# Building Node.js
Depending on what platform or features you need, the build process may
differ. After you've built a binary, running the
test suite to confirm that the binary works as intended is a good next step.
If you can reproduce a test failure, search for it in the
[Node.js issue tracker](https://github.com/nodejs/node/issues) or
file a new issue.
## Table of contents
* [Supported platforms](#supported-platforms)
* [Input](#input)
* [Strategy](#strategy)
* [Platform list](#platform-list)
* [Supported toolchains](#supported-toolchains)
* [Official binary platforms and toolchains](#official-binary-platforms-and-toolchains)
* [OpenSSL asm support](#openssl-asm-support)
* [Previous versions of this document](#previous-versions-of-this-document)
* [Building Node.js on supported platforms](#building-nodejs-on-supported-platforms)
* [Prerequisites](#prerequisites)
* [Unix and macOS](#unix-and-macos)
* [Unix prerequisites](#unix-prerequisites)
* [macOS prerequisites](#macos-prerequisites)
* [Building Node.js](#building-nodejs-1)
* [Installing Node.js](#installing-nodejs)
* [Running Tests](#running-tests)
* [Running Coverage](#running-coverage)
* [Building the documentation](#building-the-documentation)
* [Building a debug build](#building-a-debug-build)
* [Building an ASan build](#building-an-asan-build)
* [Speeding up frequent rebuilds when developing](#speeding-up-frequent-rebuilds-when-developing)
* [Troubleshooting Unix and macOS builds](#troubleshooting-unix-and-macos-builds)
* [Windows](#windows)
* [Windows Prerequisites](#windows-prerequisites)
* [Option 1: Manual install](#option-1-manual-install)
* [Option 2: Automated install with WinGet](#option-2-automated-install-with-winget)
* [Option 3: Automated install with Boxstarter](#option-3-automated-install-with-boxstarter)
* [Building Node.js](#building-nodejs-2)
* [Android](#android)
* [`Intl` (ECMA-402) support](#intl-ecma-402-support)
* [Build with full ICU support (all locales supported by ICU)](#build-with-full-icu-support-all-locales-supported-by-icu)
* [Unix/macOS](#unixmacos)
* [Windows](#windows-1)
* [Trimmed: `small-icu` (English only) support](#trimmed-small-icu-english-only-support)
* [Unix/macOS](#unixmacos-1)
* [Windows](#windows-2)
* [Building without Intl support](#building-without-intl-support)
* [Unix/macOS](#unixmacos-2)
* [Windows](#windows-3)
* [Use existing installed ICU (Unix/macOS only)](#use-existing-installed-icu-unixmacos-only)
* [Build with a specific ICU](#build-with-a-specific-icu)
* [Unix/macOS](#unixmacos-3)
* [Windows](#windows-4)
* [Configuring OpenSSL config appname](#configure-openssl-appname)
* [Building Node.js with FIPS-compliant OpenSSL](#building-nodejs-with-fips-compliant-openssl)
* [Building Node.js with external core modules](#building-nodejs-with-external-core-modules)
* [Unix/macOS](#unixmacos-4)
* [Windows](#windows-5)
* [Note for downstream distributors of Node.js](#note-for-downstream-distributors-of-nodejs)
## Supported platforms
This list of supported platforms is current as of the branch/release to
which it belongs.
### Input
Node.js relies on V8 and libuv. We adopt a subset of their supported platforms.
### Strategy
There are three support tiers:
* **Tier 1**: These platforms represent the majority of Node.js users. The
Node.js Build Working Group maintains infrastructure for full test coverage.
Test failures on tier 1 platforms will block releases.
* **Tier 2**: These platforms represent smaller segments of the Node.js user
base. The Node.js Build Working Group maintains infrastructure for full test
coverage. Test failures on tier 2 platforms will block releases.
Infrastructure issues may delay the release of binaries for these platforms.
* **Experimental**: May not compile or test suite may not pass. The core team
does not create releases for these platforms. Test failures on experimental
platforms do not block releases. Contributions to improve support for these
platforms are welcome.
Platforms may move between tiers between major release lines. The table below
will reflect those changes.
### Platform list
Node.js compilation/execution support depends on operating system, architecture,
and libc version. The table below lists the support tier for each supported
combination. A list of [supported compile toolchains](#supported-toolchains) is
also supplied for tier 1 platforms.
