mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 04:38:03 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
linux/drivers/iio/imu/Kconfig

115 lines
3.1 KiB
Plaintext
Raw Permalink Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 12:07:45 +00:00
# SPDX-License-Identifier: GPL-2.0-only
iio:imu: Add support for the ADIS16480 and similar IMUs This patch adds support for the ADIS16375, ADIS16480, ADIS16485, ADIS16488 6 degree to 10 degree of freedom IMUs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 13:36:00 +00:00
#
# IIO imu drivers configuration
#
iio: Add a comment to about alphabetical order to Kconfigs and Makefiles Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-15 07:45:00 +00:00
# When adding new entries keep the list in alphabetical order
iio:imu: Add support for the ADIS16480 and similar IMUs This patch adds support for the ADIS16375, ADIS16480, ADIS16485, ADIS16488 6 degree to 10 degree of freedom IMUs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 13:36:00 +00:00
menu "Inertial measurement units"
staging:iio: Move adis16400 out of staging This adis16400 driver is in pretty good shape now, so move it out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-16 12:48:00 +00:00
config ADIS16400
tristate "Analog Devices ADIS16400 and similar IMU SPI driver"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices adis16300, adis16344,
adis16350, adis16354, adis16355, adis16360, adis16362, adis16364,
adis16365, adis16400 and adis16405 triaxial inertial sensors
(adis16400 series also have magnetometers).
iio: imu: Add support for the ADIS16460 IMU The ADIS16460 device is a complete inertial system that includes a triaxial gyroscope and a triaxial accelerometer. It's more simplified design than that of the ADIS16480, and does not offer the triaxial magnetometers & pressure sensors. It does also have a temperature sensor (like the ADIS16480). Since it is part of the ADIS16XXX family, it re-uses parts of the ADIS library. Naturally, the register map is different and much more simplified than the ADIS16480 subfamily, so it cannot be integrated into that driver. A major difference is that the registers are not paged. One thing that is particularly special about it, is that it requires a higher delay between CS changes (i.e. when CS goes up, the spec recommends that it be brought down after a minimum of 16 uS). Other ADIS chips require (via spec) a minimum of 2 uS between CS changes. The kernel's 10 uS default should be fine for those other chips; they haven't been tested with lower CS change delays yet. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16460.pdf Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-23 07:36:39 +00:00
config ADIS16460
tristate "Analog Devices ADIS16460 and similar IMU driver"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices ADIS16460 inertial
sensor.
To compile this driver as a module, choose M here: the module will be
called adis16460.
staging:iio: Move adis16400 out of staging This adis16400 driver is in pretty good shape now, so move it out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-16 12:48:00 +00:00
iio: imu: Add support for adis16475 Support ADIS16475 and similar IMU devices. These devices are a precision, miniature MEMS inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor combines with signal conditioning that optimizes dynamic performance. The driver adds support for the following devices: * adis16470, adis16475, adis16477, adis16465, adis16467, adis16500, adis16505, adis16507. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-13 08:24:44 +00:00
config ADIS16475
tristate "Analog Devices ADIS16475 and similar IMU driver"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say yes here to build support for Analog Devices ADIS16470, ADIS16475,
drivers: iio: imu: Add support for ADIS16501 Add support for ADIS16501 device in already existing ADIS16475 driver. Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com> Link: https://lore.kernel.org/r/20240527142618.275897-3-ramona.bolboaca13@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-05-27 14:26:11 +00:00
ADIS16477, ADIS16465, ADIS16467, ADIS16500, ADIS16501, ADIS16505,
ADIS16507 inertial sensors.
iio: imu: Add support for adis16475 Support ADIS16475 and similar IMU devices. These devices are a precision, miniature MEMS inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor combines with signal conditioning that optimizes dynamic performance. The driver adds support for the following devices: * adis16470, adis16475, adis16477, adis16465, adis16467, adis16500, adis16505, adis16507. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-13 08:24:44 +00:00
To compile this driver as a module, choose M here: the module will be
called adis16475.
