mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2024-11-21 19:46:16 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,316,932 Commits 7 Branches 862 Tags 7.5 GiB
master
Commit Graph

35 Commits

Author SHA1 Message Date
Marco Elver
711d349174 kasan: revert eviction of stack traces in generic mode 
This partially reverts commits cc478e0b6b, 63b85ac56a, 08d7c94d96,
a414d4286f, and 773688a6cb to make use of variable-sized stack depot
records, since eviction of stack entries from stack depot forces fixed-
sized stack records.  Care was taken to retain the code cleanups by the
above commits.

Eviction was added to generic KASAN as a response to alleviating the
additional memory usage from fixed-sized stack records, but this still
uses more memory than previously.

With the re-introduction of variable-sized records for stack depot, we can
just switch back to non-evictable stack records again, and return back to
the previous performance and memory usage baseline.

Before (observed after a KASAN kernel boot):

  pools: 597
  refcounted_allocations: 17547
  refcounted_frees: 6477
  refcounted_in_use: 11070
  freelist_size: 3497
  persistent_count: 12163
  persistent_bytes: 1717008

After:

  pools: 319
  refcounted_allocations: 0
  refcounted_frees: 0
  refcounted_in_use: 0
  freelist_size: 0
  persistent_count: 29397
  persistent_bytes: 5183536

As can be seen from the counters, with a generic KASAN config, refcounted
allocations and evictions are no longer used.  Due to using variable-sized
records, I observe a reduction of 278 stack depot pools (saving 4448 KiB)
with my test setup.

Link: https://lkml.kernel.org/r/20240129100708.39460-2-elver@google.com
Fixes: cc478e0b6b ("kasan: avoid resetting aux_lock")
Fixes: 63b85ac56a ("kasan: stop leaking stack trace handles")
Fixes: 08d7c94d96 ("kasan: memset free track in qlink_free")
Fixes: a414d4286f ("kasan: handle concurrent kasan_record_aux_stack calls")
Fixes: 773688a6cb ("kasan: use stack_depot_put for Generic mode")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-02-23 17:27:12 -08:00
Linus Torvalds
fb46e22a9e Many singleton patches against the MM code. The patch series which 
are included in this merge do the following:
 
 - Peng Zhang has done some mapletree maintainance work in the
   series
 
 	"maple_tree: add mt_free_one() and mt_attr() helpers"
 	"Some cleanups of maple tree"
 
 - In the series "mm: use memmap_on_memory semantics for dax/kmem"
   Vishal Verma has altered the interworking between memory-hotplug
   and dax/kmem so that newly added 'device memory' can more easily
   have its memmap placed within that newly added memory.
 
 - Matthew Wilcox continues folio-related work (including a few
   fixes) in the patch series
 
 	"Add folio_zero_tail() and folio_fill_tail()"
 	"Make folio_start_writeback return void"
 	"Fix fault handler's handling of poisoned tail pages"
 	"Convert aops->error_remove_page to ->error_remove_folio"
 	"Finish two folio conversions"
 	"More swap folio conversions"
 
 - Kefeng Wang has also contributed folio-related work in the series
 
 	"mm: cleanup and use more folio in page fault"
 
 - Jim Cromie has improved the kmemleak reporting output in the
   series "tweak kmemleak report format".
 
 - In the series "stackdepot: allow evicting stack traces" Andrey
   Konovalov to permits clients (in this case KASAN) to cause
   eviction of no longer needed stack traces.
 
 - Charan Teja Kalla has fixed some accounting issues in the page
   allocator's atomic reserve calculations in the series "mm:
   page_alloc: fixes for high atomic reserve caluculations".
 
 - Dmitry Rokosov has added to the samples/ dorectory some sample
   code for a userspace memcg event listener application.  See the
   series "samples: introduce cgroup events listeners".
 
 - Some mapletree maintanance work from Liam Howlett in the series
   "maple_tree: iterator state changes".
 
 - Nhat Pham has improved zswap's approach to writeback in the
   series "workload-specific and memory pressure-driven zswap
   writeback".
 
 - DAMON/DAMOS feature and maintenance work from SeongJae Park in
   the series
 
 	"mm/damon: let users feed and tame/auto-tune DAMOS"
 	"selftests/damon: add Python-written DAMON functionality tests"
 	"mm/damon: misc updates for 6.8"
 
 - Yosry Ahmed has improved memcg's stats flushing in the series
   "mm: memcg: subtree stats flushing and thresholds".
 
 - In the series "Multi-size THP for anonymous memory" Ryan Roberts
   has added a runtime opt-in feature to transparent hugepages which
   improves performance by allocating larger chunks of memory during
   anonymous page faults.
 
 - Matthew Wilcox has also contributed some cleanup and maintenance
   work against eh buffer_head code int he series "More buffer_head
   cleanups".
 
 - Suren Baghdasaryan has done work on Andrea Arcangeli's series
   "userfaultfd move option".  UFFDIO_MOVE permits userspace heap
   compaction algorithms to move userspace's pages around rather than
   UFFDIO_COPY'a alloc/copy/free.
 
 - Stefan Roesch has developed a "KSM Advisor", in the series
   "mm/ksm: Add ksm advisor".  This is a governor which tunes KSM's
   scanning aggressiveness in response to userspace's current needs.
 
 - Chengming Zhou has optimized zswap's temporary working memory
   use in the series "mm/zswap: dstmem reuse optimizations and
   cleanups".
 
 - Matthew Wilcox has performed some maintenance work on the
   writeback code, both code and within filesystems.  The series is
   "Clean up the writeback paths".
 
 - Andrey Konovalov has optimized KASAN's handling of alloc and
   free stack traces for secondary-level allocators, in the series
   "kasan: save mempool stack traces".
 
 - Andrey also performed some KASAN maintenance work in the series
   "kasan: assorted clean-ups".
 
 - David Hildenbrand has gone to town on the rmap code.  Cleanups,
   more pte batching, folio conversions and more.  See the series
   "mm/rmap: interface overhaul".
 
 - Kinsey Ho has contributed some maintenance work on the MGLRU
   code in the series "mm/mglru: Kconfig cleanup".
 
 - Matthew Wilcox has contributed lruvec page accounting code
   cleanups in the series "Remove some lruvec page accounting
   functions".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
 jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
 Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
 =0NHs
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Peng Zhang has done some mapletree maintainance work in the series

	'maple_tree: add mt_free_one() and mt_attr() helpers'
	'Some cleanups of maple tree'

   - In the series 'mm: use memmap_on_memory semantics for dax/kmem'
     Vishal Verma has altered the interworking between memory-hotplug
     and dax/kmem so that newly added 'device memory' can more easily
     have its memmap placed within that newly added memory.

