|
|
|
|
module_i2c_driver(ds1682_driver);
|
|
|
|
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
|
|
MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
|
|
MODULE_LICENSE("GPL");
|