Fixes for v6.12
Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
GPU:
- a7xx: add a fence wait before SMMU table update
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsp3Zbd_H3FhHdRz9yCYA4wxX4SenpYRSk=Mx2d8GMSuQ@mail.gmail.com
lru_gen_shrink_node() unconditionally clears kswapd_failures, which can
prevent kswapd from sleeping and cause 100% kswapd cpu usage even when
kswapd repeatedly fails to make progress in reclaim.
Only clear kswap_failures in lru_gen_shrink_node() if reclaim makes some
progress, similar to shrink_node().
I happened to run into this problem in one of my tests recently. It
requires a combination of several conditions: The allocator needs to
allocate a right amount of pages such that it can wake up kswapd
without itself being OOM killed; there is no memory for kswapd to
reclaim (My test disables swap and cleans page cache first); no other
process frees enough memory at the same time.
Link: https://lkml.kernel.org/r/20241014221211.832591-1-weixugc@google.com
Fixes: e4dde56cd2 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Wei Xu <weixugc@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens <heftig@archlinux.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes: 0fe6e20b9c ("hugetlb, rmap: add reverse mapping for hugepage")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mount option of tmpfs should be huge=advise, not madvise which is not
supported and may mislead the users.
Link: https://lkml.kernel.org/r/20241015020257.139235-1-sunnanyong@huawei.com
Fixes: 1b03d0d558 ("selftests/vm: add thp collapse file and tmpfs testing")
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add myself as a reviewer for memory mapping / VMA code. I will probably
only reply to patches sporadically, but hopefully this will help me keep
up with changes that look interesting security-wise.
Link: https://lkml.kernel.org/r/20241014-maintainers-mmap-reviewer-v1-1-50dce0514752@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A report [1] was uploaded from syzbot.
In the previous commit 862590ac37 ("mm: swap: allow cache reclaim to
skip slot cache"), the __try_to_reclaim_swap() function reads offset and
folio->entry from folio without folio_lock protection.
In the currently reported KCSAN log, it is assumed that the actual
data-race will not occur because the calltrace that does WRITE already
obtains the folio_lock and then writes.
However, the existing __try_to_reclaim_swap() function was already
implemented to perform reads under folio_lock protection [1], and there is
a risk of a data-race occurring through a function other than the one
shown in the KCSAN log.
Therefore, I think it is appropriate to change
read operations for folio to be performed under folio_lock.
[1]
==================================================================
BUG: KCSAN: data-race in __delete_from_swap_cache / __try_to_reclaim_swap
write to 0xffffea0004c90328 of 8 bytes by task 5186 on cpu 0:
__delete_from_swap_cache+0x1f0/0x290 mm/swap_state.c:163
delete_from_swap_cache+0x72/0xe0 mm/swap_state.c:243
folio_free_swap+0x1d8/0x1f0 mm/swapfile.c:1850
free_swap_cache mm/swap_state.c:293 [inline]
free_pages_and_swap_cache+0x1fc/0x410 mm/swap_state.c:325
__tlb_batch_free_encoded_pages mm/mmu_gather.c:136 [inline]
tlb_batch_pages_flush mm/mmu_gather.c:149 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:366 [inline]
tlb_flush_mmu+0x2cf/0x440 mm/mmu_gather.c:373
zap_pte_range mm/memory.c:1700 [inline]
zap_pmd_range mm/memory.c:1739 [inline]
zap_pud_range mm/memory.c:1768 [inline]
zap_p4d_range mm/memory.c:1789 [inline]
unmap_page_range+0x1f3c/0x22d0 mm/memory.c:1810
unmap_single_vma+0x142/0x1d0 mm/memory.c:1856
unmap_vmas+0x18d/0x2b0 mm/memory.c:1900
exit_mmap+0x18a/0x690 mm/mmap.c:1864
