mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:46:16 +00:00
6861eaf791
* Small cleanup of the pata_octeon driver to drop a useless platform callback, from Uwe. * Simplify ata_scsi_cmd_error_handler() code using the fact that ap->ops->error_handler is NULL most of the time, from Wenchao. * Several patches improving libata error handling. This is in preparation for supporting the command duration limits (CDL) feature. The changes allow handling corner cases of ATA NCQ errors which do not happen with regular drives but will be triggered with CDL drives. From Niklas. * Simplify the qc_fill_rtf operation, from me. * Improve SCSI command translation for the REPORT_SUPPORTED_OPERATION_CODES command, from me. * Cleanup of libata FUA handling. This falls short of enabling FUA for ATA drives that support it by default as there were concerns that old drives would break. The series howeverfixes several issues with the FUA support to ensure that FUA is reported as being supported only for drives that can handle all possible write cases (NCQ and non-NCQ). A check in the block layer is also added to ensure that we never see read FUA commands (current behavior). From me. * Several patches to move the old PARIDE (parallel port IDE) driver to libata as pata_parport. Given that this driver also needs protocol modules, the driver code resides in its own pata_parport directoy under drivers/ata. From Ondrej. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY/VTnQAKCRDdoc3SxdoY dk77AQCA1frczKhcOFe2PK/FsFAiO9Nlx/snk7V95JdjVG8GlwEAkey7mvbXMfX0 fDbqpaCkWFb6SvwxdMSATlqUvwEpSQ8= =tqQP -----END PGP SIGNATURE----- Merge tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA updates from Damien Le Moal: - Small cleanup of the pata_octeon driver to drop a useless platform callback (Uwe) - Simplify ata_scsi_cmd_error_handler() code using the fact that ap->ops->error_handler is NULL most of the time (Wenchao) - Several patches improving libata error handling. This is in preparation for supporting the command duration limits (CDL) feature. The changes allow handling corner cases of ATA NCQ errors which do not happen with regular drives but will be triggered with CDL drives (Niklas) - Simplify the qc_fill_rtf operation (me) - Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES command (me) - Cleanup of libata FUA handling. This falls short of enabling FUA for ATA drives that support it by default as there were concerns that old drives would break. The series however fixes several issues with the FUA support to ensure that FUA is reported as being supported only for drives that can handle all possible write cases (NCQ and non-NCQ). A check in the block layer is also added to ensure that we never see read FUA commands (current behavior) (me) - Several patches to move the old PARIDE (parallel port IDE) driver to libata as pata_parport. Given that this driver also needs protocol modules, the driver code resides in its own pata_parport directoy under drivers/ata (Ondrej) * tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: Fix ida_alloc return value error check drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport drivers/block: Remove PARIDE core and high-level protocols ata: pata_parport: add driver (PARIDE replacement) ata: libata: exclude FUA support for known buggy drives ata: libata: Fix FUA handling in ata_build_rw_tf() ata: libata: cleanup fua support detection ata: libata: Rename and cleanup ata_rwcmd_protocol() ata: libata: Introduce ata_ncq_supported() block: add a sanity check for non-write flush/fua bios ata: libata-scsi: improve ata_scsiop_maint_in() ata: libata-scsi: do not overwrite SCSI ML and status bytes ata: libata: move NCQ related ATA_DFLAGs ata: libata: respect successfully completed commands during errors ata: libata: read the shared status for successful NCQ commands once ata: libata: simplify qc_fill_rtf port operation interface ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH ata: libata-eh: Cleanup ata_scsi_cmd_error_handler() ata: octeon: Drop empty platform remove function
132 lines
5.4 KiB
Makefile
132 lines
5.4 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
obj-$(CONFIG_ATA) += libata.o
|
|
|
|
# non-SFF interface
|
|
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
|
|
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
|
|
obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
|
|
obj-$(CONFIG_SATA_GEMINI) += sata_gemini.o
|
|
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
|
|
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
|
|
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
|
|
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
|
|
obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_DWC) += ahci_dwc.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_MTK) += ahci_mtk.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_OCTEON) += ahci_octeon.o
|
|
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o
