mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
678eefc1ca
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/gpio/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241016152435.38149-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
445 lines
12 KiB
C
445 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Digital I/O driver for Technologic Systems TS-5500
|
|
*
|
|
* Copyright (c) 2012 Savoir-faire Linux Inc.
|
|
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
|
*
|
|
* Technologic Systems platforms have pin blocks, exposing several Digital
|
|
* Input/Output lines (DIO). This driver aims to support single pin blocks.
|
|
* In that sense, the support is not limited to the TS-5500 blocks.
|
|
* Actually, the following platforms have DIO support:
|
|
*
|
|
* TS-5500:
|
|
* Documentation: https://docs.embeddedts.com/TS-5500
|
|
* Blocks: DIO1, DIO2 and LCD port.
|
|
*
|
|
* TS-5600:
|
|
* Documentation: https://docs.embeddedts.com/TS-5600
|
|
* Blocks: LCD port (identical to TS-5500 LCD).
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* List of supported Technologic Systems platforms DIO blocks */
|
|
enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD };
|
|
|
|
struct ts5500_priv {
|
|
const struct ts5500_dio *pinout;
|
|
struct gpio_chip gpio_chip;
|
|
spinlock_t lock;
|
|
bool strap;
|
|
u8 hwirq;
|
|
};
|
|
|
|
/*
|
|
* Hex 7D is used to control several blocks (e.g. DIO2 and LCD port).
|
|
* This flag ensures that the region has been requested by this driver.
|
|
*/
|
|
static bool hex7d_reserved;
|
|
|
|
/*
|
|
* This structure is used to describe capabilities of DIO lines,
|
|
* such as available directions and connected interrupt (if any).
|
|
*/
|
|
struct ts5500_dio {
|
|
const u8 value_addr;
|
|
const u8 value_mask;
|
|
const u8 control_addr;
|
|
const u8 control_mask;
|
|
const bool no_input;
|
|
const bool no_output;
|
|
const u8 irq;
|
|
};
|
|
|
|
#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit) \
|
|
{ \
|
|
.value_addr = vaddr, \
|
|
.value_mask = BIT(vbit), \
|
|
.control_addr = caddr, \
|
|
.control_mask = BIT(cbit), \
|
|
}
|
|
|
|
#define TS5500_DIO_IN(addr, bit) \
|
|
{ \
|
|
.value_addr = addr, \
|
|
.value_mask = BIT(bit), \
|
|
.no_output = true, \
|
|
}
|
|
|
|
#define TS5500_DIO_IN_IRQ(addr, bit, _irq) \
|
|
{ \
|
|
.value_addr = addr, \
|
|
.value_mask = BIT(bit), \
|
|
.no_output = true, \
|
|
.irq = _irq, \
|
|
}
|
|
|
|
#define TS5500_DIO_OUT(addr, bit) \
|
|
{ \
|
|
.value_addr = addr, \
|
|
.value_mask = BIT(bit), \
|
|
.no_input = true, \
|
|
}
|
|
|
|
/*
|
|
* Input/Output DIO lines are programmed in groups of 4. Their values are
|
|
* available through 4 consecutive bits in a value port, whereas the direction
|
|
* of these 4 lines is driven by only 1 bit in a control port.
|
|
*/
|
|
#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit) \
|
|
TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit), \
|
|
TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit), \
|
|
TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit), \
|
|
TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit)
|
|
|
|
/*
|
|
* TS-5500 DIO1 block
|
|
*
|
|
* value control dir hw
|
|
* addr bit addr bit in out irq name pin offset
|
|
*
|
|
* 0x7b 0 0x7a 0 x x DIO1_0 1 0
|
|
* 0x7b 1 0x7a 0 x x DIO1_1 3 1
|
|
* 0x7b 2 0x7a 0 x x DIO1_2 5 2
|
|
* 0x7b 3 0x7a 0 x x DIO1_3 7 3
|
|
* 0x7b 4 0x7a 1 x x DIO1_4 9 4
|
|
* 0x7b 5 0x7a 1 x x DIO1_5 11 5
|
|
* 0x7b 6 0x7a 1 x x DIO1_6 13 6
|
|
* 0x7b 7 0x7a 1 x x DIO1_7 15 7
|
|
* 0x7c 0 0x7a 5 x x DIO1_8 4 8
|
|
* 0x7c 1 0x7a 5 x x DIO1_9 6 9
|
|
* 0x7c 2 0x7a 5 x x DIO1_10 8 10
|
|
* 0x7c 3 0x7a 5 x x DIO1_11 10 11
|
|
* 0x7c 4 x DIO1_12 12 12
|
|
* 0x7c 5 x 7 DIO1_13 14 13
|
|
*/
|
|
static const struct ts5500_dio ts5500_dio1[] = {
|
|
TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0),
|
|
TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1),
|
|
TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5),
|
|
TS5500_DIO_IN(0x7c, 4),
|
|
TS5500_DIO_IN_IRQ(0x7c, 5, 7),
|
|
};
|
|
|
|
/*
|
|
