mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
3a0fa8e97d
'prop_map' has been unused since the original
commit e5f8efa5c8
("ARM: socfpga: fpga bridge driver support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240530205245.125513-1-linux@treblig.org
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
167 lines
4.8 KiB
C
167 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
|
|
*
|
|
* Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
|
|
*/
|
|
|
|
/*
|
|
* This driver manages a bridge between an FPGA and the SDRAM used by the ARM
|
|
* host processor system (HPS).
|
|
*
|
|
* The bridge contains 4 read ports, 4 write ports, and 6 command ports.
|
|
* Reconfiguring these ports requires that no SDRAM transactions occur during
|
|
* reconfiguration. The code reconfiguring the ports cannot run out of SDRAM
|
|
* nor can the FPGA access the SDRAM during reconfiguration. This driver does
|
|
* not support reconfiguring the ports. The ports are configured by code
|
|
* running out of on chip ram before Linux is started and the configuration
|
|
* is passed in a handoff register in the system manager.
|
|
*
|
|
* This driver supports enabling and disabling of the configured ports, which
|
|
* allows for safe reprogramming of the FPGA, assuming that the new FPGA image
|
|
* uses the same port configuration. Bridges must be disabled before
|
|
* reprogramming the FPGA and re-enabled after the FPGA has been programmed.
|
|
*/
|
|
|
|
#include <linux/fpga/fpga-bridge.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define ALT_SDR_CTL_FPGAPORTRST_OFST 0x80
|
|
#define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK 0x00003fff
|
|
#define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT 0
|
|
#define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT 4
|
|
#define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT 8
|
|
|
|
/*
|
|
* From the Cyclone V HPS Memory Map document:
|
|
* These registers are used to store handoff information between the
|
|
* preloader and the OS. These 8 registers can be used to store any
|
|
* information. The contents of these registers have no impact on
|
|
* the state of the HPS hardware.
|
|
*/
|
|
#define SYSMGR_ISWGRP_HANDOFF3 (0x8C)
|
|
|
|
#define F2S_BRIDGE_NAME "fpga2sdram"
|
|
|
|
struct alt_fpga2sdram_data {
|
|
struct device *dev;
|
|
struct regmap *sdrctl;
|
|
int mask;
|
|
};
|
|
|
|
static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
|
|
{
|
|
struct alt_fpga2sdram_data *priv = bridge->priv;
|
|
int value;
|
|
|
|
regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
|
|
|
|
return (value & priv->mask) == priv->mask;
|
|
}
|
|
|
|
static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
|
|
bool enable)
|
|
{
|
|
return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
|
|
priv->mask, enable ? priv->mask : 0);
|
|
}
|
|
|
|
static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
|
|
{
|
|
return _alt_fpga2sdram_enable_set(bridge->priv, enable);
|
|
}
|
|
|
|
static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
|
|
.enable_set = alt_fpga2sdram_enable_set,
|
|
.enable_show = alt_fpga2sdram_enable_show,
|
|
};
|
|
|
|
static const struct of_device_id altera_fpga_of_match[] = {
|
|
{ .compatible = "altr,socfpga-fpga2sdram-bridge" },
|
|
{},
|
|
};
|
|
|
|
static int alt_fpga_bridge_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct alt_fpga2sdram_data *priv;
|
|
struct fpga_bridge *br;
|
|
u32 enable;
|
|
struct regmap *sysmgr;
|
|
int ret = 0;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->dev = dev;
|
|
|
|
priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
|
|
if (IS_ERR(priv->sdrctl)) {
|
|
dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
|
|
return PTR_ERR(priv->sdrctl);
|
|
}
|
|
|
|
sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
|
|
if (IS_ERR(sysmgr)) {
|
|
dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
|
|
return PTR_ERR(sysmgr);
|
|
}
|
|
|
|
/* Get f2s bridge configuration saved in handoff register */
|
|
regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
|
|
|
|
br = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
|
|
&altera_fpga2sdram_br_ops, priv);
|
|
if (IS_ERR(br))
|
|
return PTR_ERR(br);
|
|
|
|
platform_set_drvdata(pdev, br);
|
|
|
|
dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
|
|
|
|
if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
|
|
if (enable > 1) {
|
|
dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
|
|
} else {
|
|
dev_info(dev, "%s bridge\n",
|
|
(enable ? "enabling" : "disabling"));
|
|
ret = _alt_fpga2sdram_enable_set(priv, enable);
|
|
if (ret) {
|
|
fpga_bridge_unregister(br);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void alt_fpga_bridge_remove(struct platform_device *pdev)
|
|
{
|
|
struct fpga_bridge *br = platform_get_drvdata(pdev);
|
|
|
|
fpga_bridge_unregister(br);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
|
|
|
|
static struct platform_driver altera_fpga_driver = {
|
|
.probe = alt_fpga_bridge_probe,
|
|
.remove_new = alt_fpga_bridge_remove,
|
|
.driver = {
|
|
.name = "altera_fpga2sdram_bridge",
|
|
.of_match_table = of_match_ptr(altera_fpga_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(altera_fpga_driver);
|
|
|
|
MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
|
|
MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
|
|
MODULE_LICENSE("GPL v2");
|