__mmput+0x28/0x1b0 kernel/fork.c:1347
mmput+0x4c/0x60 kernel/fork.c:1369
exit_mm+0xe4/0x190 kernel/exit.c:571
do_exit+0x55e/0x17f0 kernel/exit.c:926
do_group_exit+0x102/0x150 kernel/exit.c:1088
get_signal+0xf2a/0x1070 kernel/signal.c:2917
arch_do_signal_or_restart+0x95/0x4b0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x59/0x130 kernel/entry/common.c:218
do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffffea0004c90328 of 8 bytes by task 5189 on cpu 1:
__try_to_reclaim_swap+0x9d/0x510 mm/swapfile.c:198
free_swap_and_cache_nr+0x45d/0x8a0 mm/swapfile.c:1915
zap_pte_range mm/memory.c:1656 [inline]
zap_pmd_range mm/memory.c:1739 [inline]
zap_pud_range mm/memory.c:1768 [inline]
zap_p4d_range mm/memory.c:1789 [inline]
unmap_page_range+0xcf8/0x22d0 mm/memory.c:1810
unmap_single_vma+0x142/0x1d0 mm/memory.c:1856
unmap_vmas+0x18d/0x2b0 mm/memory.c:1900
exit_mmap+0x18a/0x690 mm/mmap.c:1864
__mmput+0x28/0x1b0 kernel/fork.c:1347
mmput+0x4c/0x60 kernel/fork.c:1369
exit_mm+0xe4/0x190 kernel/exit.c:571
do_exit+0x55e/0x17f0 kernel/exit.c:926
__do_sys_exit kernel/exit.c:1055 [inline]
__se_sys_exit kernel/exit.c:1053 [inline]
__x64_sys_exit+0x1f/0x20 kernel/exit.c:1053
x64_sys_call+0x2d46/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:61
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000242 -> 0x0000000000000000
Link: https://lkml.kernel.org/r/20241007070623.23340-1-aha310510@gmail.com
Reported-by: syzbot+fa43f1b63e3aa6f66329@syzkaller.appspotmail.com
Fixes: 862590ac37 ("mm: swap: allow cache reclaim to skip slot cache")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Khugepaged already supports collapsing file large folios (including shmem
mTHP) by commit 7de856ffd0 ("mm: khugepaged: support shmem mTHP
collapse"), and the control parameters in khugepaged:
'khugepaged_max_ptes_swap' and 'khugepaged_max_ptes_none', still compare
based on PTE granularity to determine whether a file collapse is needed.
However, the statistics for 'present' and 'swap' in
hpage_collapse_scan_file() do not take into account the large folios,
which may lead to incorrect judgments regarding the
khugepaged_max_ptes_swap/none parameters, resulting in unnecessary file
collapses.
To fix this issue, take into account the large folios' statistics for
'present' and 'swap' variables in the hpage_collapse_scan_file().
Link: https://lkml.kernel.org/r/c76305d96d12d030a1a346b50503d148364246d2.1728901391.git.baolin.wang@linux.alibaba.com
Fixes: 7de856ffd0 ("mm: khugepaged: support shmem mTHP collapse")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add links to the Bugzilla component that's used to track KASAN and KCOV
issues.
Link: https://lkml.kernel.org/r/20241012225524.117871-1-andrey.konovalov@linux.dev
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We (or rather, readahead logic :) ) might be allocating a THP in the
pagecache and then try mapping it into a process that explicitly disabled
THP: we might end up installing PMD mappings.
This is a problem for s390x KVM, which explicitly remaps all PMD-mapped
THPs to be PTE-mapped in s390_enable_sie()->thp_split_mm(), before
starting the VM.
For example, starting a VM backed on a file system with large folios
supported makes the VM crash when the VM tries accessing such a mapping
using KVM.
Is it also a problem when the HW disabled THP using
TRANSPARENT_HUGEPAGE_UNSUPPORTED? At least on x86 this would be the case
without X86_FEATURE_PSE.
In the future, we might be able to do better on s390x and only disallow
PMD mappings -- what s390x and likely TRANSPARENT_HUGEPAGE_UNSUPPORTED
really wants. For now, fix it by essentially performing the same check as
would be done in __thp_vma_allowable_orders() or in shmem code, where this
works as expected, and disallow PMD mappings, making us fallback to PTE
mappings.
