mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 11:35:45 +00:00
9f0127b9ce
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240902133148.2569486-6-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
538 lines
14 KiB
C
538 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/cleanup.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/stmpe.h>
|
|
#include <linux/property.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
|
|
/*
|
|
* These registers are modified under the irq bus lock and cached to avoid
|
|
* unnecessary writes in bus_sync_unlock.
|
|
*/
|
|
enum { REG_RE, REG_FE, REG_IE };
|
|
|
|
enum { LSB, CSB, MSB };
|
|
|
|
#define CACHE_NR_REGS 3
|
|
/* No variant has more than 24 GPIOs */
|
|
#define CACHE_NR_BANKS (24 / 8)
|
|
|
|
struct stmpe_gpio {
|
|
struct gpio_chip chip;
|
|
struct stmpe *stmpe;
|
|
struct mutex irq_lock;
|
|
u32 norequest_mask;
|
|
/* Caches of interrupt control registers for bus_lock */
|
|
u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
|
|
u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
|
|
};
|
|
|
|
static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
|
|
u8 mask = BIT(offset % 8);
|
|
int ret;
|
|
|
|
ret = stmpe_reg_read(stmpe, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return !!(ret & mask);
|
|
}
|
|
|
|
static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
|
|
u8 reg = stmpe->regs[which + (offset / 8)];
|
|
u8 mask = BIT(offset % 8);
|
|
|
|
/*
|
|
* Some variants have single register for gpio set/clear functionality.
|
|
* For them we need to write 0 to clear and 1 to set.
|
|
*/
|
|
if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
|
|
stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
|
|
else
|
|
stmpe_reg_write(stmpe, reg, mask);
|
|
}
|
|
|
|
static int stmpe_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
|
|
u8 mask = BIT(offset % 8);
|
|
int ret;
|
|
|
|
ret = stmpe_reg_read(stmpe, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & mask)
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
}
|
|
|
|
static int stmpe_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int val)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
|
|
u8 mask = BIT(offset % 8);
|
|
|
|
stmpe_gpio_set(chip, offset, val);
|
|
|
|
return stmpe_set_bits(stmpe, reg, mask, mask);
|
|
}
|
|
|
|
static int stmpe_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
|
|
u8 mask = BIT(offset % 8);
|
|
|
|
return stmpe_set_bits(stmpe, reg, mask, 0);
|
|
}
|
|
|
|
static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
|
|
if (stmpe_gpio->norequest_mask & BIT(offset))
|
|
return -EINVAL;
|
|
|
|
return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
|
|
}
|
|
|
|
static const struct gpio_chip template_chip = {
|
|
.label = "stmpe",
|
|
.owner = THIS_MODULE,
|
|
.get_direction = stmpe_gpio_get_direction,
|
|
.direction_input = stmpe_gpio_direction_input,
|
|
.get = stmpe_gpio_get,
|
|
.direction_output = stmpe_gpio_direction_output,
|
|
.set = stmpe_gpio_set,
|
|
.request = stmpe_gpio_request,
|
|
.can_sleep = true,
|
|
};
|
|
|
|
static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
int offset = d->hwirq;
|
|
int regoffset = offset / 8;
|
|
int mask = BIT(offset % 8);
|
|
|
|
if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
|
|
return -EINVAL;
|
|
|
|
/* STMPE801 and STMPE 1600 don't have RE and FE registers */
|
|
if (stmpe_gpio->stmpe->partnum == STMPE801 ||
|
|
stmpe_gpio->stmpe->partnum == STMPE1600)
|
|
return 0;
|
|
|
|
if (type & IRQ_TYPE_EDGE_RISING)
|
|
stmpe_gpio->regs[REG_RE][regoffset] |= mask;
|
|
else
|
|
stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
|
|
|
|
if (type & IRQ_TYPE_EDGE_FALLING)
|
|
stmpe_gpio->regs[REG_FE][regoffset] |= mask;
|
|
else
|
|
stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stmpe_gpio_irq_lock(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
|
|
mutex_lock(&stmpe_gpio->irq_lock);
|
|
}
|
|
|
|
static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
|
|
static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
|
|
[REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
|
|
[REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
|
|
[REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
|
|
[REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
|
|
[REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
|
|
[REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
|
|
[REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
|
|
[REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
|
|
[REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
|
|
};
|
|
int i, j;
|
|
|
|
/*
|
|
* STMPE1600: to be able to get IRQ from pins,
|
|
* a read must be done on GPMR register, or a write in
|
|
* GPSR or GPCR registers
|
|
*/
|
|
if (stmpe->partnum == STMPE1600) {
|
|
stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
|
|
stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
|
|
}
|
|
|
|
for (i = 0; i < CACHE_NR_REGS; i++) {
|
|
/* STMPE801 and STMPE1600 don't have RE and FE registers */
|
|
if ((stmpe->partnum == STMPE801 ||
|
|
stmpe->partnum == STMPE1600) &&
|
|
(i != REG_IE))
|
|
continue;
|
|
|
|
for (j = 0; j < num_banks; j++) {
|
|
u8 old = stmpe_gpio->oldregs[i][j];
|
|
u8 new = stmpe_gpio->regs[i][j];
|
|
|
|
if (new == old)
|
|
continue;
|
|
|
|
stmpe_gpio->oldregs[i][j] = new;
|
|
stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&stmpe_gpio->irq_lock);
|
|
}
|
|
|
|
static void stmpe_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
int offset = d->hwirq;
|
|
int regoffset = offset / 8;
|
|
int mask = BIT(offset % 8);
|
|
|
|
stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
|
|
gpiochip_disable_irq(gc, offset);
|
|
}
|
|
|
|
static void stmpe_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
int offset = d->hwirq;
|
|
int regoffset = offset / 8;
|
|
int mask = BIT(offset % 8);
|
|
|
|
gpiochip_enable_irq(gc, offset);
|
|
stmpe_gpio->regs[REG_IE][regoffset] |= mask;
|
|
}
|
|
|
|
static void stmpe_dbg_show_one(struct seq_file *s,
|
|
struct gpio_chip *gc,
|
|
unsigned offset, unsigned gpio)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
bool val = !!stmpe_gpio_get(gc, offset);
|
|
u8 bank = offset / 8;
|
|
u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
|
|
u8 mask = BIT(offset % 8);
|
|
int ret;
|
|
u8 dir;
|
|
|
|
char *label __free(kfree) = gpiochip_dup_line_label(gc, offset);
|
|
if (IS_ERR(label))
|
|
return;
|
|
|
|
ret = stmpe_reg_read(stmpe, dir_reg);
|
|
if (ret < 0)
|
|
return;
|
|
dir = !!(ret & mask);
|
|
|
|
if (dir) {
|
|
seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
|
|
gpio, label ?: "(none)",
|
|
val ? "hi" : "lo");
|
|
} else {
|
|
u8 edge_det_reg;
|
|
u8 rise_reg;
|
|
u8 fall_reg;
|
|
u8 irqen_reg;
|
|
|
|
static const char * const edge_det_values[] = {
|
|
"edge-inactive",
|
|
"edge-asserted",
|
|
"not-supported"
|
|
};
|
|
static const char * const rise_values[] = {
|
|
"no-rising-edge-detection",
|
|
"rising-edge-detection",
|
|
"not-supported"
|
|
};
|
|
static const char * const fall_values[] = {
|
|
"no-falling-edge-detection",
|
|
"falling-edge-detection",
|
|
"not-supported"
|
|
};
|
|
#define NOT_SUPPORTED_IDX 2
|
|
u8 edge_det = NOT_SUPPORTED_IDX;
|
|
u8 rise = NOT_SUPPORTED_IDX;
|
|
u8 fall = NOT_SUPPORTED_IDX;
|
|
bool irqen;
|
|
|
|
switch (stmpe->partnum) {
|
|
case STMPE610:
|
|
case STMPE811:
|
|
case STMPE1601:
|
|
case STMPE2401:
|
|
case STMPE2403:
|
|
edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
|
|
ret = stmpe_reg_read(stmpe, edge_det_reg);
|
|
if (ret < 0)
|
|
return;
|
|
edge_det = !!(ret & mask);
|
|
fallthrough;
|
|
case STMPE1801:
|
|
rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
|
|
fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
|
|
|
|
ret = stmpe_reg_read(stmpe, rise_reg);
|
|
if (ret < 0)
|
|
return;
|
|
rise = !!(ret & mask);
|
|
ret = stmpe_reg_read(stmpe, fall_reg);
|
|
if (ret < 0)
|
|
return;
|
|
fall = !!(ret & mask);
|
|
fallthrough;
|
|
case STMPE801:
|
|
case STMPE1600:
|
|
irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
|
|
ret = stmpe_reg_read(stmpe, irqen_reg);
|
|
if (ret < 0)
|
|
return;
|
|
irqen = !!(ret & mask);
|
|
|
|
seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s",
|
|
gpio, label ?: "(none)",
|
|
val ? "hi" : "lo",
|
|
edge_det_values[edge_det],
|
|
irqen ? "IRQ-enabled" : "IRQ-disabled",
|
|
rise_values[rise],
|
|
fall_values[fall]);
|
|
}
|
|
}
|
|
|
|
static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
|
|
{
|
|
unsigned i;
|
|
unsigned gpio = gc->base;
|
|
|
|
for (i = 0; i < gc->ngpio; i++, gpio++) {
|
|
stmpe_dbg_show_one(s, gc, i, gpio);
|
|
seq_putc(s, '\n');
|
|
}
|
|
}
|
|
|
|
static const struct irq_chip stmpe_gpio_irq_chip = {
|
|
.name = "stmpe-gpio",
|
|
.irq_bus_lock = stmpe_gpio_irq_lock,
|
|
.irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock,
|
|
.irq_mask = stmpe_gpio_irq_mask,
|
|
.irq_unmask = stmpe_gpio_irq_unmask,
|
|
.irq_set_type = stmpe_gpio_irq_set_type,
|
|
.flags = IRQCHIP_IMMUTABLE,
|
|
GPIOCHIP_IRQ_RESOURCE_HELPERS,
|
|
};
|
|
|
|
#define MAX_GPIOS 24
|
|
|
|
static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = dev;
|
|
struct stmpe *stmpe = stmpe_gpio->stmpe;
|
|
u8 statmsbreg;
|
|
int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
|
|
u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)];
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* the stmpe_block_read() call below, imposes to set statmsbreg
|
|
* with the register located at the lowest address. As STMPE1600
|
|
* variant is the only one which respect registers address's order
|
|
* (LSB regs located at lowest address than MSB ones) whereas all
|
|
* the others have a registers layout with MSB located before the
|
|
* LSB regs.
