mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
fe358e57af
Modify the startup procedure to reflect the procedure of the Bosch BME68x Sensor API. The initial readings and configuration of the sensor need to happen in the following order: 1) Read calibration data [1,2] 2) Chip general configuration [3] 3) Gas configuration [4] After the chip configuration it is necessary to ensure that the sensor is in sleeping mode, in order to apply the gas configuration settings [5]. Also, after the soft reset, it is advised to wait for 5ms [6]. Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L162 # [1] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L44 # [2] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L53 # [3] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L60 # [4] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L640 # [5] Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L294 # [6] Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240609233826.330516-12-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
83 lines
2.4 KiB
C
83 lines
2.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef BME680_H_
|
|
#define BME680_H_
|
|
|
|
#define BME680_REG_CHIP_ID 0xD0
|
|
#define BME680_CHIP_ID_VAL 0x61
|
|
#define BME680_REG_SOFT_RESET 0xE0
|
|
#define BME680_CMD_SOFTRESET 0xB6
|
|
#define BME680_REG_STATUS 0x73
|
|
#define BME680_SPI_MEM_PAGE_BIT BIT(4)
|
|
#define BME680_SPI_MEM_PAGE_1_VAL 1
|
|
|
|
#define BME680_REG_TEMP_MSB 0x22
|
|
#define BME680_REG_PRESS_MSB 0x1F
|
|
#define BME680_REG_HUMIDITY_MSB 0x25
|
|
#define BME680_REG_GAS_MSB 0x2A
|
|
#define BME680_REG_GAS_R_LSB 0x2B
|
|
#define BME680_GAS_STAB_BIT BIT(4)
|
|
#define BME680_GAS_RANGE_MASK GENMASK(3, 0)
|
|
|
|
#define BME680_REG_CTRL_HUMIDITY 0x72
|
|
#define BME680_OSRS_HUMIDITY_MASK GENMASK(2, 0)
|
|
|
|
#define BME680_REG_CTRL_MEAS 0x74
|
|
#define BME680_OSRS_TEMP_MASK GENMASK(7, 5)
|
|
#define BME680_OSRS_PRESS_MASK GENMASK(4, 2)
|
|
#define BME680_MODE_MASK GENMASK(1, 0)
|
|
#define BME680_MODE_FORCED 1
|
|
#define BME680_MODE_SLEEP 0
|
|
|
|
#define BME680_REG_CONFIG 0x75
|
|
#define BME680_FILTER_MASK GENMASK(4, 2)
|
|
#define BME680_FILTER_COEFF_VAL BIT(1)
|
|
|
|
/* TEMP/PRESS/HUMID reading skipped */
|
|
#define BME680_MEAS_SKIPPED 0x8000
|
|
|
|
#define BME680_MAX_OVERFLOW_VAL 0x40000000
|
|
#define BME680_HUM_REG_SHIFT_VAL 4
|
|
#define BME680_BIT_H1_DATA_MASK GENMASK(3, 0)
|
|
|
|
#define BME680_RHRANGE_MASK GENMASK(5, 4)
|
|
#define BME680_REG_RES_HEAT_VAL 0x00
|
|
#define BME680_RSERROR_MASK GENMASK(7, 4)
|
|
#define BME680_REG_RES_HEAT_0 0x5A
|
|
#define BME680_REG_GAS_WAIT_0 0x64
|
|
#define BME680_ADC_GAS_RES GENMASK(15, 6)
|
|
#define BME680_AMB_TEMP 25
|
|
|
|
#define BME680_REG_CTRL_GAS_1 0x71
|
|
#define BME680_RUN_GAS_MASK BIT(4)
|
|
#define BME680_NB_CONV_MASK GENMASK(3, 0)
|
|
|
|
#define BME680_REG_MEAS_STAT_0 0x1D
|
|
#define BME680_NEW_DATA_BIT BIT(7)
|
|
#define BME680_GAS_MEAS_BIT BIT(6)
|
|
#define BME680_MEAS_BIT BIT(5)
|
|
|
|
#define BME680_TEMP_NUM_BYTES 3
|
|
#define BME680_PRESS_NUM_BYTES 3
|
|
#define BME680_HUMID_NUM_BYTES 2
|
|
#define BME680_GAS_NUM_BYTES 2
|
|
|
|
#define BME680_MEAS_TRIM_MASK GENMASK(24, 4)
|
|
|
|
#define BME680_STARTUP_TIME_US 5000
|
|
|
|
/* Calibration Parameters */
|
|
#define BME680_T2_LSB_REG 0x8A
|
|
#define BME680_H2_MSB_REG 0xE1
|
|
#define BME680_GH3_REG 0xEE
|
|
|
|
#define BME680_CALIB_RANGE_1_LEN 23
|
|
#define BME680_CALIB_RANGE_2_LEN 14
|
|
#define BME680_CALIB_RANGE_3_LEN 5
|
|
|
|
extern const struct regmap_config bme680_regmap_config;
|
|
|
|
int bme680_core_probe(struct device *dev, struct regmap *regmap,
|
|
const char *name);
|
|
|
|
#endif /* BME680_H_ */
|