linux/drivers/hid/hid-mcp2200.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * MCP2200 - Microchip USB to GPIO bridge
 *
 * Copyright (c) 2023, Johannes Roith <johannes@gnu-linux.rocks>
 *
 * Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22228A.pdf
 * App Note for HID: https://ww1.microchip.com/downloads/en/DeviceDoc/93066A.pdf
 */
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/hid.h>
#include <linux/hidraw.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include "hid-ids.h"

/* Commands codes in a raw output report */
#define SET_CLEAR_OUTPUTS	0x08
#define CONFIGURE		0x10
#define READ_EE			0x20
#define WRITE_EE		0x40
#define READ_ALL		0x80

/* MCP GPIO direction encoding */
enum MCP_IO_DIR {
	MCP2200_DIR_OUT = 0x00,
	MCP2200_DIR_IN  = 0x01,
};

/* Altternative pin assignments */
#define TXLED		2
#define RXLED		3
#define USBCFG		6
#define SSPND		7
#define MCP_NGPIO	8

/* CMD to set or clear a GPIO output */
struct mcp_set_clear_outputs {
	u8 cmd;
	u8 dummys1[10];
	u8 set_bmap;
	u8 clear_bmap;
	u8 dummys2[3];
} __packed;

/* CMD to configure the IOs */
struct mcp_configure {
	u8 cmd;
	u8 dummys1[3];
	u8 io_bmap;
	u8 config_alt_pins;
	u8 io_default_val_bmap;
	u8 config_alt_options;
	u8 baud_h;
	u8 baud_l;
	u8 dummys2[6];
} __packed;

/* CMD to read all parameters */
struct mcp_read_all {
	u8 cmd;
	u8 dummys[15];
} __packed;

/* Response to the read all cmd */
struct mcp_read_all_resp {
	u8 cmd;
	u8 eep_addr;
	u8 dummy;
	u8 eep_val;
	u8 io_bmap;
	u8 config_alt_pins;
	u8 io_default_val_bmap;
	u8 config_alt_options;
	u8 baud_h;
	u8 baud_l;
	u8 io_port_val_bmap;
	u8 dummys[5];
} __packed;

struct mcp2200 {
	struct hid_device *hdev;
	struct mutex lock;
	struct completion wait_in_report;
	u8 gpio_dir;
	u8 gpio_val;
	u8 gpio_inval;
	u8 baud_h;
	u8 baud_l;
	u8 config_alt_pins;
	u8 gpio_reset_val;
	u8 config_alt_options;
	int status;
	struct gpio_chip gc;
	u8 hid_report[16];
};

/* this executes the READ_ALL cmd */
static int mcp_cmd_read_all(struct mcp2200 *mcp)
{
	struct mcp_read_all *read_all;
	int len, t;

	reinit_completion(&mcp->wait_in_report);

	mutex_lock(&mcp->lock);

	read_all = (struct mcp_read_all *) mcp->hid_report;
	read_all->cmd = READ_ALL;
	len = hid_hw_output_report(mcp->hdev, (u8 *) read_all,
				   sizeof(struct mcp_read_all));

	mutex_unlock(&mcp->lock);

	if (len != sizeof(struct mcp_read_all))
		return -EINVAL;

	t = wait_for_completion_timeout(&mcp->wait_in_report,
					msecs_to_jiffies(4000));
	if (!t)
		return -ETIMEDOUT;

	/* return status, negative value if wrong response was received */
	return mcp->status;
}

static void mcp_set_multiple(struct gpio_chip *gc, unsigned long *mask,
			     unsigned long *bits)
{
	struct mcp2200 *mcp = gpiochip_get_data(gc);
	u8 value;
	int status;
	struct mcp_set_clear_outputs *cmd;

	mutex_lock(&mcp->lock);
	cmd = (struct mcp_set_clear_outputs *) mcp->hid_report;

	value = mcp->gpio_val & ~*mask;
	value |= (*mask & *bits);

	cmd->cmd = SET_CLEAR_OUTPUTS;
	cmd->set_bmap = value;
	cmd->clear_bmap = ~(value);