Link: https://lkml.kernel.org/r/20241011102445.934409-3-david@redhat.com
Fixes: 793917d997 ("mm/readahead: Add large folio readahead")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: don't install PMD mappings when THPs are disabled by the
hw/process/vma".
During testing, it was found that we can get PMD mappings in processes
where THP (and more precisely, PMD mappings) are supposed to be disabled.
While it works as expected for anon+shmem, the pagecache is the
problematic bit.
For s390 KVM this currently means that a VM backed by a file located on
filesystem with large folio support can crash when KVM tries accessing the
problematic page, because the readahead logic might decide to use a
PMD-sized THP and faulting it into the page tables will install a PMD
mapping, something that s390 KVM cannot tolerate.
This might also be a problem with HW that does not support PMD mappings,
but I did not try reproducing it.
Fix it by respecting the ways to disable THPs when deciding whether we can
install a PMD mapping. khugepaged should already be taking care of not
collapsing if THPs are effectively disabled for the hw/process/vma.
This patch (of 2):
Add vma_thp_disabled() and thp_disabled_by_hw() helpers to be shared by
shmem_allowable_huge_orders() and __thp_vma_allowable_orders().
[david@redhat.com: rename to vma_thp_disabled(), split out thp_disabled_by_hw() ]
Link: https://lkml.kernel.org/r/20241011102445.934409-2-david@redhat.com
Fixes: 793917d997 ("mm/readahead: Add large folio readahead")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Boqiao Fu <bfu@redhat.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Docs/damon/maintainer-profile: a couple of minor hotfixes".
DAMON maintainer-profile.rst file patches[1] that were merged into the
v6.12-rc1 have a couple of minor mistakes. Fix those.
[1] https://lore.kernel.org/20240826015741.80707-1-sj@kernel.org
This patch (of 2):
Links to external web pages on DAMON's maintainer-profile.rst are missing
'_' suffixes. As a result, rendered document is having only verbose URLs
that cannot be clicked. Fix those.
Also, update the link texts for git trees to contain the names of the
trees, for better readability and avoiding below Sphinx warning.
maintainer-profile.rst:4: WARNING: Duplicate explicit target name: "tree".
Link: https://lkml.kernel.org/r/20241011170154.70651-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241011170154.70651-2-sj@kernel.org
Fixes: 2e9b3d6e2e ("Docs/damon/maintainer-profile: add links in place")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is possible for a bulk operation (MA_STATE_BULK is set) to enter the
new_end < mt_min_slots[type] case and set wr_rebalance as a store type.
This is incorrect as bulk stores do not rebalance per write, but rather
after the all of the writes are done through the mas_bulk_rebalance()
path. Therefore, add a check to make sure MA_STATE_BULK is not set before
we return wr_rebalance as the store type.
Also add a test to make sure wr_rebalance is never the store type when
doing bulk operations via mas_expected_entries()
This is a hotfix for this rc however it has no userspace effects as there
are no users of the bulk insertion mode.
Link: https://lkml.kernel.org/r/20241011214451.7286-1-sidhartha.kumar@oracle.com
Fixes: 5d659bbb52 ("maple_tree: introduce mas_wr_store_type()")
Suggested-by: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Sidhartha <sidhartha.kumar@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "addr" and "is_shmem" arguments have different order in TP_PROTO and
TP_ARGS. This resulted in the incorrect trace result:
text-hugepage-644429 [276] 392092.878683: mm_khugepaged_collapse_file:
mm=0xffff20025d52c440, hpage_pfn=0x200678c00, index=512, addr=1, is_shmem=0,
filename=text-hugepage, nr=512, result=failed
The value of "addr" is wrong because it was treated as bool value, the
type of is_shmem.
Fix the order in TP_PROTO to keep "addr" is before "is_shmem" since the
original patch review suggested this order to achieve best packing.
And use "lx" for "addr" instead of "ld" in TP_printk because address is
typically shown in hex.