   - Matthew Wilcox continues folio-related work (including a few fixes)
     in the patch series

	'Add folio_zero_tail() and folio_fill_tail()'
	'Make folio_start_writeback return void'
	'Fix fault handler's handling of poisoned tail pages'
	'Convert aops->error_remove_page to ->error_remove_folio'
	'Finish two folio conversions'
	'More swap folio conversions'

   - Kefeng Wang has also contributed folio-related work in the series

	'mm: cleanup and use more folio in page fault'

   - Jim Cromie has improved the kmemleak reporting output in the series
     'tweak kmemleak report format'.

   - In the series 'stackdepot: allow evicting stack traces' Andrey
     Konovalov to permits clients (in this case KASAN) to cause eviction
     of no longer needed stack traces.

   - Charan Teja Kalla has fixed some accounting issues in the page
     allocator's atomic reserve calculations in the series 'mm:
     page_alloc: fixes for high atomic reserve caluculations'.

   - Dmitry Rokosov has added to the samples/ dorectory some sample code
     for a userspace memcg event listener application. See the series
     'samples: introduce cgroup events listeners'.

   - Some mapletree maintanance work from Liam Howlett in the series
     'maple_tree: iterator state changes'.

   - Nhat Pham has improved zswap's approach to writeback in the series
     'workload-specific and memory pressure-driven zswap writeback'.

   - DAMON/DAMOS feature and maintenance work from SeongJae Park in the
     series

	'mm/damon: let users feed and tame/auto-tune DAMOS'
	'selftests/damon: add Python-written DAMON functionality tests'
	'mm/damon: misc updates for 6.8'

   - Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
     memcg: subtree stats flushing and thresholds'.

   - In the series 'Multi-size THP for anonymous memory' Ryan Roberts
     has added a runtime opt-in feature to transparent hugepages which
     improves performance by allocating larger chunks of memory during
     anonymous page faults.

   - Matthew Wilcox has also contributed some cleanup and maintenance
     work against eh buffer_head code int he series 'More buffer_head
     cleanups'.

   - Suren Baghdasaryan has done work on Andrea Arcangeli's series
     'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
     compaction algorithms to move userspace's pages around rather than
     UFFDIO_COPY'a alloc/copy/free.

   - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
     Add ksm advisor'. This is a governor which tunes KSM's scanning
     aggressiveness in response to userspace's current needs.

   - Chengming Zhou has optimized zswap's temporary working memory use
     in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.

   - Matthew Wilcox has performed some maintenance work on the writeback
     code, both code and within filesystems. The series is 'Clean up the
     writeback paths'.

   - Andrey Konovalov has optimized KASAN's handling of alloc and free
     stack traces for secondary-level allocators, in the series 'kasan:
     save mempool stack traces'.

   - Andrey also performed some KASAN maintenance work in the series
     'kasan: assorted clean-ups'.

   - David Hildenbrand has gone to town on the rmap code. Cleanups, more
     pte batching, folio conversions and more. See the series 'mm/rmap:
     interface overhaul'.

   - Kinsey Ho has contributed some maintenance work on the MGLRU code
     in the series 'mm/mglru: Kconfig cleanup'.

   - Matthew Wilcox has contributed lruvec page accounting code cleanups
     in the series 'Remove some lruvec page accounting functions'"

* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
  mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
  mm, treewide: introduce NR_PAGE_ORDERS
  selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
  selftests/mm: skip test if application doesn't has root privileges
  selftests/mm: conform test to TAP format output
  selftests: mm: hugepage-mmap: conform to TAP format output
  selftests/mm: gup_test: conform test to TAP format output
  mm/selftests: hugepage-mremap: conform test to TAP format output
  mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
  mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
  mm/memcontrol: remove __mod_lruvec_page_state()
  mm/khugepaged: use a folio more in collapse_file()
  slub: use a folio in __kmalloc_large_node
  slub: use folio APIs in free_large_kmalloc()
  slub: use alloc_pages_node() in alloc_slab_page()
  mm: remove inc/dec lruvec page state functions
  mm: ratelimit stat flush from workingset shrinker
  kasan: stop leaking stack trace handles
  mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
  mm/mglru: add dummy pmd_dirty()
  ...
 2024-01-09 11:18:47 -08:00
Andrey Konovalov
63b85ac56a kasan: stop leaking stack trace handles 
Commit 773688a6cb ("kasan: use stack_depot_put for Generic mode") added
support for stack trace eviction for Generic KASAN.

However, that commit didn't evict stack traces when the object is not put
into quarantine.  As a result, some stack traces are never evicted from
the stack depot.

In addition, with the "kasan: save mempool stack traces" series, the free
stack traces for mempool objects are also not properly evicted from the
stack depot.

Fix both issues by:

1. Evicting all stack traces when an object if freed if it was not put
   into quarantine;

2. Always evicting an existing free stack trace when a new one is saved.

Also do a few related clean-ups:

- Do not zero out free track when initializing/invalidating free meta:
  set a value in shadow memory instead;

- Rename KASAN_SLAB_FREETRACK to KASAN_SLAB_FREE_META;

- Drop the kasan_init_cache_meta function as it's not used by KASAN;

- Add comments for the kasan_alloc_meta and kasan_free_meta structs.

[akpm@linux-foundation.org: make release_free_meta() and release_alloc_meta() static]
Link: https://lkml.kernel.org/r/20231226225121.235865-1-andrey.konovalov@linux.dev
Fixes: 773688a6cb ("kasan: use stack_depot_put for Generic mode")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-01-05 10:17:45 -08:00
Andrey Konovalov
08d7c94d96 kasan: memset free track in qlink_free 
Instead of only zeroing out the stack depot handle when evicting the
free stack trace in qlink_free, zero out the whole track.

Do this just to produce a similar effect for alloc and free meta. The
other fields of the free track besides the stack trace handle are
considered invalid at this point anyway, so no harm in zeroing them out.

Link: https://lkml.kernel.org/r/db987c1cd011547e85353b0b9997de190c97e3e6.1703020707.git.andreyknvl@google.com
Fixes: 773688a6cb ("kasan: use stack_depot_put for Generic mode")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-12-29 11:58:42 -08:00
Andrey Konovalov
773688a6cb kasan: use stack_depot_put for Generic mode 
Evict alloc/free stack traces from the stack depot for Generic KASAN once
they are evicted from the quaratine.

For auxiliary stack traces, evict the oldest stack trace once a new one is
saved (KASAN only keeps references to the last two).

Also evict all saved stack traces on krealloc.

To avoid double-evicting and mis-evicting stack traces (in case KASAN's
metadata was corrupted), reset KASAN's per-object metadata that stores
stack depot handles when the object is initialized and when it's evicted
from the quarantine.

Note that stack_depot_put is no-op if the handle is 0.