	status = hid_hw_output_report(mcp->hdev, (u8 *) cmd,
		       sizeof(struct mcp_set_clear_outputs));

	if (status == sizeof(struct mcp_set_clear_outputs))
		mcp->gpio_val = value;

	mutex_unlock(&mcp->lock);
}

static void mcp_set(struct gpio_chip *gc, unsigned int gpio_nr, int value)
{
	unsigned long mask = 1 << gpio_nr;
	unsigned long bmap_value = value << gpio_nr;

	mcp_set_multiple(gc, &mask, &bmap_value);
}

static int mcp_get_multiple(struct gpio_chip *gc, unsigned long *mask,
		unsigned long *bits)
{
	u32 val;
	struct mcp2200 *mcp = gpiochip_get_data(gc);
	int status;

	status = mcp_cmd_read_all(mcp);
	if (status)
		return status;

	val = mcp->gpio_inval;
	*bits = (val & *mask);
	return 0;
}

static int mcp_get(struct gpio_chip *gc, unsigned int gpio_nr)
{
	unsigned long mask = 0, bits = 0;

	mask = (1 << gpio_nr);
	mcp_get_multiple(gc, &mask, &bits);
	return bits > 0;
}

static int mcp_get_direction(struct gpio_chip *gc, unsigned int gpio_nr)
{
	struct mcp2200 *mcp = gpiochip_get_data(gc);

	return (mcp->gpio_dir & (MCP2200_DIR_IN << gpio_nr))
		? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
}

static int mcp_set_direction(struct gpio_chip *gc, unsigned int gpio_nr,
			     enum MCP_IO_DIR io_direction)
{
	struct mcp2200 *mcp = gpiochip_get_data(gc);
	struct mcp_configure *conf;
	int status;
	/* after the configure cmd we will need to set the outputs again */
	unsigned long mask = ~(mcp->gpio_dir); /* only set outputs */
	unsigned long bits = mcp->gpio_val;
	/* Offsets of alternative pins in config_alt_pins, 0 is not used */
	u8 alt_pin_conf[8] = {SSPND, USBCFG, 0, 0, 0, 0, RXLED, TXLED};
	u8 config_alt_pins = mcp->config_alt_pins;

	/* Read in the reset baudrate first, we need it later */
	status = mcp_cmd_read_all(mcp);
	if (status != 0)
		return status;

	mutex_lock(&mcp->lock);
	conf = (struct mcp_configure  *) mcp->hid_report;

	/* configure will reset the chip! */
	conf->cmd = CONFIGURE;
	conf->io_bmap = (mcp->gpio_dir & ~(1 << gpio_nr))
		| (io_direction << gpio_nr);
	/* Don't overwrite the reset parameters */
	conf->baud_h = mcp->baud_h;
	conf->baud_l = mcp->baud_l;
	conf->config_alt_options = mcp->config_alt_options;
	conf->io_default_val_bmap = mcp->gpio_reset_val;
	/* Adjust alt. func if necessary */
	if (alt_pin_conf[gpio_nr])
		config_alt_pins &= ~(1 << alt_pin_conf[gpio_nr]);
	conf->config_alt_pins = config_alt_pins;

	status = hid_hw_output_report(mcp->hdev, (u8 *) conf,
				      sizeof(struct mcp_set_clear_outputs));

	if (status == sizeof(struct mcp_set_clear_outputs)) {
		mcp->gpio_dir = conf->io_bmap;
		mcp->config_alt_pins = config_alt_pins;
	} else {
		mutex_unlock(&mcp->lock);
		return -EIO;
	}

	mutex_unlock(&mcp->lock);