After the fix, the trace result looks correct:
text-hugepage-7291 [004] 128.627251: mm_khugepaged_collapse_file:
mm=0xffff0001328f9500, hpage_pfn=0x20016ea00, index=512, addr=0x400000,
is_shmem=0, filename=text-hugepage, nr=512, result=failed
Link: https://lkml.kernel.org/r/20241012011702.1084846-1-yang@os.amperecomputing.com
Fixes: 4c9473e87e ("mm/khugepaged: add tracepoint to collapse_file()")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Gautam Menghani <gautammenghani201@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When can_swapin_thp() is unused, it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y:
mm/memory.c:4184:20: error: unused function 'can_swapin_thp' [-Werror,-Wunused-function]
Fix this by removing the unused stub.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Link: https://lkml.kernel.org/r/20241008191329.2332346-1-andriy.shevchenko@linux.intel.com
Fixes: 242d12c981 ("mm: support large folios swap-in for sync io devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my outdated addresses within mailmap.
Link: https://lkml.kernel.org/r/20241009144934.43027-1-andybnac@gmail.com
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Leon Chien <leonchien@synology.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add myself and Liam as co-maintainers of the memory mapping and VMA code
alongside Andrew as we are heavily involved in its implementation and
maintenance.
Link: https://lkml.kernel.org/r/20241009201032.6130-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
show show_smap_vma_flags() has been a using misspelled initializer in
mnemonics[] - it needed to initialize 2 element array of char and it used
NUL-padded 2 character string literals (i.e. 3-element initializer).
This has been spotted by gcc-15[*]; prior to that gcc quietly dropped the
3rd eleemnt of initializers. To fix this we are increasing the size of
mnemonics[] (from mnemonics[BITS_PER_LONG][2] to
mnemonics[BITS_PER_LONG][3]) to accomodate the NUL-padded string literals.
This also helps us in simplyfying the logic for printing of the flags as
instead of printing each character from the mnemonics[], we can just print
the mnemonics[] using seq_printf.
[*]: fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
917 | [0 ... (BITS_PER_LONG-1)] = "??",
| ^~~~
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
...
Stephen pointed out:
: The C standard explicitly allows for a string initializer to be too long
: due to the NUL byte at the end ... so this warning may be overzealous.
but let's make the warning go away anwyay.
Link: https://lkml.kernel.org/r/20241005063700.2241027-1-brahmajit.xyz@gmail.com
Link: https://lkml.kernel.org/r/20241003093040.47c08382@canb.auug.org.au
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In mremap(), move_page_tables() looks at the type of the PMD entry and the
specified address range to figure out by which method the next chunk of
page table entries should be moved.
At that point, the mmap_lock is held in write mode, but no rmap locks are
held yet. For PMD entries that point to page tables and are fully covered
by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called,
which first takes rmap locks, then does move_normal_pmd().
move_normal_pmd() takes the necessary page table locks at source and
destination, then moves an entire page table from the source to the
destination.
The problem is: The rmap locks, which protect against concurrent page
table removal by retract_page_tables() in the THP code, are only taken
after the PMD entry has been read and it has been decided how to move it.
So we can race as follows (with two processes that have mappings of the
same tmpfs file that is stored on a tmpfs mount with huge=advise); note
that process A accesses page tables through the MM while process B does it
through the file rmap:
process A process B
========= =========
mremap
mremap_to
move_vma
move_page_tables
get_old_pmd
alloc_new_pmd
*** PREEMPT ***
madvise(MADV_COLLAPSE)
do_madvise
madvise_walk_vmas
madvise_vma_behavior
madvise_collapse
hpage_collapse_scan_file
collapse_file
retract_page_tables
i_mmap_lock_read(mapping)
pmdp_collapse_flush
i_mmap_unlock_read(mapping)
move_pgt_entry(NORMAL_PMD, ...)
take_rmap_locks
move_normal_pmd
drop_rmap_locks
When this happens, move_normal_pmd() can end up creating bogus PMD entries
in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect
depends on arch-specific and machine-specific details; on x86, you can end
up with physical page 0 mapped as a page table, which is likely
exploitable for user->kernel privilege escalation.
Fix the race by letting process B recheck that the PMD still points to a
page table after the rmap locks have been taken. Otherwise, we bail and
let the caller fall back to the PTE-level copying path, which will then
bail immediately at the pmd_none() check.