|
|
obj-$(CONFIG_AHCI_QORIQ) += ahci_qoriq.o libahci.o libahci_platform.o
|
|
|
|
# SFF w/ custom DMA
|
|
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
|
|
obj-$(CONFIG_PATA_ARASAN_CF) += pata_arasan_cf.o
|
|
obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
|
|
obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
|
|
obj-$(CONFIG_SATA_SX4) += sata_sx4.o
|
|
|
|
# SFF SATA w/ BMDMA
|
|
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
|
|
obj-$(CONFIG_SATA_MV) += sata_mv.o
|
|
obj-$(CONFIG_SATA_NV) += sata_nv.o
|
|
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
|
|
obj-$(CONFIG_SATA_RCAR) += sata_rcar.o
|
|
obj-$(CONFIG_SATA_SIL) += sata_sil.o
|
|
obj-$(CONFIG_SATA_SIS) += sata_sis.o
|
|
obj-$(CONFIG_SATA_SVW) += sata_svw.o
|
|
obj-$(CONFIG_SATA_ULI) += sata_uli.o
|
|
obj-$(CONFIG_SATA_VIA) += sata_via.o
|
|
obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
|
|
|
|
# SFF PATA w/ BMDMA
|
|
obj-$(CONFIG_PATA_ALI) += pata_ali.o
|
|
obj-$(CONFIG_PATA_AMD) += pata_amd.o
|
|
obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
|
|
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
|
|
obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
|
|
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
|
|
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
|
|
obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
|
|
obj-$(CONFIG_PATA_CS5535) += pata_cs5535.o
|
|
obj-$(CONFIG_PATA_CS5536) += pata_cs5536.o
|
|
obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o
|
|
obj-$(CONFIG_PATA_EFAR) += pata_efar.o
|
|
obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o
|
|
obj-$(CONFIG_PATA_FTIDE010) += pata_ftide010.o
|
|
obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o
|
|
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
|
|
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
|
|
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
|
|
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
|
|
obj-$(CONFIG_PATA_IMX) += pata_imx.o
|
|
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
|
|
obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
|
|
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
|
|
obj-$(CONFIG_PATA_MACIO) += pata_macio.o
|
|
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
|
|
obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
|
|
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
|
|
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
|
|
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
|
|
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
|
|
obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
|
|
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
|
|
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
|
|
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
|
|
obj-$(CONFIG_PATA_RDC) += pata_rdc.o
|
|
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
|
|
obj-$(CONFIG_PATA_SCH) += pata_sch.o
|
|
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
|
|
obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
|
|
obj-$(CONFIG_PATA_SIS) += pata_sis.o
|
|
obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
|
|
obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
|
|
obj-$(CONFIG_PATA_VIA) += pata_via.o
|
|
obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
|
|
|
|
# SFF PIO only
|
|
obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
|
|
obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
|
|
obj-$(CONFIG_PATA_GAYLE) += pata_gayle.o
|
|
obj-$(CONFIG_PATA_BUDDHA) += pata_buddha.o
|
|
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
|
|
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
|
|
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
|
|
obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
|
|
obj-$(CONFIG_PATA_OPTI) += pata_opti.o
|
|
obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
|
|
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
|
|
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
|
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
|
|
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
|
|
|
|
obj-$(CONFIG_PATA_PXA) += pata_pxa.o
|
|
|
|
obj-$(CONFIG_PATA_PARPORT) += pata_parport/
|
|
|
|
# Should be last but two libata driver
|
|
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
|
|
# Should be last but one libata driver
|
|
obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
|
|
# Should be last libata driver
|
|
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
|
|
|
|
libata-y := libata-core.o libata-scsi.o libata-eh.o \
|
|
libata-transport.o libata-trace.o
|
|
libata-$(CONFIG_SATA_HOST) += libata-sata.o
|
|
libata-$(CONFIG_ATA_SFF) += libata-sff.o
|
|
libata-$(CONFIG_SATA_PMP) += libata-pmp.o
|
|
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
|
|
libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o
|
|
libata-$(CONFIG_PATA_TIMINGS) += libata-pata-timings.o
|