**For production applications, run Node.js on supported platforms only.**
Node.js does not support a platform version if a vendor has expired support
for it. In other words, Node.js does not support running on End-of-Life (EoL)
platforms. This is true regardless of entries in the table below.
| Operating System | Architectures | Versions | Support Type | Notes |
| ---------------- | ---------------- | --------------------------------- | ------------ | ------------------------------------ |
| GNU/Linux | x64 | kernel >= 4.18[^1], glibc >= 2.28 | Tier 1 | e.g. Ubuntu 20.04, Debian 10, RHEL 8 |
| GNU/Linux | x64 | kernel >= 3.10, musl >= 1.1.19 | Experimental | e.g. Alpine 3.8 |
| GNU/Linux | x86 | kernel >= 3.10, glibc >= 2.17 | Experimental | Downgraded as of Node.js 10 |
| GNU/Linux | arm64 | kernel >= 4.18[^1], glibc >= 2.28 | Tier 1 | e.g. Ubuntu 20.04, Debian 10, RHEL 8 |
| GNU/Linux | armv7 | kernel >= 4.18[^1], glibc >= 2.28 | Tier 1 | e.g. Ubuntu 22.04, Debian 12 |
| GNU/Linux | armv6 | kernel >= 4.14, glibc >= 2.24 | Experimental | Downgraded as of Node.js 12 |
| GNU/Linux | ppc64le >=power8 | kernel >= 4.18[^1], glibc >= 2.28 | Tier 2 | e.g. Ubuntu 20.04, RHEL 8 |
| GNU/Linux | s390x | kernel >= 4.18[^1], glibc >= 2.28 | Tier 2 | e.g. RHEL 8 |
| GNU/Linux | loong64 | kernel >= 5.19, glibc >= 2.36 | Experimental | |
| Windows | x64 | >= Windows 10/Server 2016 | Tier 1 | [^2],[^3] |
| Windows | arm64 | >= Windows 10 | Tier 2 | |
| macOS | x64 | >= 11.0 | Tier 1 | For notes about compilation see [^4] |
| macOS | arm64 | >= 11.0 | Tier 1 | |
| SmartOS | x64 | >= 18 | Tier 2 | |
| AIX | ppc64be >=power8 | >= 7.2 TL04 | Tier 2 | |
| FreeBSD | x64 | >= 13.2 | Experimental | |
[^1]: Older kernel versions may work. However, official Node.js release
binaries are [built on RHEL 8 systems](#official-binary-platforms-and-toolchains)
with kernel 4.18.
[^2]: On Windows, running Node.js in Windows terminal emulators
like `mintty` requires the usage of [winpty](https://github.com/rprichard/winpty)
for the tty channels to work (e.g. `winpty node.exe script.js`).
In "Git bash" if you call the node shell alias (`node` without the `.exe`
extension), `winpty` is used automatically.
[^3]: The Windows Subsystem for Linux (WSL) is not
supported, but the GNU/Linux build process and binaries should work. The
community will only address issues that reproduce on native GNU/Linux
systems. Issues that only reproduce on WSL should be reported in the
[WSL issue tracker](https://github.com/Microsoft/WSL/issues). Running the
Windows binary (`node.exe`) in WSL will not work without workarounds such as
stdio redirection.
[^4]: Our macOS x64 Binaries are compiled with 11.0 as a target. Xcode 13 is
required to compile.
### Supported toolchains
Depending on the host platform, the selection of toolchains may vary.
| Operating System | Compiler Versions |
| ---------------- | -------------------------------------------------------------- |
| Linux | GCC >= 12.2 |
| Windows | Visual Studio >= 2022 with the Windows 10 SDK on a 64-bit host |
| macOS | Xcode >= 13 (Apple LLVM >= 12) |
### Official binary platforms and toolchains
Binaries at are produced on:
| Binary package | Platform and Toolchain |
| ----------------------- | ------------------------------------------------------------------------------------------------------------- |
| aix-ppc64 | AIX 7.2 TL04 on PPC64BE with GCC 12[^5] |
| darwin-x64 | macOS 11, Xcode 13 with -mmacosx-version-min=11.0 |
| darwin-arm64 (and .pkg) | macOS 11 (arm64), Xcode 13 with -mmacosx-version-min=11.0 |
| linux-arm64 | RHEL 8 with gcc-toolset-12[^6] |
| linux-armv7l | Cross-compiled on RHEL 9 x64 with a [custom GCC toolchain](https://github.com/rvagg/rpi-newer-crosstools)[^7] |
| linux-ppc64le | RHEL 8 with gcc-toolset-12[^6] |
| linux-s390x | RHEL 8 with gcc-toolset-12[^6] |
| linux-x64 | RHEL 8 with gcc-toolset-12[^6] |
| win-arm64 | Windows Server 2022 (x64) with Visual Studio 2022 |
| win-x64 | Windows Server 2022 (x64) with Visual Studio 2022 |
[^5]: Binaries produced on these systems require libstdc++12, available
from the [AIX toolbox][].
