mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
c206d6be86
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240715194341.1755599-2-u.kleine-koenig@baylibre.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
159 lines
4.3 KiB
C
159 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* FXL6408 GPIO driver
|
|
*
|
|
* Copyright 2023 Toradex
|
|
*
|
|
* Author: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/regmap.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define FXL6408_REG_DEVICE_ID 0x01
|
|
#define FXL6408_MF_FAIRCHILD 0b101
|
|
#define FXL6408_MF_SHIFT 5
|
|
|
|
/* Bits set here indicate that the GPIO is an output. */
|
|
#define FXL6408_REG_IO_DIR 0x03
|
|
|
|
/*
|
|
* Bits set here, when the corresponding bit of IO_DIR is set, drive
|
|
* the output high instead of low.
|
|
*/
|
|
#define FXL6408_REG_OUTPUT 0x05
|
|
|
|
/* Bits here make the output High-Z, instead of the OUTPUT value. */
|
|
#define FXL6408_REG_OUTPUT_HIGH_Z 0x07
|
|
|
|
/* Returns the current status (1 = HIGH) of the input pins. */
|
|
#define FXL6408_REG_INPUT_STATUS 0x0f
|
|
|
|
/*
|
|
* Return the current interrupt status
|
|
* This bit is HIGH if input GPIO != default state (register 09h).
|
|
* The flag is cleared after being read (bit returns to 0).
|
|
* The input must go back to default state and change again before this flag is raised again.
|
|
*/
|
|
#define FXL6408_REG_INT_STS 0x13
|
|
|
|
#define FXL6408_NGPIO 8
|
|
|
|
static const struct regmap_range rd_range[] = {
|
|
{ FXL6408_REG_DEVICE_ID, FXL6408_REG_DEVICE_ID },
|
|
{ FXL6408_REG_IO_DIR, FXL6408_REG_OUTPUT },
|
|
{ FXL6408_REG_INPUT_STATUS, FXL6408_REG_INPUT_STATUS },
|
|
};
|
|
|
|
static const struct regmap_range wr_range[] = {
|
|
{ FXL6408_REG_DEVICE_ID, FXL6408_REG_DEVICE_ID },
|
|
{ FXL6408_REG_IO_DIR, FXL6408_REG_OUTPUT },
|
|
{ FXL6408_REG_OUTPUT_HIGH_Z, FXL6408_REG_OUTPUT_HIGH_Z },
|
|
};
|
|
|
|
static const struct regmap_range volatile_range[] = {
|
|
{ FXL6408_REG_DEVICE_ID, FXL6408_REG_DEVICE_ID },
|
|
{ FXL6408_REG_INPUT_STATUS, FXL6408_REG_INPUT_STATUS },
|
|
};
|
|
|
|
static const struct regmap_access_table rd_table = {
|
|
.yes_ranges = rd_range,
|
|
.n_yes_ranges = ARRAY_SIZE(rd_range),
|
|
};
|
|
|
|
static const struct regmap_access_table wr_table = {
|
|
.yes_ranges = wr_range,
|
|
.n_yes_ranges = ARRAY_SIZE(wr_range),
|
|
};
|
|
|
|
static const struct regmap_access_table volatile_table = {
|
|
.yes_ranges = volatile_range,
|
|
.n_yes_ranges = ARRAY_SIZE(volatile_range),
|
|
};
|
|
|
|
static const struct regmap_config regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = FXL6408_REG_INT_STS,
|
|
.wr_table = &wr_table,
|
|
.rd_table = &rd_table,
|
|
.volatile_table = &volatile_table,
|
|
|
|
.cache_type = REGCACHE_MAPLE,
|
|
.num_reg_defaults_raw = FXL6408_REG_INT_STS + 1,
|
|
};
|
|
|
|
static int fxl6408_identify(struct device *dev, struct regmap *regmap)
|
|
{
|
|
int val, ret;
|
|
|
|
ret = regmap_read(regmap, FXL6408_REG_DEVICE_ID, &val);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "error reading DEVICE_ID\n");
|
|
if (val >> FXL6408_MF_SHIFT != FXL6408_MF_FAIRCHILD)
|
|
return dev_err_probe(dev, -ENODEV, "invalid device id 0x%02x\n", val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fxl6408_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
int ret;
|
|
struct gpio_regmap_config gpio_config = {
|
|
.parent = dev,
|
|
.ngpio = FXL6408_NGPIO,
|
|
.reg_dat_base = GPIO_REGMAP_ADDR(FXL6408_REG_INPUT_STATUS),
|
|
.reg_set_base = GPIO_REGMAP_ADDR(FXL6408_REG_OUTPUT),
|
|
.reg_dir_out_base = GPIO_REGMAP_ADDR(FXL6408_REG_IO_DIR),
|
|
.ngpio_per_reg = FXL6408_NGPIO,
|
|
};
|
|
|
|
gpio_config.regmap = devm_regmap_init_i2c(client, ®map);
|
|
if (IS_ERR(gpio_config.regmap))
|
|
return dev_err_probe(dev, PTR_ERR(gpio_config.regmap),
|
|
"failed to allocate register map\n");
|
|
|
|
ret = fxl6408_identify(dev, gpio_config.regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Disable High-Z of outputs, so that our OUTPUT updates actually take effect. */
|
|
ret = regmap_write(gpio_config.regmap, FXL6408_REG_OUTPUT_HIGH_Z, 0);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to write 'output high Z' register\n");
|
|
|
|
return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config));
|
|
}
|
|
|
|
static const __maybe_unused struct of_device_id fxl6408_dt_ids[] = {
|
|
{ .compatible = "fcs,fxl6408" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fxl6408_dt_ids);
|
|
|
|
static const struct i2c_device_id fxl6408_id[] = {
|
|
{ "fxl6408" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, fxl6408_id);
|
|
|
|
static struct i2c_driver fxl6408_driver = {
|
|
.driver = {
|
|
.name = "fxl6408",
|
|
.of_match_table = fxl6408_dt_ids,
|
|
},
|
|
.probe = fxl6408_probe,
|
|
.id_table = fxl6408_id,
|
|
};
|
|
module_i2c_driver(fxl6408_driver);
|
|
|
|
MODULE_AUTHOR("Emanuele Ghidoli <emanuele.ghidoli@toradex.com>");
|
|
MODULE_DESCRIPTION("FXL6408 GPIO driver");
|
|
MODULE_LICENSE("GPL");
|