bus: sunxi-rsb: Simplify code with dev_err_probe()

Use dev_err_probe() directly in the driver probe phase. This can
simplify the code a bit.

Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240905114134.80310-1-zhangzekun11@huawei.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This commit is contained in:
Zhang Zekun 2024-09-05 19:41:34 +08:00 committed by Chen-Yu Tsai
parent 8400291e28
commit 7ad250e13f

View File

@ -751,12 +751,10 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
int irq, ret;
of_property_read_u32(np, "clock-frequency", &clk_freq);
if (clk_freq > RSB_MAX_FREQ) {
dev_err(dev,
"clock-frequency (%u Hz) is too high (max = 20MHz)\n",
clk_freq);
return -EINVAL;
}
if (clk_freq > RSB_MAX_FREQ)
return dev_err_probe(dev, -EINVAL,
"clock-frequency (%u Hz) is too high (max = 20MHz)\n",
clk_freq);
rsb = devm_kzalloc(dev, sizeof(*rsb), GFP_KERNEL);
if (!rsb)
@ -774,28 +772,22 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
return irq;
rsb->clk = devm_clk_get(dev, NULL);
if (IS_ERR(rsb->clk)) {
ret = PTR_ERR(rsb->clk);
dev_err(dev, "failed to retrieve clk: %d\n", ret);
return ret;
}
if (IS_ERR(rsb->clk))
return dev_err_probe(dev, PTR_ERR(rsb->clk),
"failed to retrieve clk\n");
rsb->rstc = devm_reset_control_get(dev, NULL);
if (IS_ERR(rsb->rstc)) {
ret = PTR_ERR(rsb->rstc);
dev_err(dev, "failed to retrieve reset controller: %d\n", ret);
return ret;
}
if (IS_ERR(rsb->rstc))
return dev_err_probe(dev, PTR_ERR(rsb->rstc),
"failed to retrieve reset controller\n");
init_completion(&rsb->complete);
mutex_init(&rsb->lock);
ret = devm_request_irq(dev, irq, sunxi_rsb_irq, 0, RSB_CTRL_NAME, rsb);
if (ret) {
dev_err(dev, "can't register interrupt handler irq %d: %d\n",
irq, ret);
return ret;
}
if (ret)
return dev_err_probe(dev, ret,
"can't register interrupt handler irq %d\n", irq);
ret = sunxi_rsb_hw_init(rsb);
if (ret)