[^6]: Binaries produced on these systems are compatible with glibc >= 2.28
and libstdc++ >= 6.0.25 (`GLIBCXX_3.4.25`). These are available on
distributions natively supporting GCC 8.1 or higher, such as Debian 10,
RHEL 8 and Ubuntu 20.04.
[^7]: Binaries produced on these systems are compatible with glibc >= 2.28
and libstdc++ >= 6.0.30 (`GLIBCXX_3.4.30`). These are available on
distributions natively supporting GCC 12.1 or higher, such as Debian 12,
Ubuntu 22.04.
#### OpenSSL asm support
OpenSSL-1.1.1 requires the following assembler version for use of asm
support on x86\_64 and ia32.
For use of AVX-512,
* gas (GNU assembler) version 2.26 or higher
* nasm version 2.11.8 or higher in Windows
AVX-512 is disabled for Skylake-X by OpenSSL-1.1.1.
For use of AVX2,
* gas (GNU assembler) version 2.23 or higher
* Xcode version 5.0 or higher
* llvm version 3.3 or higher
* nasm version 2.10 or higher in Windows
Please refer to for details.
If compiling without one of the above, use `configure` with the
`--openssl-no-asm` flag. Otherwise, `configure` will fail.
### Previous versions of this document
Supported platforms and toolchains change with each major version of Node.js.
This document is only valid for the current major version of Node.js.
Consult previous versions of this document for older versions of Node.js:
* [Node.js 21](https://github.com/nodejs/node/blob/v21.x/BUILDING.md)
* [Node.js 20](https://github.com/nodejs/node/blob/v20.x/BUILDING.md)
* [Node.js 18](https://github.com/nodejs/node/blob/v18.x/BUILDING.md)
## Building Node.js on supported platforms
### Prerequisites
* [A supported version of Python][Python versions] for building and testing.
* Memory: at least 8GB of RAM is typically required when compiling with 4 parallel jobs (e.g: `make -j4`)
### Unix and macOS
#### Unix prerequisites
* `gcc` and `g++` >= 12.2 or newer
* GNU Make 3.81 or newer
* [A supported version of Python][Python versions]
* For test coverage, your Python installation must include pip.
Installation via Linux package manager can be achieved with:
* Ubuntu, Debian: `sudo apt-get install python3 g++ make python3-pip`
* Fedora: `sudo dnf install python3 gcc-c++ make python3-pip`
* CentOS and RHEL: `sudo yum install python3 gcc-c++ make python3-pip`
* OpenSUSE: `sudo zypper install python3 gcc-c++ make python3-pip`
* Arch Linux, Manjaro: `sudo pacman -S python gcc make python-pip`
FreeBSD and OpenBSD users may also need to install `libexecinfo`.
#### macOS prerequisites
* Xcode Command Line Tools >= 13 for macOS
* [A supported version of Python][Python versions]
* For test coverage, your Python installation must include pip.
macOS users can install the `Xcode Command Line Tools` by running
`xcode-select --install`. Alternatively, if you already have the full Xcode
installed, you can find them under the menu `Xcode -> Open Developer Tool ->
More Developer Tools...`. This step will install `clang`, `clang++`, and
`make`.
#### Building Node.js
If the path to your build directory contains a space, the build will likely
fail.
To build Node.js:
```bash
./configure
make -j4
```
We can speed up the builds by using [Ninja](https://ninja-build.org/). For more
information, see
[Building Node.js with Ninja](doc/contributing/building-node-with-ninja.md).
The `-j4` option will cause `make` to run 4 simultaneous compilation jobs which
may reduce build time. For more information, see the
[GNU Make Documentation](https://www.gnu.org/software/make/manual/html_node/Parallel.html).
The above requires that `python` resolves to a supported version of
Python. See [Prerequisites](#prerequisites).
After building, setting up [firewall rules](tools/macos-firewall.sh) can avoid
popups asking to accept incoming network connections when running tests.