Link: https://lkml.kernel.org/r/5cef104d9b842899489b4054fe8d1339a71acee0.1700502145.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-12-10 16:51:48 -08:00
Vlastimil Babka
72786c0a3d KASAN: remove code paths guarded by CONFIG_SLAB 
With SLAB removed and SLUB the only remaining allocator, we can clean up
some code that was depending on the choice.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
 2023-12-05 11:17:51 +01:00
Andrey Konovalov
d7196d87a1 kasan: unify printk prefixes 
Unify prefixes for printk messages in mm/kasan/.

Link: https://lkml.kernel.org/r/35589629806cf0840e5f01ec9d8011a7bad648df.1696605143.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-10-18 14:34:15 -07:00
Zqiang
be41d814c6 kasan: fix lockdep report invalid wait context 
For kernels built with the following options and booting

CONFIG_SLUB=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y

[    0.523115] [ BUG: Invalid wait context ]
[    0.523315] 6.3.0-rc1-yocto-standard+ #739 Not tainted
[    0.523649] -----------------------------
[    0.523663] swapper/0/0 is trying to lock:
[    0.523663] ffff888035611360 (&c->lock){....}-{3:3}, at: put_cpu_partial+0x2e/0x1e0
[    0.523663] other info that might help us debug this:
[    0.523663] context-{2:2}
[    0.523663] no locks held by swapper/0/0.
[    0.523663] stack backtrace:
[    0.523663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.3.0-rc1-yocto-standard+ #739
[    0.523663] Call Trace:
[    0.523663]  <IRQ>
[    0.523663]  dump_stack_lvl+0x64/0xb0
[    0.523663]  dump_stack+0x10/0x20
[    0.523663]  __lock_acquire+0x6c4/0x3c10
[    0.523663]  lock_acquire+0x188/0x460
[    0.523663]  put_cpu_partial+0x5a/0x1e0
[    0.523663]  __slab_free+0x39a/0x520
[    0.523663]  ___cache_free+0xa9/0xc0
[    0.523663]  qlist_free_all+0x7a/0x160
[    0.523663]  per_cpu_remove_cache+0x5c/0x70
[    0.523663]  __flush_smp_call_function_queue+0xfc/0x330
[    0.523663]  generic_smp_call_function_single_interrupt+0x13/0x20
[    0.523663]  __sysvec_call_function+0x86/0x2e0
[    0.523663]  sysvec_call_function+0x73/0x90
[    0.523663]  </IRQ>
[    0.523663]  <TASK>
[    0.523663]  asm_sysvec_call_function+0x1b/0x20
[    0.523663] RIP: 0010:default_idle+0x13/0x20
[    0.523663] RSP: 0000:ffffffff83e07dc0 EFLAGS: 00000246
[    0.523663] RAX: 0000000000000000 RBX: ffffffff83e1e200 RCX: ffffffff82a83293
[    0.523663] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8119a6b1
[    0.523663] RBP: ffffffff83e07dc8 R08: 0000000000000001 R09: ffffed1006ac0d66
[    0.523663] R10: ffff888035606b2b R11: ffffed1006ac0d65 R12: 0000000000000000
[    0.523663] R13: ffffffff83e1e200 R14: ffffffff84a7d980 R15: 0000000000000000
[    0.523663]  default_idle_call+0x6c/0xa0
[    0.523663]  do_idle+0x2e1/0x330
[    0.523663]  cpu_startup_entry+0x20/0x30
[    0.523663]  rest_init+0x152/0x240
[    0.523663]  arch_call_rest_init+0x13/0x40
[    0.523663]  start_kernel+0x331/0x470
[    0.523663]  x86_64_start_reservations+0x18/0x40
[    0.523663]  x86_64_start_kernel+0xbb/0x120
[    0.523663]  secondary_startup_64_no_verify+0xe0/0xeb
[    0.523663]  </TASK>

The local_lock_irqsave() is invoked in put_cpu_partial() and happens in
IPI context, due to the CONFIG_PROVE_RAW_LOCK_NESTING=y (the
LD_WAIT_CONFIG not equal to LD_WAIT_SPIN), so acquire local_lock in IPI
context will trigger above calltrace.

This commit therefore moves qlist_free_all() from hard-irq context to task
context.

Link: https://lkml.kernel.org/r/20230327120019.1027640-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-04-21 14:51:59 -07:00
Andrey Konovalov
06bc4cf6cd kasan: give better names to shadow values 
Rename KASAN_KMALLOC_* shadow values to KASAN_SLAB_*, as they are used for
all slab allocations, not only for kmalloc.

Also rename KASAN_FREE_PAGE to KASAN_PAGE_FREE to be consistent with
KASAN_PAGE_REDZONE and KASAN_SLAB_FREE.

Link: https://lkml.kernel.org/r/bebcaf4eafdb0cabae0401a69c0af956aa87fcaa.1652111464.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-05-13 07:20:19 -07:00
Zqiang
07d067e4f2 kasan: fix sleeping function called from invalid context on RT kernel 
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
...........
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt16-yocto-preempt-rt #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x60/0x8c
dump_stack+0x10/0x12
 __might_resched.cold+0x13b/0x173
rt_spin_lock+0x5b/0xf0
 ___cache_free+0xa5/0x180
qlist_free_all+0x7a/0x160
per_cpu_remove_cache+0x5f/0x70
smp_call_function_many_cond+0x4c4/0x4f0
on_each_cpu_cond_mask+0x49/0xc0
kasan_quarantine_remove_cache+0x54/0xf0
kasan_cache_shrink+0x9/0x10
kmem_cache_shrink+0x13/0x20
acpi_os_purge_cache+0xe/0x20
acpi_purge_cached_objects+0x21/0x6d
acpi_initialize_objects+0x15/0x3b
acpi_init+0x130/0x5ba
do_one_initcall+0xe5/0x5b0
kernel_init_freeable+0x34f/0x3ad
kernel_init+0x1e/0x140
ret_from_fork+0x22/0x30

When the kmem_cache_shrink() was called, the IPI was triggered, the
___cache_free() is called in IPI interrupt context, the local-lock or
spin-lock will be acquired.  On PREEMPT_RT kernel, these locks are
replaced with sleepbale rt-spinlock, so the above problem is triggered. 
Fix it by moving the qlist_free_allfrom() from IPI interrupt context to
task context when PREEMPT_RT is enabled.

[akpm@linux-foundation.org: reduce ifdeffery]
Link: https://lkml.kernel.org/r/20220401134649.2222485-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2022-04-29 14:36:58 -07:00
Zqiang
31fa985b41 kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time 
kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/
destroy().  The kasan_quarantine_remove_cache() call is protected by
cpuslock in kmem_cache_destroy() to ensure serialization with
kasan_cpu_offline().