Bug reachability: Reaching this bug requires that you can create
shmem/file THP mappings - anonymous THP uses different code that doesn't
zap stuff under rmap locks. File THP is gated on an experimental config
flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need
shmem THP to hit this bug. As far as I know, getting shmem THP normally
requires that you can mount your own tmpfs with the right mount flags,
which would require creating your own user+mount namespace; though I don't
know if some distros maybe enable shmem THP by default or something like
that.
Bug impact: This issue can likely be used for user->kernel privilege
escalation when it is reachable.
Link: https://lkml.kernel.org/r/20241007-move_normal_pmd-vs-collapse-fix-2-v1-1-5ead9631f2ea@google.com
Fixes: 1d65b771bc ("mm/khugepaged: retract_page_tables() without mmap or vma lock")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Closes: https://project-zero.issues.chromium.org/371047675
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arnd reported a build failure due to the BUILD_BUG_ON() statement in
alloc_kmem_cache_cpus(). The test
PERCPU_DYNAMIC_EARLY_SIZE < NR_KMALLOC_TYPES * KMALLOC_SHIFT_HIGH * sizeof(struct kmem_cache_cpu)
The factors that increase the right side of the equation:
- PAGE_SIZE > 4KiB increases KMALLOC_SHIFT_HIGH
- For the local_lock_t in kmem_cache_cpu:
- PREEMPT_RT adds an actual lock.
- LOCKDEP increases the size of the lock.
- LOCK_STAT adds additional bytes plus padding to the lockdep
structure.
The net difference with and without PREEMPT_RT is 88 bytes for the
lock_lock_t, 96 bytes for kmem_cache_cpu due to additional padding. This
is enough to exceed the 80KiB limit with 16KiB page size - the 8KiB page
size is fine.
Increase PERCPU_DYNAMIC_SIZE_SHIFT to 13 on configs with PAGE_SIZE larger
than 4KiB and LOCKDEP enabled.
Link: https://lkml.kernel.org/r/20241007143049.gyMpEu89@linutronix.de
Fixes: d8fccd9ca5 ("arm64: Allow to enable PREEMPT_RT.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410020326.iaZIteIx-lkp@intel.com/
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/20241004095702.637528-1-arnd@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On Android with arm, there is some synchronization needed to avoid a
deadlock when forking after pthread_create.
Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com
Fixes: cff2945827 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: fix deadlock after pthread_create".
On Android arm, pthread_create followed by a fork caused a deadlock in the
case where the fork required work to be completed by the created thread.
Update the synchronization primitive to use pthread_barrier instead of
atomic_bool.
Apply the same fix to the wp-fork-with-event test.
This patch (of 2):
Swap synchronization primitive with pthread_barrier, so that stdatomic.h
does not need to be included.
The synchronization is needed on Android ARM64; we see a deadlock with
pthread_create when the parent thread races forward before the child has a
chance to start doing work.
Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com
Fixes: cff2945827 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reported that a task hang occurs in vcs_open() during a fuzzing
test for nilfs2.
The root cause of this problem is that in nilfs_find_entry(), which
searches for directory entries, ignores errors when loading a directory
page/folio via nilfs_get_folio() fails.
If the filesystem images is corrupted, and the i_size of the directory
inode is large, and the directory page/folio is successfully read but
fails the sanity check, for example when it is zero-filled,
nilfs_check_folio() may continue to spit out error messages in bursts.
Fix this issue by propagating the error to the callers when loading a
page/folio fails in nilfs_find_entry().
The current interface of nilfs_find_entry() and its callers is outdated
and cannot propagate error codes such as -EIO and -ENOMEM returned via
nilfs_find_entry(), so fix it together.
Link: https://lkml.kernel.org/r/20241004033640.6841-1-konishi.ryusuke@gmail.com
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Closes: https://lkml.kernel.org/r/20240927013806.3577931-1-lizhi.xu@windriver.com
Reported-by: syzbot+8a192e8d090fa9a31135@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a192e8d090fa9a31135
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit f8d112a4e6 ("mm/mmap: avoid zeroing vma tree in mmap_region()")
changed how error handling is performed in mmap_region().
