linux/drivers/ata/pata_platform.c
Uwe Kleine-König 2d910fe1e6 ata: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/ata/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

While touching these files, make indention of the struct initializer
consistent in several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241016141609.27329-2-u.kleine-koenig@baylibre.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-10-17 09:55:08 +02:00

239 lines
6.5 KiB
C

/*
* Generic platform device PATA driver
*
* Copyright (C) 2006 - 2007 Paul Mundt
*
* Based on pata_pcmcia:
*
* Copyright 2005-2006 Red Hat Inc, all rights reserved.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#define DRV_NAME "pata_platform"
#define DRV_VERSION "1.2"
static int pio_mask = 1;
module_param(pio_mask, int, 0);
MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default");
/*
* Provide our own set_mode() as we don't want to change anything that has
* already been configured..
*/
static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
ata_for_each_dev(dev, link, ENABLED) {
/* We don't really care */
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
ata_dev_info(dev, "configured for PIO\n");
}
return 0;
}
static const struct scsi_host_template pata_platform_sht = {
ATA_PIO_SHT(DRV_NAME),
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
unsigned int shift)
{
/* Fixup the port shift for platforms that need it */
ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift);
ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift);
ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift);
ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift);
ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift);
ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift);
ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift);
ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift);
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift);
}
/**
* __pata_platform_probe - attach a platform interface
* @dev: device
* @io_res: Resource representing I/O base
* @ctl_res: Resource representing CTL base
* @irq_res: Resource representing IRQ and its flags
* @ioport_shift: I/O port shift
* @__pio_mask: PIO mask
* @sht: scsi_host_template to use when registering
* @use16bit: Flag to indicate 16-bit IO instead of 32-bit
*
* Register a platform bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
*
* Platform devices are expected to contain at least 2 resources per port:
*
* - I/O Base (IORESOURCE_IO or IORESOURCE_MEM)
* - CTL Base (IORESOURCE_IO or IORESOURCE_MEM)
*
* and optionally:
*
* - IRQ (IORESOURCE_IRQ)
*
* If the base resources are both mem types, the ioremap() is handled
* here. For IORESOURCE_IO, it's assumed that there's no remapping
* necessary.
*
* If no IRQ resource is present, PIO polling mode is used instead.
*/
int __pata_platform_probe(struct device *dev, struct resource *io_res,
struct resource *ctl_res, struct resource *irq_res,
unsigned int ioport_shift, int __pio_mask,
const struct scsi_host_template *sht, bool use16bit)
{
struct ata_host *host;
struct ata_port *ap;
unsigned int mmio;
int irq = 0;
int irq_flags = 0;
/*
* Check for MMIO
*/
mmio = (( io_res->flags == IORESOURCE_MEM) &&
(ctl_res->flags == IORESOURCE_MEM));
/*
* And the IRQ
*/
if (irq_res && irq_res->start > 0) {
irq = irq_res->start;
irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
}
/*
* Now that that's out of the way, wire up the port..
*/
host = ata_host_alloc(dev, 1);
if (!host)
return -ENOMEM;
ap = host->ports[0];
ap->ops = devm_kzalloc(dev, sizeof(*ap->ops), GFP_KERNEL);
if (!ap->ops)
return -ENOMEM;
ap->ops->inherits = &ata_sff_port_ops;
ap->ops->cable_detect = ata_cable_unknown;
ap->ops->set_mode = pata_platform_set_mode;
if (use16bit)
ap->ops->sff_data_xfer = ata_sff_data_xfer;
else
ap->ops->sff_data_xfer = ata_sff_data_xfer32;
ap->pio_mask = __pio_mask;
ap->flags |= ATA_FLAG_SLAVE_POSS;
/*
* Use polling mode if there's no IRQ
*/
if (!irq) {
ap->flags |= ATA_FLAG_PIO_POLLING;
ata_port_desc(ap, "no IRQ, using PIO polling");
}
/*
* Handle the MMIO case
*/
if (mmio) {
ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
resource_size(io_res));
ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
resource_size(ctl_res));
} else {
ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
resource_size(io_res));
ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
resource_size(ctl_res));
}
if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
dev_err(dev, "failed to map IO/CTL base\n");
return -ENOMEM;
}
ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
pata_platform_setup_port(&ap->ioaddr, ioport_shift);
ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
(unsigned long long)io_res->start,
(unsigned long long)ctl_res->start);
/* activate */
return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
irq_flags, sht);
}
EXPORT_SYMBOL_GPL(__pata_platform_probe);
static int pata_platform_probe(struct platform_device *pdev)
{
struct resource *io_res;
struct resource *ctl_res;
struct resource *irq_res;
struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev);
/*
* Simple resource validation ..
*/
if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
dev_err(&pdev->dev, "invalid number of resources\n");
return -EINVAL;
}
/*
* Get the I/O base first
*/
io_res = platform_get_mem_or_io(pdev, 0);
if (!io_res)
return -EINVAL;
/*
* Then the CTL base
*/
ctl_res = platform_get_mem_or_io(pdev, 1);
if (!ctl_res)
return -EINVAL;
/*
* And the IRQ
*/
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
pp_info ? pp_info->ioport_shift : 0,
pio_mask, &pata_platform_sht, false);
}
static struct platform_driver pata_platform_driver = {
.probe = pata_platform_probe,
.remove = ata_platform_remove_one,
.driver = {
.name = DRV_NAME,
},
};
module_platform_driver(pata_platform_driver);
MODULE_AUTHOR("Paul Mundt");
MODULE_DESCRIPTION("low-level driver for platform device ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_NAME);