However the kasan_quarantine_remove_cache() call is not protected by
cpuslock in kmem_cache_shrink().  When a CPU is going offline and cache
shrink occurs at same time, the cpu_quarantine may be corrupted by
interrupt (per_cpu_remove_cache operation).

So add a cpu_quarantine offline flags check in per_cpu_remove_cache().

[akpm@linux-foundation.org: add comment, per Zqiang]

Link: https://lkml.kernel.org/r/20220414025925.2423818-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-04-27 13:28:48 -07:00
Linus Torvalds
f56caedaf9 Merge branch 'akpm' (patches from Andrew) 
Merge misc updates from Andrew Morton:
 "146 patches.

  Subsystems affected by this patch series: kthread, ia64, scripts,
  ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
  dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
  memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
  userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
  ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
  damon)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
  mm/damon: hide kernel pointer from tracepoint event
  mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
  mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
  mm/damon/dbgfs: remove an unnecessary variable
  mm/damon: move the implementation of damon_insert_region to damon.h
  mm/damon: add access checking for hugetlb pages
  Docs/admin-guide/mm/damon/usage: update for schemes statistics
  mm/damon/dbgfs: support all DAMOS stats
  Docs/admin-guide/mm/damon/reclaim: document statistics parameters
  mm/damon/reclaim: provide reclamation statistics
  mm/damon/schemes: account how many times quota limit has exceeded
  mm/damon/schemes: account scheme actions that successfully applied
  mm/damon: remove a mistakenly added comment for a future feature
  Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
  Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
  Docs/admin-guide/mm/damon/usage: remove redundant information
  Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
  mm/damon: convert macro functions to static inline functions
  mm/damon: modify damon_rand() macro to static inline function
  mm/damon: move damon_rand() definition into damon.h
  ...
 2022-01-15 20:37:06 +02:00
Andrey Konovalov
26dca996ea kasan: fix quarantine conflicting with init_on_free 
KASAN's quarantine might save its metadata inside freed objects.  As
this happens after the memory is zeroed by the slab allocator when
init_on_free is enabled, the memory coming out of quarantine is not
properly zeroed.

This causes lib/test_meminit.c tests to fail with Generic KASAN.

Zero the metadata when the object is removed from quarantine.

Link: https://lkml.kernel.org/r/2805da5df4b57138fdacd671f5d227d58950ba54.1640037083.git.andreyknvl@google.com
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-01-15 16:30:26 +02:00
Matthew Wilcox (Oracle)
6e48a966df mm/kasan: Convert to struct folio and struct slab 
KASAN accesses some slab related struct page fields so we need to
convert it to struct slab. Some places are a bit simplified thanks to
kasan_addr_to_slab() encapsulating the PageSlab flag check through
virt_to_slab().  When resolving object address to either a real slab or
a large kmalloc, use struct folio as the intermediate type for testing
the slab flag to avoid unnecessary implicit compound_head().

[ vbabka@suse.cz: use struct folio, adjust to differences in previous
  patches ]

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Tested-by: Hyeongogn Yoo <42.hyeyoo@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <kasan-dev@googlegroups.com>
 2022-01-06 12:26:14 +01:00
Ingo Molnar
f0953a1bba mm: fix typos in comments 
Fix ~94 single-word typos in locking code comments, plus a few
very obvious grammar mistakes.

Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com
Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2021-05-07 00:26:35 -07:00
Andrey Konovalov
f00748bfa0 kasan: prefix global functions with kasan_ 
Patch series "kasan: HW_TAGS tests support and fixes", v4.

This patchset adds support for running KASAN-KUnit tests with the
hardware tag-based mode and also contains a few fixes.

This patch (of 15):

There's a number of internal KASAN functions that are used across multiple
source code files and therefore aren't marked as static inline.  To avoid
littering the kernel function names list with generic function names,
prefix all such KASAN functions with kasan_.

As a part of this change:

 - Rename internal (un)poison_range() to kasan_(un)poison() (no _range)
   to avoid name collision with a public kasan_unpoison_range().

 - Rename check_memory_region() to kasan_check_range(), as it's a more
   fitting name.

Link: https://lkml.kernel.org/r/cover.1610733117.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I719cc93483d4ba288a634dba80ee6b7f2809cd26
Link: https://lkml.kernel.org/r/13777aedf8d3ebbf35891136e1f2287e2f34aaba.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2021-02-24 13:38:30 -08:00
Andrey Konovalov
97593cad00 kasan: sanitize objects when metadata doesn't fit 
KASAN marks caches that are sanitized with the SLAB_KASAN cache flag.
Currently if the metadata that is appended after the object (stores e.g.
stack trace ids) doesn't fit into KMALLOC_MAX_SIZE (can only happen with
SLAB, see the comment in the patch), KASAN turns off sanitization
completely.

With this change sanitization of the object data is always enabled.
However the metadata is only stored when it fits.  Instead of checking for
SLAB_KASAN flag accross the code to find out whether the metadata is
there, use cache->kasan_info.alloc/free_meta_offset.  As 0 can be a valid
value for free_meta_offset, introduce KASAN_NO_FREE_META as an indicator
that the free metadata is missing.

Without this change all sanitized KASAN objects would be put into
quarantine with generic KASAN.  With this change, only the objects that
have metadata (i.e.  when it fits) are put into quarantine, the rest is
freed right away.

Along the way rework __kasan_cache_create() and add claryfying comments.

Link: https://lkml.kernel.org/r/aee34b87a5e4afe586c2ac6a0b32db8dc4dcc2dc.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Icd947e2bea054cb5cfbdc6cf6652227d97032dcb
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-12-22 12:55:09 -08:00
Andrey Konovalov
6476792f10 kasan: rename get_alloc/free_info 
Rename get_alloc_info() and get_free_info() to kasan_get_alloc_meta() and
kasan_get_free_meta() to better reflect what those do and avoid confusion
with kasan_set_free_info().

No functional changes.

Link: https://lkml.kernel.org/r/27b7c036b754af15a2839e945f6d8bfce32b4c2f.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ib6e4ba61c8b12112b403d3479a9799ac8fff8de1
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-12-22 12:55:08 -08:00
Andrey Konovalov
c696de9f12 kasan: simplify quarantine_put call site 
Patch series "kasan: boot parameters for hardware tag-based mode", v4.

=== Overview

Hardware tag-based KASAN mode [1] is intended to eventually be used in
production as a security mitigation. Therefore there's a need for finer
control over KASAN features and for an existence of a kill switch.

This patchset adds a few boot parameters for hardware tag-based KASAN that
allow to disable or otherwise control particular KASAN features, as well
as provides some initial optimizations for running KASAN in production.

There's another planned patchset what will further optimize hardware
tag-based KASAN, provide proper benchmarking and tests, and will fully
enable tag-based KASAN for production use.

