linux/kernel/irq/settings.h

189 lines
4.9 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Internal header to deal with irq_desc->status which will be renamed
* to irq_desc->settings.
*/
enum {
_IRQ_DEFAULT_INIT_FLAGS = IRQ_DEFAULT_INIT_FLAGS,
_IRQ_PER_CPU = IRQ_PER_CPU,
_IRQ_LEVEL = IRQ_LEVEL,
_IRQ_NOPROBE = IRQ_NOPROBE,
_IRQ_NOREQUEST = IRQ_NOREQUEST,
_IRQ_NOTHREAD = IRQ_NOTHREAD,
_IRQ_NOAUTOEN = IRQ_NOAUTOEN,
_IRQ_MOVE_PCNTXT = IRQ_MOVE_PCNTXT,
_IRQ_NO_BALANCING = IRQ_NO_BALANCING,
_IRQ_NESTED_THREAD = IRQ_NESTED_THREAD,
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 16:03:06 +00:00
_IRQ_PER_CPU_DEVID = IRQ_PER_CPU_DEVID,
_IRQ_IS_POLLED = IRQ_IS_POLLED,
_IRQ_DISABLE_UNLAZY = IRQ_DISABLE_UNLAZY,
_IRQ_HIDDEN = IRQ_HIDDEN,
_IRQ_NO_DEBUG = IRQ_NO_DEBUG,
_IRQF_MODIFY_MASK = IRQF_MODIFY_MASK,
};
#define IRQ_PER_CPU GOT_YOU_MORON
#define IRQ_NO_BALANCING GOT_YOU_MORON
#define IRQ_LEVEL GOT_YOU_MORON
#define IRQ_NOPROBE GOT_YOU_MORON
#define IRQ_NOREQUEST GOT_YOU_MORON
#define IRQ_NOTHREAD GOT_YOU_MORON
#define IRQ_NOAUTOEN GOT_YOU_MORON
#define IRQ_NESTED_THREAD GOT_YOU_MORON
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 16:03:06 +00:00
#define IRQ_PER_CPU_DEVID GOT_YOU_MORON
#define IRQ_IS_POLLED GOT_YOU_MORON
#define IRQ_DISABLE_UNLAZY GOT_YOU_MORON
#define IRQ_HIDDEN GOT_YOU_MORON
#define IRQ_NO_DEBUG GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
#define IRQF_MODIFY_MASK GOT_YOU_MORON
static inline void
irq_settings_clr_and_set(struct irq_desc *desc, u32 clr, u32 set)
{
desc->status_use_accessors &= ~(clr & _IRQF_MODIFY_MASK);
desc->status_use_accessors |= (set & _IRQF_MODIFY_MASK);
}
static inline bool irq_settings_is_per_cpu(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_PER_CPU;
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 16:03:06 +00:00
static inline bool irq_settings_is_per_cpu_devid(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_PER_CPU_DEVID;
}
static inline void irq_settings_set_per_cpu(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_PER_CPU;
}
static inline void irq_settings_set_no_balancing(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_NO_BALANCING;
}
static inline bool irq_settings_has_no_balance_set(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_NO_BALANCING;
}
static inline u32 irq_settings_get_trigger_mask(struct irq_desc *desc)
{
return desc->status_use_accessors & IRQ_TYPE_SENSE_MASK;
}
static inline void
irq_settings_set_trigger_mask(struct irq_desc *desc, u32 mask)
{
desc->status_use_accessors &= ~IRQ_TYPE_SENSE_MASK;
desc->status_use_accessors |= mask & IRQ_TYPE_SENSE_MASK;
}
static inline bool irq_settings_is_level(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_LEVEL;
}
static inline void irq_settings_clr_level(struct irq_desc *desc)
{
desc->status_use_accessors &= ~_IRQ_LEVEL;
}
static inline void irq_settings_set_level(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_LEVEL;
}
static inline bool irq_settings_can_request(struct irq_desc *desc)
{
return !(desc->status_use_accessors & _IRQ_NOREQUEST);
}
static inline void irq_settings_clr_norequest(struct irq_desc *desc)
{
desc->status_use_accessors &= ~_IRQ_NOREQUEST;
}
static inline void irq_settings_set_norequest(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_NOREQUEST;
}
static inline bool irq_settings_can_thread(struct irq_desc *desc)
{
return !(desc->status_use_accessors & _IRQ_NOTHREAD);
}
static inline void irq_settings_clr_nothread(struct irq_desc *desc)
{
desc->status_use_accessors &= ~_IRQ_NOTHREAD;
}
static inline void irq_settings_set_nothread(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_NOTHREAD;
}
static inline bool irq_settings_can_probe(struct irq_desc *desc)
{
return !(desc->status_use_accessors & _IRQ_NOPROBE);
}
static inline void irq_settings_clr_noprobe(struct irq_desc *desc)
{
desc->status_use_accessors &= ~_IRQ_NOPROBE;
}
static inline void irq_settings_set_noprobe(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_NOPROBE;
}
static inline bool irq_settings_can_move_pcntxt(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_MOVE_PCNTXT;
}
static inline bool irq_settings_can_autoenable(struct irq_desc *desc)
{
return !(desc->status_use_accessors & _IRQ_NOAUTOEN);
}
static inline bool irq_settings_is_nested_thread(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_NESTED_THREAD;
}
static inline bool irq_settings_is_polled(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_IS_POLLED;
}
static inline bool irq_settings_disable_unlazy(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_DISABLE_UNLAZY;
}
static inline void irq_settings_clr_disable_unlazy(struct irq_desc *desc)
{
desc->status_use_accessors &= ~_IRQ_DISABLE_UNLAZY;
}
static inline bool irq_settings_is_hidden(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_HIDDEN;
}
static inline void irq_settings_set_no_debug(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_NO_DEBUG;
}
static inline bool irq_settings_no_debug(struct irq_desc *desc)
{
return desc->status_use_accessors & _IRQ_NO_DEBUG;
}