iio:imu: Add support for the ADIS16480 and similar IMUs This patch adds support for the ADIS16375, ADIS16480, ADIS16485, ADIS16488 6 degree to 10 degree of freedom IMUs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 13:36:00 +00:00
config ADIS16480
tristate "Analog Devices ADIS16480 and similar IMU driver"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
iio: adis16480: select CONFIG_CRC32 In rare randconfig builds, the missing CRC32 helper causes a link error: ld.lld: error: undefined symbol: crc32_le >>> referenced by usercopy_64.c >>> vmlinux.o:(adis16480_trigger_handler) Fixes: 941f130881fa ("iio: adis16480: support burst read function") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230131094616.130238-1-arnd@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-31 09:46:11 +00:00
select CRC32
iio:imu: Add support for the ADIS16480 and similar IMUs This patch adds support for the ADIS16375, ADIS16480, ADIS16485, ADIS16488 6 degree to 10 degree of freedom IMUs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 13:36:00 +00:00
help
Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
ADIS16485, ADIS16488 inertial sensors.
iio: imu: Add initial support for Bosch BMI160 BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration and angular rate measurement. It also offers a secondary I2C interface for connecting a magnetometer sensor (usually BMM160). Current driver offers support for accelerometer and gyroscope readings via sysfs or via buffer interface using an external trigger (e.g. hrtimer). Data is retrieved from IMU via I2C or SPI interface. Datasheet is at: http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-15 15:06:56 +00:00
source "drivers/iio/imu/bmi160/Kconfig"
iio: imu: Add driver for BMI323 IMU The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for acceleration, angular rate, and temperature. This sensor includes motion-triggered interrupt features, such as a step counter, tap detection, and activity/inactivity interrupt capabilities. The driver supports various functionalities, including data ready, FIFO data handling, and events such as tap detection, step counting, and activity interrupts. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231013034808.8948-3-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-13 03:48:08 +00:00
source "drivers/iio/imu/bmi323/Kconfig"
iio: imu: add Bosch Sensortec BNO055 core driver Add the core driver for the BNO055 IMU from Bosch. This IMU can be connected via both serial and I2C busses; separate patches will add support for them. The driver supports "AMG" (Accelerometer, Magnetometer, Gyroscope) mode, that provides raw data from the said internal sensors, and a couple of "fusion" modes (i.e. the IMU also does calculations in order to provide euler angles, quaternions, linear acceleration and gravity measurements). In fusion modes the AMG data is still available (with some calibration refinements done by the IMU), but certain settings such as low pass filters cut-off frequency and sensors' ranges are fixed, while in AMG mode they can be customized; this is why AMG mode can still be interesting. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Link: https://lore.kernel.org/r/20220907132205.28021-9-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-07 13:21:59 +00:00
source "drivers/iio/imu/bno055/Kconfig"
iio: imu: Add initial support for Bosch BMI160 BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration and angular rate measurement. It also offers a secondary I2C interface for connecting a magnetometer sensor (usually BMM160). Current driver offers support for accelerometer and gyroscope readings via sysfs or via buffer interface using an external trigger (e.g. hrtimer). Data is retrieved from IMU via I2C or SPI interface. Datasheet is at: http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-15 15:06:56 +00:00
iio: imu: Add support for the FXOS8700 IMU FXOS8700CQ is a small, low-power, 3-axis linear accelerometer and 3-axis magnetometer combined into a single package. The device features a selectable I2C or point-to-point SPI serial interface with 14-bit accelerometer and 16-bit magnetometer ADC resolution along with smart-embedded functions. FXOS8700CQ has dynamically selectable accelerationfull-scale ranges of ±2 g/±4 g/±8 g and a fixed magnetic measurement range of ±1200 μT. Output data rates (ODR) from 1.563 Hz to 800 Hz are selectable by the user for each sensor. Interleaved magnetic and acceleration data is available at ODR rates of up to 400 Hz. FXOS8700CQ is available in a plastic QFN package and it is guaranteed to operate over the extended temperature range of –40 °C to +85 °C. TODO: Trigger and IRQ configuration support Datasheet: http://cache.freescale.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf Signed-off-by: Robert Jones <rjones@gateworks.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-14 18:49:21 +00:00
config FXOS8700
tristate
config FXOS8700_I2C
tristate "NXP FXOS8700 I2C driver"
depends on I2C
select FXOS8700
select REGMAP_I2C
help
Say yes here to build support for the NXP FXOS8700 m+g combo
sensor on I2C.