Hardware tag-based KASAN relies on arm64 Memory Tagging Extension (MTE)
[2] to perform memory and pointer tagging. Please see [3] and [4] for
detailed analysis of how MTE helps to fight memory safety problems.

The features that can be controlled are:

1. Whether KASAN is enabled at all.
2. Whether KASAN collects and saves alloc/free stacks.
3. Whether KASAN panics on a detected bug or not.

The patch titled "kasan: add and integrate kasan boot parameters" of this
series adds a few new boot parameters.

kasan.mode allows to choose one of three main modes:

- kasan.mode=off - KASAN is disabled, no tag checks are performed
- kasan.mode=prod - only essential production features are enabled
- kasan.mode=full - all KASAN features are enabled

The chosen mode provides default control values for the features mentioned
above. However it's also possible to override the default values by
providing:

- kasan.stacktrace=off/on - enable stacks collection
                            (default: on for mode=full, otherwise off)
- kasan.fault=report/panic - only report tag fault or also panic
                             (default: report)

If kasan.mode parameter is not provided, it defaults to full when
CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise.

It is essential that switching between these modes doesn't require
rebuilding the kernel with different configs, as this is required by
the Android GKI (Generic Kernel Image) initiative.

=== Benchmarks

For now I've only performed a few simple benchmarks such as measuring
kernel boot time and slab memory usage after boot. There's an upcoming
patchset which will optimize KASAN further and include more detailed
benchmarking results.

The benchmarks were performed in QEMU and the results below exclude the
slowdown caused by QEMU memory tagging emulation (as it's different from
the slowdown that will be introduced by hardware and is therefore
irrelevant).

KASAN_HW_TAGS=y + kasan.mode=off introduces no performance or memory
impact compared to KASAN_HW_TAGS=n.

kasan.mode=prod (manually excluding tagging) introduces 3% of performance
and no memory impact (except memory used by hardware to store tags)
compared to kasan.mode=off.

kasan.mode=full has about 40% performance and 30% memory impact over
kasan.mode=prod. Both come from alloc/free stack collection.

=== Notes

This patchset is available here:

https://github.com/xairy/linux/tree/up-boot-mte-v4

This patchset is based on v11 of "kasan: add hardware tag-based mode for
arm64" patchset [1].

For testing in QEMU hardware tag-based KASAN requires:

1. QEMU built from master [6] (use "-machine virt,mte=on -cpu max" arguments
   to run).
2. GCC version 10.

[1] https://lore.kernel.org/linux-arm-kernel/cover.1606161801.git.andreyknvl@google.com/T/#t
[2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety
[3] https://arxiv.org/pdf/1802.09517.pdf
[4] https://github.com/microsoft/MSRC-Security-Research/blob/master/papers/2020/Security%20analysis%20of%20memory%20tagging.pdf
[5] https://source.android.com/devices/architecture/kernel/generic-kernel-image
[6] https://github.com/qemu/qemu

=== Tags

Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>

This patch (of 19):

Move get_free_info() call into quarantine_put() to simplify the call site.

No functional changes.

Link: https://lkml.kernel.org/r/cover.1606162397.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/312d0a3ef92cc6dc4fa5452cbc1714f9393ca239.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Iab0f04e7ebf8d83247024b7190c67c3c34c7940f
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-12-22 12:55:08 -08:00
Andrey Konovalov
11f094e312 kasan: drop unnecessary GPL text from comment headers 
Patch series "kasan: add hardware tag-based mode for arm64", v11.

This patchset adds a new hardware tag-based mode to KASAN [1].  The new
mode is similar to the existing software tag-based KASAN, but relies on
arm64 Memory Tagging Extension (MTE) [2] to perform memory and pointer
tagging (instead of shadow memory and compiler instrumentation).

This patchset is co-developed and tested by
Vincenzo Frascino <vincenzo.frascino@arm.com>.

This patchset is available here:

https://github.com/xairy/linux/tree/up-kasan-mte-v11

For testing in QEMU hardware tag-based KASAN requires:

1. QEMU built from master [4] (use "-machine virt,mte=on -cpu max" arguments
   to run).
2. GCC version 10.

[1] https://www.kernel.org/doc/html/latest/dev-tools/kasan.html
[2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety
[3] git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux for-next/mte
[4] https://github.com/qemu/qemu

====== Overview

The underlying ideas of the approach used by hardware tag-based KASAN are:

1. By relying on the Top Byte Ignore (TBI) arm64 CPU feature, pointer tags
   are stored in the top byte of each kernel pointer.

2. With the Memory Tagging Extension (MTE) arm64 CPU feature, memory tags
   for kernel memory allocations are stored in a dedicated memory not
   accessible via normal instuctions.

3. On each memory allocation, a random tag is generated, embedded it into
   the returned pointer, and the corresponding memory is tagged with the
   same tag value.

4. With MTE the CPU performs a check on each memory access to make sure
   that the pointer tag matches the memory tag.

5. On a tag mismatch the CPU generates a tag fault, and a KASAN report is
   printed.

Same as other KASAN modes, hardware tag-based KASAN is intended as a
debugging feature at this point.

====== Rationale

There are two main reasons for this new hardware tag-based mode:

1. Previously implemented software tag-based KASAN is being successfully
   used on dogfood testing devices due to its low memory overhead (as
   initially planned). The new hardware mode keeps the same low memory
   overhead, and is expected to have significantly lower performance
   impact, due to the tag checks being performed by the hardware.
   Therefore the new mode can be used as a better alternative in dogfood
   testing for hardware that supports MTE.

2. The new mode lays the groundwork for the planned in-kernel MTE-based
   memory corruption mitigation to be used in production.

====== Technical details

Considering the implementation perspective, hardware tag-based KASAN is
almost identical to the software mode.  The key difference is using MTE
for assigning and checking tags.

Compared to the software mode, the hardware mode uses 4 bits per tag, as
dictated by MTE.  Pointer tags are stored in bits [56:60), the top 4 bits
have the normal value 0xF.  Having less distict tags increases the
probablity of false negatives (from ~1/256 to ~1/16) in certain cases.

Only synchronous exceptions are set up and used by hardware tag-based KASAN.

====== Benchmarks

Note: all measurements have been performed with software emulation of Memory
Tagging Extension, performance numbers for hardware tag-based KASAN on the
actual hardware are expected to be better.