|
|
*/
|
|
if (stmpe->partnum == STMPE1600)
|
|
statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
|
|
else
|
|
statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
|
|
|
|
ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
|
|
if (ret < 0)
|
|
return IRQ_NONE;
|
|
|
|
for (i = 0; i < num_banks; i++) {
|
|
int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
|
|
num_banks - i - 1;
|
|
unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
|
|
unsigned int stat = status[i];
|
|
|
|
stat &= enabled;
|
|
if (!stat)
|
|
continue;
|
|
|
|
while (stat) {
|
|
int bit = __ffs(stat);
|
|
int line = bank * 8 + bit;
|
|
int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain,
|
|
line);
|
|
|
|
handle_nested_irq(child_irq);
|
|
stat &= ~BIT(bit);
|
|
}
|
|
|
|
/*
|
|
* interrupt status register write has no effect on
|
|
* 801/1801/1600, bits are cleared when read.
|
|
* Edge detect register is not present on 801/1600/1801
|
|
*/
|
|
if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
|
|
stmpe->partnum != STMPE1801) {
|
|
stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
|
|
stmpe_reg_write(stmpe,
|
|
stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
|
|
status[i]);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void stmpe_init_irq_valid_mask(struct gpio_chip *gc,
|
|
unsigned long *valid_mask,
|
|
unsigned int ngpios)
|
|
{
|
|
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
|
|
int i;
|
|
|
|
if (!stmpe_gpio->norequest_mask)
|
|
return;
|
|
|
|
/* Forbid unused lines to be mapped as IRQs */
|
|
for (i = 0; i < sizeof(u32); i++) {
|
|
if (stmpe_gpio->norequest_mask & BIT(i))
|
|
clear_bit(i, valid_mask);
|
|
}
|
|
}
|
|
|
|
static void stmpe_gpio_disable(void *stmpe)
|
|
{
|
|
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
|
|
}
|
|
|
|
static int stmpe_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct stmpe *stmpe = dev_get_drvdata(dev->parent);
|
|
struct stmpe_gpio *stmpe_gpio;
|
|
int ret, irq;
|
|
|
|
if (stmpe->num_gpios > MAX_GPIOS) {
|
|
dev_err(dev, "Need to increase maximum GPIO number\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
stmpe_gpio = devm_kzalloc(dev, sizeof(*stmpe_gpio), GFP_KERNEL);
|
|
if (!stmpe_gpio)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&stmpe_gpio->irq_lock);
|
|
|
|
stmpe_gpio->stmpe = stmpe;
|
|
stmpe_gpio->chip = template_chip;
|
|
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
|
|
stmpe_gpio->chip.parent = dev;
|
|
stmpe_gpio->chip.base = -1;
|
|
|
|
if (IS_ENABLED(CONFIG_DEBUG_FS))
|
|
stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
|
|
|
|
device_property_read_u32(dev, "st,norequest-mask", &stmpe_gpio->norequest_mask);
|
|
|
|
ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(dev, stmpe_gpio_disable, stmpe);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq > 0) {
|
|
struct gpio_irq_chip *girq;
|
|
|
|
ret = devm_request_threaded_irq(dev, irq, NULL, stmpe_gpio_irq,
|
|
IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "unable to register IRQ handler\n");
|
|
|
|
girq = &stmpe_gpio->chip.irq;
|
|
gpio_irq_chip_set_chip(girq, &stmpe_gpio_irq_chip);
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_simple_irq;
|
|
girq->threaded = true;
|
|
girq->init_valid_mask = stmpe_init_irq_valid_mask;
|
|
}
|
|
|
|
return devm_gpiochip_add_data(dev, &stmpe_gpio->chip, stmpe_gpio);
|
|
}
|
|
|
|
static struct platform_driver stmpe_gpio_driver = {
|
|
.driver = {
|
|
.suppress_bind_attrs = true,
|
|
.name = "stmpe-gpio",
|
|
},
|
|
.probe = stmpe_gpio_probe,
|
|
};
|
|
|
|
static int __init stmpe_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&stmpe_gpio_driver);
|
|
}
|
|
subsys_initcall(stmpe_gpio_init);
|