The error value defaults to -ENOMEM, but then gets reassigned immediately
to the result of vms_gather_munmap_vmas() if we are performing a MAP_FIXED
mapping over existing VMAs (and thus unmapping them).
This overwrites the error value, potentially clearing it.
After this, we invoke may_expand_vm() and possibly vm_area_alloc(), and
check to see if they failed. If they do so, then we perform error-handling
logic, but importantly, we do NOT update the error code.
This means that, if vms_gather_munmap_vmas() succeeds, but one of these
calls does not, the function will return indicating no error, but rather an
address value of zero, which is entirely incorrect.
Correct this and avoid future confusion by strictly setting error on each
and every occasion we jump to the error handling logic, and set the error
code immediately prior to doing so.
This way we can see at a glance that the error code is always correct.
Many thanks to Vegard Nossum who spotted this issue in discussion around
this problem.
Link: https://lkml.kernel.org/r/20241002073932.13482-1-lorenzo.stoakes@oracle.com
Fixes: f8d112a4e6 ("mm/mmap: avoid zeroing vma tree in mmap_region()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Do not keep the obsolete EDID around after unplugging the display
from the connector.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d20c2f8464 ("drm/ast: sil164: Transparently handle BMC support")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015065113.11790-2-tzimmermann@suse.de
This reverts commit 6c9e14ee9f.
This reverts commit d5070c9b29.
This reverts commit 89c6ea2006.
The VLINE interrupt doesn't work correctly on G200SE-A (at least). We
have also seen missing interrupts on G200ER. So revert vblank support.
Fixes frozen displays and warnings about missed vblanks.
[ 33.818362] [CRTC:34:crtc-0] vblank wait timed out
From the vblank code, the driver only keeps the register constants and
the line that disables all interrupts in mgag200_device_init(). Both
is still useful without vblank handling.
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/dri-devel/Zvx6lSi7oq5xvTZb@agluck-desk3.sc.intel.com/raw
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015063932.8620-1-tzimmermann@suse.de
Treat each completed full size write to /dev/ttyDBC0 as a separate usb
transfer. Make sure the size of the TRBs matches the size of the tty
write by first queuing as many max packet size TRBs as possible up to
the last TRB which will be cut short to match the size of the tty write.
This solves an issue where userspace writes several transfers back to
back via /dev/ttyDBC0 into a kfifo before dbgtty can find available
request to turn that kfifo data into TRBs on the transfer ring.
The boundary between transfer was lost as xhci-dbgtty then turned
everyting in the kfifo into as many 'max packet size' TRBs as possible.
DbC would then send more data to the host than intended for that
transfer, causing host to issue a babble error.
Refuse to write more data to kfifo until previous tty write data is
turned into properly sized TRBs with data size boundaries matching tty
write size
Tested-by: Uday M Bhat <uday.m.bhat@intel.com>
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some host controllers fail to produce the final completion event on an
isochronous TD which experienced an error mid TD. We deal with it by
flagging such TDs and checking if the next event points at the flagged
TD or at the next one, and giving back the flagged TD if the latter.
This is not enough, because the next TD may be missed by the xHC. Or
there may be no next TD but a ring underrun. We also need to get such
TD quickly out of the way, or errors on later TDs may be handled wrong.
If the next TD experiences a Missed Service Error, we will set the skip
flag on the endpoint and then attempt skipping TDs when yet another
event arrives. In such scenario, we ought to report the 'error mid TD'
transfer as such rather than skip it.
Another problem case are Stopped events. If we see one after an error
mid TD, we naively assume that it's a Force Stopped Event because it
doesn't match the pending TD, but in reality it might be an ordinary
Stopped event for the next TD, which we fail to recognize and handle.
Fix this by moving error mid TD handling before the whole TD skipping
loop. Remove unnecessary conditions, always give back the TD if the new
event points to any TRB outside it or if the pointer is NULL, as may be
the case in Ring Underrun and Overrun events on 1st gen hardware. Only
if the pending TD isn't flagged, consider other actions like skipping.
As a side effect of reordering with skip and FSE cases, error mid TD is
reordered with last_td_was_short check. This is harmless, because the
two cases are mutually exclusive - only one can happen in any given run
of handle_tx_event().