Boot time [1]:
* 2.8 sec for clean kernel
* 5.7 sec for hardware tag-based KASAN
* 11.8 sec for software tag-based KASAN
* 11.6 sec for generic KASAN

Slab memory usage after boot [2]:
* 7.0 kb for clean kernel
* 9.7 kb for hardware tag-based KASAN
* 9.7 kb for software tag-based KASAN
* 41.3 kb for generic KASAN

Measurements have been performed with:
* defconfig-based configs
* Manually built QEMU master
* QEMU arguments: -machine virt,mte=on -cpu max
* CONFIG_KASAN_STACK_ENABLE disabled
* CONFIG_KASAN_INLINE enabled
* clang-10 as the compiler and gcc-10 as the assembler

[1] Time before the ext4 driver is initialized.
[2] Measured as `cat /proc/meminfo | grep Slab`.

====== Notes

The cover letter for software tag-based KASAN patchset can be found here:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0116523cfffa62aeb5aa3b85ce7419f3dae0c1b8

===== Tags

Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>

This patch (of 41):

Don't mention "GNU General Public License version 2" text explicitly, as
it's already covered by the SPDX-License-Identifier.

Link: https://lkml.kernel.org/r/cover.1606161801.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/6ea9f5f4aa9dbbffa0d0c0a780b37699a4531034.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-12-22 12:55:06 -08:00
Kuan-Ying Lee
6c82d45c7f kasan: fix object remaining in offline per-cpu quarantine 
We hit this issue in our internal test.  When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first.  If the cpu goes
offline, object still remains in the per-cpu quarantine.  If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.

  =============================================================================
  BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  Disabling lock debugging due to kernel taint
  INFO: Slab 0x(____ptrval____) objects=34 used=1 fp=0x(____ptrval____) flags=0x2ffff00000010200
  CPU: 3 PID: 176 Comm: cat Tainted: G    B             5.10.0-rc1-00007-g4525c8781ec0-dirty #10
  Hardware name: linux,dummy-virt (DT)
  Call trace:
     dump_backtrace+0x0/0x2b0
     show_stack+0x18/0x68
     dump_stack+0xfc/0x168
     slab_err+0xac/0xd4
     __kmem_cache_shutdown+0x1e4/0x3c8
     kmem_cache_destroy+0x68/0x130
     test_version_show+0x84/0xf0
     module_attr_show+0x40/0x60
     sysfs_kf_seq_show+0x128/0x1c0
     kernfs_seq_show+0xa0/0xb8
     seq_read+0x1f0/0x7e8
     kernfs_fop_read+0x70/0x338
     vfs_read+0xe4/0x250
     ksys_read+0xc8/0x180
     __arm64_sys_read+0x44/0x58
     el0_svc_common.constprop.0+0xac/0x228
     do_el0_svc+0x38/0xa0
     el0_sync_handler+0x170/0x178
     el0_sync+0x174/0x180
  INFO: Object 0x(____ptrval____) @offset=15848
  INFO: Allocated in test_version_show+0x98/0xf0 age=8188 cpu=6 pid=172
     stack_trace_save+0x9c/0xd0
     set_track+0x64/0xf0
     alloc_debug_processing+0x104/0x1a0
     ___slab_alloc+0x628/0x648
     __slab_alloc.isra.0+0x2c/0x58
     kmem_cache_alloc+0x560/0x588
     test_version_show+0x98/0xf0
     module_attr_show+0x40/0x60
     sysfs_kf_seq_show+0x128/0x1c0
     kernfs_seq_show+0xa0/0xb8
     seq_read+0x1f0/0x7e8
     kernfs_fop_read+0x70/0x338
     vfs_read+0xe4/0x250
     ksys_read+0xc8/0x180
     __arm64_sys_read+0x44/0x58
     el0_svc_common.constprop.0+0xac/0x228
  kmem_cache_destroy test_module_slab: Slab cache still has objects

Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline.  Set a per-cpu variable to
indicate this cpu is offline.

[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug]
  Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com

Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Guangye Yang <guangye.yang@mediatek.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Qian Cai <qcai@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-12-11 14:02:14 -08:00
Walter Wu
e4b7818b9a kasan: record and print the free track 
Move free track from kasan_alloc_meta to kasan_free_meta in order to make
struct kasan_alloc_meta and kasan_free_meta size are both 16 bytes.  It is
a good size because it is the minimal redzone size and a good number of
alignment.

For free track, we make some modifications as shown below:
1) Remove the free_track from struct kasan_alloc_meta.
2) Add the free_track into struct kasan_free_meta.
3) Add a macro KASAN_KMALLOC_FREETRACK in order to check whether
   it can print free stack in KASAN report.

[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437

[walter-zh.wu@mediatek.com: build fix]
  Link: http://lkml.kernel.org/r/20200710162440.23887-1-walter-zh.wu@mediatek.com

Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Link: http://lkml.kernel.org/r/20200601051022.1230-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2020-08-07 11:33:28 -07:00
Arun KS
ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic 
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:47 -08:00
Andrey Konovalov
e886bf9d9a kasan: add SPDX-License-Identifier mark to source files 
This patch adds a "SPDX-License-Identifier: GPL-2.0" mark to all source
files under mm/kasan.

Link: http://lkml.kernel.org/r/bce2d1e618afa5142e81961ab8fa4b4165337380.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:44 -08:00
Clark Williams
026d1eaf5e mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t 
The static lock quarantine_lock is used in quarantine.c to protect the
quarantine queue datastructures.  It is taken inside quarantine queue
manipulation routines (quarantine_put(), quarantine_reduce() and
quarantine_remove_cache()), with IRQs disabled.  This is not a problem on
a stock kernel but is problematic on an RT kernel where spin locks are
sleeping spinlocks, which can sleep and can not be acquired with disabled
interrupts.

Convert the quarantine_lock to a raw spinlock_t.  The usage of
quarantine_lock is confined to quarantine.c and the work performed while
the lock is held is used for debug purpose.

[bigeasy@linutronix.de: slightly altered the commit message]
Link: http://lkml.kernel.org/r/20181010214945.5owshc3mlrh74z4b@linutronix.de
Signed-off-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-10-26 16:38:15 -07:00
Dmitry Vyukov
ce5bec54bb kasan: fix races in quarantine_remove_cache() 
quarantine_remove_cache() frees all pending objects that belong to the
cache, before we destroy the cache itself.  However there are currently
two possibilities how it can fail to do so.

First, another thread can hold some of the objects from the cache in
temp list in quarantine_put().  quarantine_put() has a windows of
enabled interrupts, and on_each_cpu() in quarantine_remove_cache() can
finish right in that window.  These objects will be later freed into the
destroyed cache.

Then, quarantine_reduce() has the same problem.  It grabs a batch of
objects from the global quarantine, then unlocks quarantine_lock and
then frees the batch.  quarantine_remove_cache() can finish while some
objects from the cache are still in the local to_free list in
quarantine_reduce().

Fix the race with quarantine_put() by disabling interrupts for the whole
duration of quarantine_put().  In combination with on_each_cpu() in
quarantine_remove_cache() it ensures that quarantine_remove_cache()
either sees the objects in the per-cpu list or in the global list.