	/* Configure CMD will clear all IOs -> rewrite them */
	mcp_set_multiple(gc, &mask, &bits);
	return 0;
}

static int mcp_direction_input(struct gpio_chip *gc, unsigned int gpio_nr)
{
	return mcp_set_direction(gc, gpio_nr, MCP2200_DIR_IN);
}

static int mcp_direction_output(struct gpio_chip *gc, unsigned int gpio_nr,
				int value)
{
	int ret;
	unsigned long mask, bmap_value;

	mask = 1 << gpio_nr;
	bmap_value = value << gpio_nr;

	ret = mcp_set_direction(gc, gpio_nr, MCP2200_DIR_OUT);
	if (!ret)
		mcp_set_multiple(gc, &mask, &bmap_value);
	return ret;
}

static const struct gpio_chip template_chip = {
	.label			= "mcp2200",
	.owner			= THIS_MODULE,
	.get_direction		= mcp_get_direction,
	.direction_input	= mcp_direction_input,
	.direction_output	= mcp_direction_output,
	.set			= mcp_set,
	.set_multiple		= mcp_set_multiple,
	.get			= mcp_get,
	.get_multiple		= mcp_get_multiple,
	.base			= -1,
	.ngpio			= MCP_NGPIO,
	.can_sleep		= true,
};

/*
 * MCP2200 uses interrupt endpoint for input reports. This function
 * is called by HID layer when it receives i/p report from mcp2200,
 * which is actually a response to the previously sent command.
 */
static int mcp2200_raw_event(struct hid_device *hdev, struct hid_report *report,
		u8 *data, int size)
{
	struct mcp2200 *mcp = hid_get_drvdata(hdev);
	struct mcp_read_all_resp *all_resp;

	switch (data[0]) {
	case READ_ALL:
		all_resp = (struct mcp_read_all_resp *) data;
		mcp->status = 0;
		mcp->gpio_inval = all_resp->io_port_val_bmap;
		mcp->baud_h = all_resp->baud_h;
		mcp->baud_l = all_resp->baud_l;
		mcp->gpio_reset_val = all_resp->io_default_val_bmap;
		mcp->config_alt_pins = all_resp->config_alt_pins;
		mcp->config_alt_options = all_resp->config_alt_options;
		break;
	default:
		mcp->status = -EIO;
		break;
	}

	complete(&mcp->wait_in_report);
	return 0;
}

static int mcp2200_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
	int ret;
	struct mcp2200 *mcp;

	mcp = devm_kzalloc(&hdev->dev, sizeof(*mcp), GFP_KERNEL);
	if (!mcp)
		return -ENOMEM;

	ret = hid_parse(hdev);
	if (ret) {
		hid_err(hdev, "can't parse reports\n");
		return ret;
	}

	ret = hid_hw_start(hdev, 0);
	if (ret) {
		hid_err(hdev, "can't start hardware\n");
		return ret;
	}

	hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8,
			hdev->version & 0xff, hdev->name, hdev->phys);

	ret = hid_hw_open(hdev);
	if (ret) {
		hid_err(hdev, "can't open device\n");
		hid_hw_stop(hdev);
		return ret;
	}

	mutex_init(&mcp->lock);
	init_completion(&mcp->wait_in_report);
	hid_set_drvdata(hdev, mcp);
	mcp->hdev = hdev;

	mcp->gc = template_chip;
	mcp->gc.parent = &hdev->dev;

	ret = devm_gpiochip_add_data(&hdev->dev, &mcp->gc, mcp);
	if (ret < 0) {
		hid_err(hdev, "Unable to register gpiochip\n");
		hid_hw_close(hdev);
		hid_hw_stop(hdev);
		return ret;
	}

	return 0;
}

static void mcp2200_remove(struct hid_device *hdev)
{
	hid_hw_close(hdev);
	hid_hw_stop(hdev);
}

static const struct hid_device_id mcp2200_devices[] = {
	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_MCP2200) },
	{ }
};
MODULE_DEVICE_TABLE(hid, mcp2200_devices);

static struct hid_driver mcp2200_driver = {
	.name		= "mcp2200",
	.id_table	= mcp2200_devices,
	.probe		= mcp2200_probe,
	.remove		= mcp2200_remove,
	.raw_event	= mcp2200_raw_event,
};

/* Register with HID core */
module_hid_driver(mcp2200_driver);

MODULE_AUTHOR("Johannes Roith <johannes@gnu-linux.rocks>");
MODULE_DESCRIPTION("MCP2200 Microchip HID USB to GPIO bridge");
MODULE_LICENSE("GPL");