e1000: Hold RTNL when e1000_down can be called

e1000_down calls netif_queue_set_napi, which assumes that RTNL is held.

There are a few paths for e1000_down to be called in e1000 where RTNL is
not currently being held:
  - e1000_shutdown (pci shutdown)
  - e1000_suspend (power management)
  - e1000_reinit_locked (via e1000_reset_task delayed work)
  - e1000_io_error_detected (via pci error handler)

Hold RTNL in three places to fix this issue:
  - e1000_reset_task: igc, igb, and e100e all hold rtnl in this path.
  - e1000_io_error_detected (pci error handler): e1000e and ixgbe hold
    rtnl in this path. A patch has been posted for igc to do the same
    [1].
  - __e1000_shutdown (which is called from both e1000_shutdown and
    e1000_suspend): igb, ixgbe, and e1000e all hold rtnl in the same
    path.

The other paths which call e1000_down seemingly hold RTNL and are OK:
  - e1000_close (ndo_stop)
  - e1000_change_mtu (ndo_change_mtu)

Based on the above analysis and mailing list discussion [2], I believe
adding rtnl in the three places mentioned above is correct.

Fixes: 8f7ff18a5e ("e1000: Link NAPI instances to queues and IRQs")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Closes: https://lore.kernel.org/netdev/8cf62307-1965-46a0-a411-ff0080090ff9@yandex.ru/
Link: https://lore.kernel.org/netdev/20241022215246.307821-3-jdamato@fastly.com/ [1]
Link: https://lore.kernel.org/netdev/ZxgVRX7Ne-lTjwiJ@LQ3V64L9R2/ [2]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This commit is contained in:
Joe Damato 2024-10-23 17:27:45 +00:00 committed by Tony Nguyen
parent 4d26b6eccd
commit e400c7444d

View File

@ -3509,7 +3509,9 @@ static void e1000_reset_task(struct work_struct *work)
container_of(work, struct e1000_adapter, reset_task);
e_err(drv, "Reset adapter\n");
rtnl_lock();
e1000_reinit_locked(adapter);
rtnl_unlock();
}
/**
@ -5074,7 +5076,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
usleep_range(10000, 20000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
rtnl_lock();
e1000_down(adapter);
rtnl_unlock();
}
status = er32(STATUS);
@ -5235,16 +5239,20 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
rtnl_lock();
netif_device_detach(netdev);
if (state == pci_channel_io_perm_failure)
if (state == pci_channel_io_perm_failure) {
rtnl_unlock();
return PCI_ERS_RESULT_DISCONNECT;
}
if (netif_running(netdev))
e1000_down(adapter);
if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags))
pci_disable_device(pdev);
rtnl_unlock();
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;