Fix the race with quarantine_reduce() by protecting quarantine_reduce()
with srcu critical section and then doing synchronize_srcu() at the end
of quarantine_remove_cache().

I've done some assessment of how good synchronize_srcu() works in this
case.  And on a 4 CPU VM I see that it blocks waiting for pending read
critical sections in about 2-3% of cases.  Which looks good to me.

I suspect that these races are the root cause of some GPFs that I
episodically hit.  Previously I did not have any explanation for them.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
  IP: qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
  PGD 6aeea067
  PUD 60ed7067
  PMD 0
  Oops: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 0 PID: 13667 Comm: syz-executor2 Not tainted 4.10.0+ #60
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff88005f948040 task.stack: ffff880069818000
  RIP: 0010:qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
  RSP: 0018:ffff88006981f298 EFLAGS: 00010246
  RAX: ffffea0000ffff00 RBX: 0000000000000000 RCX: ffffea0000ffff1f
  RDX: 0000000000000000 RSI: ffff88003fffc3e0 RDI: 0000000000000000
  RBP: ffff88006981f2c0 R08: ffff88002fed7bd8 R09: 00000001001f000d
  R10: 00000000001f000d R11: ffff88006981f000 R12: ffff88003fffc3e0
  R13: ffff88006981f2d0 R14: ffffffff81877fae R15: 0000000080000000
  FS:  00007fb911a2d700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000c8 CR3: 0000000060ed6000 CR4: 00000000000006f0
  Call Trace:
   quarantine_reduce+0x10e/0x120 mm/kasan/quarantine.c:239
   kasan_kmalloc+0xca/0xe0 mm/kasan/kasan.c:590
   kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
   slab_post_alloc_hook mm/slab.h:456 [inline]
   slab_alloc_node mm/slub.c:2718 [inline]
   kmem_cache_alloc_node+0x1d3/0x280 mm/slub.c:2754
   __alloc_skb+0x10f/0x770 net/core/skbuff.c:219
   alloc_skb include/linux/skbuff.h:932 [inline]
   _sctp_make_chunk+0x3b/0x260 net/sctp/sm_make_chunk.c:1388
   sctp_make_data net/sctp/sm_make_chunk.c:1420 [inline]
   sctp_make_datafrag_empty+0x208/0x360 net/sctp/sm_make_chunk.c:746
   sctp_datamsg_from_user+0x7e8/0x11d0 net/sctp/chunk.c:266
   sctp_sendmsg+0x2611/0x3970 net/sctp/socket.c:1962
   inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
   sock_sendmsg_nosec net/socket.c:633 [inline]
   sock_sendmsg+0xca/0x110 net/socket.c:643
   SYSC_sendto+0x660/0x810 net/socket.c:1685
   SyS_sendto+0x40/0x50 net/socket.c:1653

I am not sure about backporting.  The bug is quite hard to trigger, I've
seen it few times during our massive continuous testing (however, it
could be cause of some other episodic stray crashes as it leads to
memory corruption...).  If it is triggered, the consequences are very
bad -- almost definite bad memory corruption.  The fix is non trivial
and has chances of introducing new bugs.  I am also not sure how
actively people use KASAN on older releases.

[dvyukov@google.com: - sorted includes[
  Link: http://lkml.kernel.org/r/20170309094028.51088-1-dvyukov@google.com
Link: http://lkml.kernel.org/r/20170308151532.5070-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-03-09 17:01:10 -08:00
Dmitry Vyukov
68fd814a33 kasan: resched in quarantine_remove_cache() 
We see reported stalls/lockups in quarantine_remove_cache() on machines
with large amounts of RAM.  quarantine_remove_cache() needs to scan
whole quarantine in order to take out all objects belonging to the
cache.  Quarantine is currently 1/32-th of RAM, e.g.  on a machine with
256GB of memory that will be 8GB.  Moreover quarantine scanning is a
walk over uncached linked list, which is slow.

Add cond_resched() after scanning of each non-empty batch of objects.
Batches are specifically kept of reasonable size for quarantine_put().
On a machine with 256GB of RAM we should have ~512 non-empty batches,
each with 16MB of objects.

Link: http://lkml.kernel.org/r/20170308154239.25440-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-03-09 17:01:10 -08:00
Greg Thelen
f9fa1d919c kasan: drain quarantine of memcg slab objects 
Per memcg slab accounting and kasan have a problem with kmem_cache
destruction.
 - kmem_cache_create() allocates a kmem_cache, which is used for
   allocations from processes running in root (top) memcg.
 - Processes running in non root memcg and allocating with either
   __GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg
   kmem_cache.
 - Kasan catches use-after-free by having kfree() and kmem_cache_free()
   defer freeing of objects. Objects are placed in a quarantine.
 - kmem_cache_destroy() destroys root and non root kmem_caches. It takes
   care to drain the quarantine of objects from the root memcg's
   kmem_cache, but ignores objects associated with non root memcg. This
   causes leaks because quarantined per memcg objects refer to per memcg
   kmem cache being destroyed.

To see the problem:

 1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,)
 2) from non root memcg, allocate and free a few objects from cache
 3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy()
    will trigger a "Slab cache still has objects" warning indicating
    that the per memcg kmem_cache structure was leaked.

Fix the leak by draining kasan quarantined objects allocated from non
root memcg.

Racing memcg deletion is tricky, but handled.  kmem_cache_destroy() =>
shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache()
flushes per memcg quarantined objects, even if that memcg has been
rmdir'd and gone through memcg_deactivate_kmem_caches().

This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is
enabled.  So I don't think it's worth patching stable kernels.

Link: http://lkml.kernel.org/r/1482257462-36948-1-git-send-email-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-02-24 17:46:56 -08:00
Dmitry Vyukov
64abdcb243 kasan: eliminate long stalls during quarantine reduction 
Currently we dedicate 1/32 of RAM for quarantine and then reduce it by
1/4 of total quarantine size.  This can be a significant amount of
memory.  For example, with 4GB of RAM total quarantine size is 128MB and
it is reduced by 32MB at a time.  With 128GB of RAM total quarantine
size is 4GB and it is reduced by 1GB.  This leads to several problems:

 - freeing 1GB can take tens of seconds, causes rcu stall warnings and
   just introduces unexpected long delays at random places
 - if kmalloc() is called under a mutex, other threads stall on that
   mutex while a thread reduces quarantine
 - threads wait on quarantine_lock while one thread grabs a large batch
   of objects to evict
 - we walk the uncached list of object to free twice which makes all of
   the above worse
 - when a thread frees objects, they are already not accounted against
   global_quarantine.bytes; as the result we can have quarantine_size
   bytes in quarantine + unbounded amount of memory in large batches in
   threads that are in process of freeing

Reduce size of quarantine in smaller batches to reduce the delays.  The
only reason to reduce it in batches is amortization of overheads, the
new batch size of 1MB should be well enough to amortize spinlock
lock/unlock and few function calls.