This driver can also be built as a module. If so, the module will be
called fxos8700_i2c.
config FXOS8700_SPI
tristate "NXP FXOS8700 SPI driver"
depends on SPI
select FXOS8700
select REGMAP_SPI
help
Say yes here to build support for the NXP FXOS8700 m+g combo
sensor on SPI.
This driver can also be built as a module. If so, the module will be
called fxos8700_spi.
iio: imu: Add support for Kionix KMX61 sensor Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports raw accel/magn readings together with scale and sampling frequency. This driver uses two IIO devices one for accelerometer and one for magnetometer. Datasheet will be available at: http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61 Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-03 13:31:48 +00:00
config KMX61
tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
depends on I2C
iio: imu: kmx61: Add support for data ready triggers This creates a data ready trigger per IIO device. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-03 13:31:52 +00:00
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
iio: imu: Add support for Kionix KMX61 sensor Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports raw accel/magn readings together with scale and sampling frequency. This driver uses two IIO devices one for accelerometer and one for magnetometer. Datasheet will be available at: http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61 Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-03 13:31:48 +00:00
help
Say Y here if you want to build a driver for Kionix KMX61 6-axis
accelerometer and magnetometer.
To compile this driver as module, choose M here: the module will
be called kmx61.
iio: imu: add Kconfig and Makefile for inv_icm42600 driver Add 3 modules: inv-icm42600, inv-icm42600-i2c, inv-icm42600-spi. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-22 15:37:23 +00:00
source "drivers/iio/imu/inv_icm42600/Kconfig"
iio: imu: mpu6050: Move config entry into IMU menu Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-02 09:34:00 +00:00
source "drivers/iio/imu/inv_mpu6050/Kconfig"
iio: imu: add support to lsm6dsx driver Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/lsm6ds3.pdf http://www.st.com/resource/en/datasheet/lsm6dsm.pdf - continuous mode support - i2c support - spi support - sw fifo mode support - supported devices: lsm6ds3, lsm6dsm Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-10 21:55:18 +00:00
source "drivers/iio/imu/st_lsm6dsx/Kconfig"
iio: st_sensors: Add lsm9ds0 IMU support We can utilize separate drivers for accelerometer and magnetometer, so here is the glue driver to enable LSM9DS0 IMU support. The idea was suggested by Crestez Dan Leonard in [1]. The proposed change was sent as RFC due to race condition concerns, which are indeed possible. In order to amend the initial change, I went further by providing a specific multi-instantiate probe driver that reuses existing accelerometer and magnetometer. [1]: https://lore.kernel.org/patchwork/patch/670353/ Suggested-by: Crestez Dan Leonard <leonard.crestez@intel.com> Cc: mr.lahorde@laposte.net Cc: Matija Podravec <matija_podravec@fastmail.fm> Cc: Sergey Borishchenko <borischenko.sergey@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210414195454.84183-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-14 19:54:53 +00:00
source "drivers/iio/imu/st_lsm9ds0/Kconfig"
iio: imu: mpu6050: Move config entry into IMU menu Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-02 09:34:00 +00:00
iio:imu: Add support for the ADIS16480 and similar IMUs This patch adds support for the ADIS16375, ADIS16480, ADIS16485, ADIS16488 6 degree to 10 degree of freedom IMUs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-20 13:36:00 +00:00
endmenu
staging:iio: Move adis library out of staging Now that the adis library no longer depends on the sw_ring buffer implementation we can move it out of staging. While we are at it also sort the entries in the iio Kconfig and Makefile to be in alphabetical order. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-13 13:28:00 +00:00
config IIO_ADIS_LIB
tristate
help
A set of IO helper functions for the Analog Devices ADIS* device family.
config IIO_ADIS_LIB_BUFFER
bool
select IIO_TRIGGERED_BUFFER
help
A set of buffer helper functions for the Analog Devices ADIS* device
family.
Reference in New Issue Copy Permalink