Tested on the NEC host and a USB camera with flaky cable. Dynamic debug
confirmed that Transaction Errors are sometimes seen, sometimes mid-TD,
sometimes followed by Missed Service. In such cases, they were finished
properly before skipping began.
[Rebase on 6.12-rc1 -Mathias]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid xHC host from processing a cancelled URB by always turning
cancelled URB TDs into no-op TRBs before queuing a 'Set TR Deq' command.
If the command fails then xHC will start processing the cancelled TD
instead of skipping it once endpoint is restarted, causing issues like
Babble error.
This is not a complete solution as a failed 'Set TR Deq' command does not
guarantee xHC TRB caches are cleared.
Fixes: 4db356924a ("xhci: turn cancelled td cleanup to its own function")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stream contex type (SCT) bitfield is used both in the stream context
data structure, and in the 'Set TR Dequeue pointer' command TRB.
In both cases it uses bits 3:1
The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field
for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value
1 bit left before masking the three bits.
Fix this by first masking and rshifting, just like the similar
SCT_FOR_CTX(p) macro does
This issue has not been visibile as the lost bit 3 is only used with
secondary stream arrays (SSA). Xhci driver currently only supports using
a primary stream array with Linear stream addressing.
Fixes: 95241dbdf8 ("xhci: Set SCT field for Set TR dequeue on streams")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer has been encountering "task hung" problems ever
since the dummy-hcd driver was changed to use hrtimers instead of
regular timers. It turns out that the problems are caused by a subtle
difference between the timer_pending() and hrtimer_active() APIs.
The changeover blindly replaced the first by the second. However,
timer_pending() returns True when the timer is queued but not when its
callback is running, whereas hrtimer_active() returns True when the
hrtimer is queued _or_ its callback is running. This difference
occasionally caused dummy_urb_enqueue() to think that the callback
routine had not yet started when in fact it was almost finished. As a
result the hrtimer was not restarted, which made it impossible for the
driver to dequeue later the URB that was just enqueued. This caused
usb_kill_urb() to hang, and things got worse from there.
Since hrtimers have no API for telling when they are queued and the
callback isn't running, the driver must keep track of this for itself.
That's what this patch does, adding a new "timer_pending" flag and
setting or clearing it at the appropriate times.
Reported-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@google.com/
Tested-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: a7f3813e58 ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 160c826b4d ("selftest: hid: add missing run-hid-tools-tests.sh")
has added the run-hid-tools-tests.sh script for it to be installed, but
I forgot to add the tests directory together.
If running the test case without the tests directory, will results in
the following error message:
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -t hid:hid-core.sh
/usr/lib/python3.11/site-packages/_pytest/config/__init__.py:331: PluggyTeardownRaisedWarning: A plugin raised an exception during an old-style hookwrapper teardown.
Plugin: helpconfig, Hook: pytest_cmdline_parse
UsageError: usage: __main__.py [options] [file_or_dir] [file_or_dir] [...]
__main__.py: error: unrecognized arguments: --udevd
inifile: None
rootdir: /root/linux/kselftest_install/hid
In fact, the run-hid-tools-tests.sh script uses the scripts in the tests
directory to run tests. The tests directory also needs to be added to be
installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Cc: stable@vger.kernel.org
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Several miscellaneous fixes:
- Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref, soft
lockups, error unwinding and some small functional issues
- Error unwind bug in rdma netlink
- Two issues with incorrect VLAN detection for iWarp
- skb_splice_from_iter() splat in siw
- Give SRP slab caches unique names to resolve the merge window WARN_ON
regression
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZw/9ZAAKCRCFwuHvBreF
Yez7AQCAcC4NB1HYMnYiFIn9GPtxVaqTt+VOIK9h/5mIMGDGMAD8DX+3sOqBLlDX
ZLi/2Se8gej+yoWRqSskrc2Pv2Mfoww=
=ryK4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several miscellaneous fixes. A lot of bnxt_re activity, there will be
more rc patches there coming.
- Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref,
soft lockups, error unwinding and some small functional issues
- Error unwind bug in rdma netlink
- Two issues with incorrect VLAN detection for iWarp
- skb_splice_from_iter() splat in siw
- Give SRP slab caches unique names to resolve the merge window
WARN_ON regression"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Fix the GID table length
RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages
RDMA/bnxt_re: Change the sequence of updating the CQ toggle value
RDMA/bnxt_re: Fix an error path in bnxt_re_add_device
RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
RDMA/bnxt_re: Fix a possible NULL pointer dereference
RDMA/bnxt_re: Return more meaningful error
RDMA/bnxt_re: Fix incorrect dereference of srq in async event
RDMA/bnxt_re: Fix out of bound check
RDMA/bnxt_re: Fix the max CQ WQEs for older adapters
RDMA/srpt: Make slab cache names unique
RDMA/irdma: Fix misspelling of "accept*"
RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
RDMA/core: Fix ENODEV error for iWARP test over vlan
RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event
RDMA/bnxt_re: Fix the max WQEs used in Static WQE mode
RDMA/bnxt_re: Add a check for memory allocation
RDMA/bnxt_re: Fix incorrect AVID type in WQE structure
RDMA/bnxt_re: Fix a possible memory leak
-----BEGIN PGP SIGNATURE-----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=tFDD
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.12-2024-10-16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge an amd-pstate driver fix for 6.12-rc4 from Mario Limonciello:
"Fix a regression introduced where boost control malfunctioned in
amd-pstate"
* tag 'amd-pstate-v6.12-2024-10-16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:
kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout
According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:
'When an interrupt transfer involves more data than can fit in one
data payload of the currently established maximum size, all data
payloads are required to be maximum-sized except for the last data
payload, which will contain the remaining data. An interrupt transfer
is complete when the endpoint does one of the following:
• Has transferred exactly the amount of data expected
• Transfers a packet with a payload size less than wMaxPacketSize or
transfers a zero-length packet'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This partially reverts 81b3e33bb054 ("Bluetooth: btusb: Don't fail
external suspend requests") as it introduced a call to hci_suspend_dev
that assumes the system-suspend which doesn't work well when just the
device is being suspended because wakeup flag is only set for remote
devices that can wakeup the system.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Kenneth Crudup <kenny@panix.com>
Fixes: 610712298b ("Bluetooth: btusb: Don't fail external suspend requests")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Rafael J. Wysocki <rafael@kernel.org>
If iso_init() has been called, iso_exit() must be called on module
unload. Without that, the struct proto that iso_init() registered with
proto_register() becomes invalid, which could cause unpredictable
problems later. In my case, with CONFIG_LIST_HARDENED and
CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually
triggers this BUG():
list_add corruption. next->prev should be prev (ffffffffb5355fd0),
but was 0000000000000068. (next=ffffffffc0a010d0).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x61/0xa0
...
__list_add_valid_or_report+0x61/0xa0
proto_register+0x299/0x320
hci_sock_init+0x16/0xc0 [bluetooth]
bt_init+0x68/0xd0 [bluetooth]
__pfx_bt_init+0x10/0x10 [bluetooth]
do_one_initcall+0x80/0x2f0
do_init_module+0x8b/0x230
__do_sys_init_module+0x15f/0x190
do_syscall_64+0x68/0x110
...
Cc: stable@vger.kernel.org
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the
duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...
This change removes the early return. The check for iso_debugfs being
NULL was unnecessary, it is always NULL when iso_inited is false.
Cc: stable@vger.kernel.org
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=DEUA
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix: dirty extents tracked in xarray for qgroups must be
adjusted for 32bit platforms
- fix potentially freeing uninitialized name in fscrypt structure
- fix warning about unneeded variable in a send callback
* tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
btrfs: send: cleanup unneeded return variable in changed_verity()
btrfs: fix uninitialized pointer free in add_inode_ref()
btrfs: use sector numbers as keys for the dirty extents xarray
-----BEGIN PGP SIGNATURE-----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=WhJj
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix race between session setup and session logoff
- add supplementary group support
* tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for supplementary groups
ksmbd: fix user-after-free from session log off