Plus organize quarantine as a FIFO array of batches.  This allows to not
walk the list in quarantine_reduce() under quarantine_lock, which in
turn reduces contention and is just faster.

This improves performance of heavy load (syzkaller fuzzing) by ~20% with
4 CPUs and 32GB of RAM.  Also this eliminates frequent (every 5 sec)
drops of CPU consumption from ~400% to ~100% (one thread reduces
quarantine while others are waiting on a mutex).

Some reference numbers:
1. Machine with 4 CPUs and 4GB of memory. Quarantine size 128MB.
   Currently we free 32MB at at time.
   With new code we free 1MB at a time (1024 batches, ~128 are used).
2. Machine with 32 CPUs and 128GB of memory. Quarantine size 4GB.
   Currently we free 1GB at at time.
   With new code we free 8MB at a time (1024 batches, ~512 are used).
3. Machine with 4096 CPUs and 1TB of memory. Quarantine size 32GB.
   Currently we free 8GB at at time.
   With new code we free 4MB at a time (16K batches, ~8K are used).

Link: http://lkml.kernel.org/r/1478756952-18695-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-12-12 18:55:09 -08:00
Alexander Potapenko
bcbf0d566b kasan: remove the unnecessary WARN_ONCE from quarantine.c 
It's quite unlikely that the user will so little memory that the per-CPU
quarantines won't fit into the given fraction of the available memory.
Even in that case he won't be able to do anything with the information
given in the warning.

Link: http://lkml.kernel.org/r/1470929182-101413-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-08-11 16:58:14 -07:00
Alexander Potapenko
c3cee37228 kasan: avoid overflowing quarantine size on low memory systems 
If the total amount of memory assigned to quarantine is less than the
amount of memory assigned to per-cpu quarantines, |new_quarantine_size|
may overflow.  Instead, set it to zero.

[akpm@linux-foundation.org: cleanup: use WARN_ONCE return value]
Link: http://lkml.kernel.org/r/1470063563-96266-1-git-send-email-glider@google.com
Fixes: 55834c5909 ("mm: kasan: initial memory quarantine implementation")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-08-02 17:31:41 -04:00
Andrey Ryabinin
b3cbd9bf77 mm/kasan: get rid of ->state in struct kasan_alloc_meta 
The state of object currently tracked in two places - shadow memory, and
the ->state field in struct kasan_alloc_meta.  We can get rid of the
latter.  The will save us a little bit of memory.  Also, this allow us
to move free stack into struct kasan_alloc_meta, without increasing
memory consumption.  So now we should always know when the last time the
object was freed.  This may be useful for long delayed use-after-free
bugs.

As a side effect this fixes following UBSAN warning:
	UBSAN: Undefined behaviour in mm/kasan/quarantine.c:102:13
	member access within misaligned address ffff88000d1efebc for type 'struct qlist_node'
	which requires 8 byte alignment

Link: http://lkml.kernel.org/r/1470062715-14077-5-git-send-email-aryabinin@virtuozzo.com
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-08-02 17:31:41 -04:00
Andrey Ryabinin
f7376aed6c mm/kasan, slub: don't disable interrupts when object leaves quarantine 
SLUB doesn't require disabled interrupts to call ___cache_free().

Link: http://lkml.kernel.org/r/1470062715-14077-3-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-08-02 17:31:41 -04:00
Joonsoo Kim
0ab686d8c8 kasan/quarantine: fix bugs on qlist_move_cache() 
There are two bugs on qlist_move_cache().  One is that qlist's tail
isn't set properly.  curr->next can be NULL since it is singly linked
list and NULL value on tail is invalid if there is one item on qlist.
Another one is that if cache is matched, qlist_put() is called and it
will set curr->next to NULL.  It would cause to stop the loop
prematurely.

These problems come from complicated implementation so I'd like to
re-implement it completely.  Implementation in this patch is really
simple.  Iterate all qlist_nodes and put them to appropriate list.

Unfortunately, I got this bug sometime ago and lose oops message.  But,
the bug looks trivial and no need to attach oops.

Fixes: 55834c5909 ("mm: kasan: initial memory quarantine implementation")
Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Kuthonuzo Luruo <poll.stdin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-07-15 14:54:27 +09:00
Alexander Potapenko
55834c5909 mm: kasan: initial memory quarantine implementation 
Quarantine isolates freed objects in a separate queue.  The objects are
returned to the allocator later, which helps to detect use-after-free
errors.

When the object is freed, its state changes from KASAN_STATE_ALLOC to
KASAN_STATE_QUARANTINE.  The object is poisoned and put into quarantine
instead of being returned to the allocator, therefore every subsequent
access to that object triggers a KASAN error, and the error handler is
able to say where the object has been allocated and deallocated.

When it's time for the object to leave quarantine, its state becomes
KASAN_STATE_FREE and it's returned to the allocator.  From now on the
allocator may reuse it for another allocation.  Before that happens,
it's still possible to detect a use-after free on that object (it
retains the allocation/deallocation stacks).

When the allocator reuses this object, the shadow is unpoisoned and old
allocation/deallocation stacks are wiped.  Therefore a use of this
object, even an incorrect one, won't trigger ASan warning.

Without the quarantine, it's not guaranteed that the objects aren't
reused immediately, that's why the probability of catching a
use-after-free is lower than with quarantine in place.

Quarantine isolates freed objects in a separate queue.  The objects are
returned to the allocator later, which helps to detect use-after-free
errors.

Freed objects are first added to per-cpu quarantine queues.  When a
cache is destroyed or memory shrinking is requested, the objects are
moved into the global quarantine queue.  Whenever a kmalloc call allows
memory reclaiming, the oldest objects are popped out of the global queue
until the total size of objects in quarantine is less than 3/4 of the
maximum quarantine size (which is a fraction of installed physical
memory).

As long as an object remains in the quarantine, KASAN is able to report
accesses to it, so the chance of reporting a use-after-free is
increased.  Once the object leaves quarantine, the allocator may reuse
it, in which case the object is unpoisoned and KASAN can't detect
incorrect accesses to it.

Right now quarantine support is only enabled in SLAB allocator.
Unification of KASAN features in SLAB and SLUB will be done later.

This patch is based on the "mm: kasan: quarantine" patch originally
prepared by Dmitry Chernenkov.  A number of improvements have been
suggested by Andrey Ryabinin.

[glider@google.com: v9]
  Link: http://lkml.kernel.org/r/1462987130-144092-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-05-20 17:58:30 -07:00