* TS-5500 DIO2 block
|
|
*
|
|
* value control dir hw
|
|
* addr bit addr bit in out irq name pin offset
|
|
*
|
|
* 0x7e 0 0x7d 0 x x DIO2_0 1 0
|
|
* 0x7e 1 0x7d 0 x x DIO2_1 3 1
|
|
* 0x7e 2 0x7d 0 x x DIO2_2 5 2
|
|
* 0x7e 3 0x7d 0 x x DIO2_3 7 3
|
|
* 0x7e 4 0x7d 1 x x DIO2_4 9 4
|
|
* 0x7e 5 0x7d 1 x x DIO2_5 11 5
|
|
* 0x7e 6 0x7d 1 x x DIO2_6 13 6
|
|
* 0x7e 7 0x7d 1 x x DIO2_7 15 7
|
|
* 0x7f 0 0x7d 5 x x DIO2_8 4 8
|
|
* 0x7f 1 0x7d 5 x x DIO2_9 6 9
|
|
* 0x7f 2 0x7d 5 x x DIO2_10 8 10
|
|
* 0x7f 3 0x7d 5 x x DIO2_11 10 11
|
|
* 0x7f 4 x 6 DIO2_13 14 12
|
|
*/
|
|
static const struct ts5500_dio ts5500_dio2[] = {
|
|
TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0),
|
|
TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1),
|
|
TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5),
|
|
TS5500_DIO_IN_IRQ(0x7f, 4, 6),
|
|
};
|
|
|
|
/*
|
|
* TS-5500 LCD port used as DIO block
|
|
* TS-5600 LCD port is identical
|
|
*
|
|
* value control dir hw
|
|
* addr bit addr bit in out irq name pin offset
|
|
*
|
|
* 0x72 0 0x7d 2 x x LCD_0 8 0
|
|
* 0x72 1 0x7d 2 x x LCD_1 7 1
|
|
* 0x72 2 0x7d 2 x x LCD_2 10 2
|
|
* 0x72 3 0x7d 2 x x LCD_3 9 3
|
|
* 0x72 4 0x7d 3 x x LCD_4 12 4
|
|
* 0x72 5 0x7d 3 x x LCD_5 11 5
|
|
* 0x72 6 0x7d 3 x x LCD_6 14 6
|
|
* 0x72 7 0x7d 3 x x LCD_7 13 7
|
|
* 0x73 0 x LCD_EN 5 8
|
|
* 0x73 6 x LCD_WR 6 9
|
|
* 0x73 7 x 1 LCD_RS 3 10
|
|
*/
|
|
static const struct ts5500_dio ts5500_lcd[] = {
|
|
TS5500_DIO_GROUP(0x72, 0, 0x7d, 2),
|
|
TS5500_DIO_GROUP(0x72, 4, 0x7d, 3),
|
|
TS5500_DIO_OUT(0x73, 0),
|
|
TS5500_DIO_IN(0x73, 6),
|
|
TS5500_DIO_IN_IRQ(0x73, 7, 1),
|
|
};
|
|
|
|
static inline void ts5500_set_mask(u8 mask, u8 addr)
|
|
{
|
|
u8 val = inb(addr);
|
|
val |= mask;
|
|
outb(val, addr);
|
|
}
|
|
|
|
static inline void ts5500_clear_mask(u8 mask, u8 addr)
|
|
{
|
|
u8 val = inb(addr);
|
|
val &= ~mask;
|
|
outb(val, addr);
|
|
}
|
|
|
|
static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct ts5500_priv *priv = gpiochip_get_data(chip);
|
|
const struct ts5500_dio line = priv->pinout[offset];
|
|
unsigned long flags;
|
|
|
|
if (line.no_input)
|
|
return -ENXIO;
|
|
|
|
if (line.no_output)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
ts5500_clear_mask(line.control_mask, line.control_addr);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct ts5500_priv *priv = gpiochip_get_data(chip);
|
|
const struct ts5500_dio line = priv->pinout[offset];
|
|
|
|
return !!(inb(line.value_addr) & line.value_mask);
|
|
}
|
|
|
|
static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
struct ts5500_priv *priv = gpiochip_get_data(chip);
|
|
const struct ts5500_dio line = priv->pinout[offset];
|
|
unsigned long flags;
|
|
|
|
if (line.no_output)
|
|
return -ENXIO;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (!line.no_input)
|
|
ts5500_set_mask(line.control_mask, line.control_addr);
|
|
|
|
if (val)
|
|
ts5500_set_mask(line.value_mask, line.value_addr);
|
|
else
|
|
ts5500_clear_mask(line.value_mask, line.value_addr);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
struct ts5500_priv *priv = gpiochip_get_data(chip);
|
|
const struct ts5500_dio line = priv->pinout[offset];
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (val)
|
|
ts5500_set_mask(line.value_mask, line.value_addr);
|
|
else
|
|
ts5500_clear_mask(line.value_mask, line.value_addr);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct ts5500_priv *priv = gpiochip_get_data(chip);
|
|
const struct ts5500_dio *block = priv->pinout;
|
|
const struct ts5500_dio line = block[offset];
|
|
|
|
/* Only one pin is connected to an interrupt */
|
|
if (line.irq)
|
|
return line.irq;
|
|
|
|
/* As this pin is input-only, we may strap it to another in/out pin */
|
|
if (priv->strap)
|
|
return priv->hwirq;
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
static int ts5500_enable_irq(struct ts5500_priv *priv)
|
|
{
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (priv->hwirq == 7)
|
|
ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
|
|
else if (priv->hwirq == 6)
|
|
ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
|
|
else if (priv->hwirq == 1)
|
|
ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
|
|
else
|
|
ret = -EINVAL;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ts5500_disable_irq(struct ts5500_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (priv->hwirq == 7)
|
|
ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
|
|
else if (priv->hwirq == 6)
|
|
ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
|
|
else if (priv->hwirq == 1)
|
|
ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
|
|
else
|
|
dev_err(priv->gpio_chip.parent, "invalid hwirq %d\n",
|
|
priv->hwirq);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static int ts5500_dio_probe(struct platform_device *pdev)
|
|
{
|
|
enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data;
|
|
struct device *dev = &pdev->dev;
|
|
const char *name = dev_name(dev);
|
|
struct ts5500_priv *priv;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
priv->hwirq = ret;
|
|
spin_lock_init(&priv->lock);
|
|
|
|
priv->gpio_chip.owner = THIS_MODULE;
|
|
priv->gpio_chip.label = name;
|
|
priv->gpio_chip.parent = dev;
|
|
priv->gpio_chip.direction_input = ts5500_gpio_input;
|
|
priv->gpio_chip.direction_output = ts5500_gpio_output;
|
|
priv->gpio_chip.get = ts5500_gpio_get;
|
|
priv->gpio_chip.set = ts5500_gpio_set;
|
|
priv->gpio_chip.to_irq = ts5500_gpio_to_irq;
|
|
priv->gpio_chip.base = -1;
|
|
|
|
switch (block) {
|
|
case TS5500_DIO1:
|
|
priv->pinout = ts5500_dio1;
|
|
priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1);
|
|
|
|
if (!devm_request_region(dev, 0x7a, 3, name)) {
|
|
dev_err(dev, "failed to request %s ports\n", name);
|
|
return -EBUSY;
|
|
}
|
|
break;
|
|
case TS5500_DIO2:
|
|
priv->pinout = ts5500_dio2;
|
|
priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2);
|
|
|
|
if (!devm_request_region(dev, 0x7e, 2, name)) {
|
|
dev_err(dev, "failed to request %s ports\n", name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (hex7d_reserved)
|
|
break;
|
|
|
|
if (!devm_request_region(dev, 0x7d, 1, name)) {
|
|
dev_err(dev, "failed to request %s 7D\n", name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
hex7d_reserved = true;
|
|
break;
|
|
case TS5500_LCD:
|
|
case TS5600_LCD:
|
|
priv->pinout = ts5500_lcd;
|
|
priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd);
|
|
|
|
if (!devm_request_region(dev, 0x72, 2, name)) {
|
|
dev_err(dev, "failed to request %s ports\n", name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!hex7d_reserved) {
|
|
if (!devm_request_region(dev, 0x7d, 1, name)) {
|
|
dev_err(dev, "failed to request %s 7D\n", name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
hex7d_reserved = true;
|
|
}
|
|
|
|
/* Ensure usage of LCD port as DIO */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
ts5500_clear_mask(BIT(4), 0x7d);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
break;
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, &priv->gpio_chip, priv);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register the gpio chip\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ts5500_enable_irq(priv);
|
|
if (ret) {
|
|
dev_err(dev, "invalid interrupt %d\n", priv->hwirq);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ts5500_dio_remove(struct platform_device *pdev)
|
|
{
|
|
struct ts5500_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
ts5500_disable_irq(priv);
|
|
}
|
|
|
|
static const struct platform_device_id ts5500_dio_ids[] = {
|
|
{ "ts5500-dio1", TS5500_DIO1 },
|
|
{ "ts5500-dio2", TS5500_DIO2 },
|
|
{ "ts5500-dio-lcd", TS5500_LCD },
|
|
{ "ts5600-dio-lcd", TS5600_LCD },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, ts5500_dio_ids);
|
|
|
|
static struct platform_driver ts5500_dio_driver = {
|
|
.driver = {
|
|
.name = "ts5500-dio",
|
|
},
|
|
.probe = ts5500_dio_probe,
|
|
.remove = ts5500_dio_remove,
|
|
.id_table = ts5500_dio_ids,
|
|
};
|
|
|
|
module_platform_driver(ts5500_dio_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>");
|
|
MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver");
|