mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 04:38:03 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support

Browse Source 
usb5744 supports SMBus Configuration and it may be configured via the
SMBus slave interface during the hub start-up configuration stage.

To program it driver uses i2c-bus phandle (added in commit '02be19e914b8
dt-bindings: usb: Add support for Microchip usb5744 hub controller') to
get i2c client device and then based on usb5744 compatible check calls
usb5744 i2c default initialization sequence.

Apart from the USB command attach, prevent the hub from suspend.
when the USB Attach with SMBus (0xAA56) command is issued to the hub,
the hub is getting enumerated and then it puts in a suspend mode.
This causes the hub to NAK any SMBus access made by the SMBus Master
during this period and not able to see the hub's slave address while
running the "i2c probe" command.

Prevent the MCU from putting the HUB in suspend mode through register
write. The BYPASS_UDC_SUSPEND bit (Bit 3) of the RuntimeFlags2
register at address 0x411D controls this aspect of the hub. The
BYPASS_UDC_SUSPEND bit in register 0x411Dh must be set to ensure that the
MCU is always enabled and ready to respond to SMBus runtime commands.
This register needs to be written before the USB attach command is issued.

The byte sequence is as follows:
Slave addr: 0x2d           00 00 05 00 01 41 1D 08
Slave addr: 0x2d           99 37 00
Slave addr: 0x2d           AA 56 00

Also since usb5744 i2c initialization routine uses i2c SMBus APIs invoke
these APIs only when i2c driver is enabled in the kernel configuration.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1725732196-70975-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Radhey Shyam Pandey 2024-09-07 23:33:16 +05:30 committed by Greg Kroah-Hartman
parent 908f61bedb
commit 6782311d04
1 changed files with 77 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

77
drivers/usb/misc/onboard_usb_dev.c
View File

@ -11,6 +11,7 @@
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
@ -29,6 +30,17 @@
#include "onboard_usb_dev.h"
/* USB5744 register offset and mask */
#define USB5744_CMD_ATTACH 0xAA
#define USB5744_CMD_ATTACH_LSB 0x56
#define USB5744_CMD_CREG_ACCESS 0x99
#define USB5744_CMD_CREG_ACCESS_LSB 0x37
#define USB5744_CREG_MEM_ADDR 0x00
#define USB5744_CREG_WRITE 0x00
#define USB5744_CREG_RUNTIMEFLAGS2 0x41
#define USB5744_CREG_RUNTIMEFLAGS2_LSB 0x1D
#define USB5744_CREG_BYPASS_UDC_SUSPEND BIT(3)
static void onboard_dev_attach_usb_driver(struct work_struct *work);
static struct usb_device_driver onboard_dev_usbdev_driver;
@ -297,10 +309,50 @@ static void onboard_dev_attach_usb_driver(struct work_struct *work)
pr_err("Failed to attach USB driver: %pe\n", ERR_PTR(err));
}
static int onboard_dev_5744_i2c_init(struct i2c_client *client)
{
#if IS_ENABLED(CONFIG_I2C)
struct device *dev = &client->dev;
int ret;
/*
* Set BYPASS_UDC_SUSPEND bit to ensure MCU is always enabled
* and ready to respond to SMBus runtime commands.
* The command writes 5 bytes to memory and single data byte in
* configuration register.
*/
char wr_buf[7] = {USB5744_CREG_MEM_ADDR, 5,
USB5744_CREG_WRITE, 1,
USB5744_CREG_RUNTIMEFLAGS2,
USB5744_CREG_RUNTIMEFLAGS2_LSB,
USB5744_CREG_BYPASS_UDC_SUSPEND};
ret = i2c_smbus_write_block_data(client, 0, sizeof(wr_buf), wr_buf);
if (ret)
return dev_err_probe(dev, ret, "BYPASS_UDC_SUSPEND bit configuration failed\n");
ret = i2c_smbus_write_word_data(client, USB5744_CMD_CREG_ACCESS,
USB5744_CMD_CREG_ACCESS_LSB);
if (ret)
return dev_err_probe(dev, ret, "Configuration Register Access Command failed\n");
/* Send SMBus command to boot hub. */
ret = i2c_smbus_write_word_data(client, USB5744_CMD_ATTACH,
USB5744_CMD_ATTACH_LSB);
if (ret < 0)
return dev_err_probe(dev, ret, "USB Attach with SMBus command failed\n");
return ret;
#else
return -ENODEV;
#endif
}
static int onboard_dev_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct onboard_dev *onboard_dev;
struct device_node *i2c_node;
int err;
onboard_dev = devm_kzalloc(dev, sizeof(*onboard_dev), GFP_KERNEL);
@ -340,6 +392,27 @@ static int onboard_dev_probe(struct platform_device *pdev)
if (err)
return err;
i2c_node = of_parse_phandle(pdev->dev.of_node, "i2c-bus", 0);
if (i2c_node) {
struct i2c_client *client;
client = of_find_i2c_device_by_node(i2c_node);
of_node_put(i2c_node);
if (!client) {
err = -EPROBE_DEFER;
goto err_power_off;
}
if (of_device_is_compatible(pdev->dev.of_node, "usb424,2744") ||
of_device_is_compatible(pdev->dev.of_node, "usb424,5744"))
err = onboard_dev_5744_i2c_init(client);
put_device(&client->dev);
if (err < 0)
goto err_power_off;
}
/*
* The USB driver might have been detached from the USB devices by
* onboard_dev_remove() (e.g. through an 'unbind' by userspace),
@ -351,6 +424,10 @@ static int onboard_dev_probe(struct platform_device *pdev)
schedule_work(&attach_usb_driver_work);
return 0;
err_power_off:
onboard_dev_power_off(onboard_dev);
return err;
}
static void onboard_dev_remove(struct platform_device *pdev)