Running the following script on macOS will add the firewall rules for the
executable `node` in the `out` directory and the symbolic `node` link in the
project's root directory.
```bash
sudo ./tools/macos-firewall.sh
```
#### Installing Node.js
To install this version of Node.js into a system directory:
```bash
[sudo] make install
```
#### Running tests
To verify the build:
```bash
make test-only
```
At this point, you are ready to make code changes and re-run the tests.
If you are running tests before submitting a pull request, use:
```bash
make -j4 test
```
`make -j4 test` does a full check on the codebase, including running linters and
documentation tests.
To run the linter without running tests, use
`make lint`/`vcbuild lint`. It will lint JavaScript, C++, and Markdown files.
To fix auto fixable JavaScript linting errors, use `make lint-js-fix`.
If you are updating tests and want to run tests in a single test file
(e.g. `test/parallel/test-stream2-transform.js`):
```bash
tools/test.py test/parallel/test-stream2-transform.js
```
You can execute the entire suite of tests for a given subsystem
by providing the name of a subsystem:
```bash
tools/test.py child-process
```
You can also execute the tests in a test suite directory
(such as `test/message`):
```bash
tools/test.py test/message
```
If you want to check the other options, please refer to the help by using
the `--help` option:
```bash
tools/test.py --help
```
> Note: On Windows you should use `python3` executable.
> Example: `python3 tools/test.py test/message`
You can usually run tests directly with node:
```bash
./node test/parallel/test-stream2-transform.js
```
> Info: `./node` points to your local Node.js build.
Remember to recompile with `make -j4` in between test runs if you change code in
the `lib` or `src` directories.
The tests attempt to detect support for IPv6 and exclude IPv6 tests if
appropriate. If your main interface has IPv6 addresses, then your
loopback interface must also have '::1' enabled. For some default installations
on Ubuntu, that does not seem to be the case. To enable '::1' on the
loopback interface on Ubuntu:
```bash
sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0
```
You can use
[node-code-ide-configs](https://github.com/nodejs/node-code-ide-configs)
to run/debug tests if your IDE configs are present.
#### Running coverage
It's good practice to ensure any code you add or change is covered by tests.
You can do so by running the test suite with coverage enabled:
```bash
./configure --coverage
make coverage
```
A detailed coverage report will be written to `coverage/index.html` for
JavaScript coverage and to `coverage/cxxcoverage.html` for C++ coverage.
If you only want to run the JavaScript tests then you do not need to run
the first command (`./configure --coverage`). Run `make coverage-run-js`,
to execute JavaScript tests independently of the C++ test suite:
```bash
make coverage-run-js
```
If you are updating tests and want to collect coverage for a single test file
(e.g. `test/parallel/test-stream2-transform.js`):
```bash
make coverage-clean
NODE_V8_COVERAGE=coverage/tmp tools/test.py test/parallel/test-stream2-transform.js
make coverage-report-js
```
You can collect coverage for the entire suite of tests for a given subsystem
by providing the name of a subsystem:
```bash
make coverage-clean
NODE_V8_COVERAGE=coverage/tmp tools/test.py --mode=release child-process
make coverage-report-js
```
The `make coverage` command downloads some tools to the project root directory.
To clean up after generating the coverage reports:
```bash
make coverage-clean
```
#### Building the documentation
To build the documentation:
This will build Node.js first (if necessary) and then use it to build the docs:
```bash
make doc
```
If you have an existing Node.js build, you can build just the docs with:
```bash
NODE=/path/to/node make doc-only
```
To read the man page:
```bash
man doc/node.1
```
If you prefer to read the full documentation in a browser, run the following.
```bash
make docserve
```
This will spin up a static file server and provide a URL to where you may browse
the documentation locally.
If you're comfortable viewing the documentation using the program your operating
system has associated with the default web browser, run the following.
```bash
make docopen
```
This will open a file URL to a one-page version of all the browsable HTML
documents using the default browser.
```bash
make docclean
```
This will clean previously built doc.
To test if Node.js was built correctly:
```bash
./node -e "console.log('Hello from Node.js ' + process.version)"
```
#### Building a debug build
If you run into an issue where the information provided by the JS stack trace
is not enough, or if you suspect the error happens outside of the JS VM, you
can try to build a debug enabled binary:
```bash
./configure --debug
make -j4
```
`make` with `./configure --debug` generates two binaries, the regular release
one in `out/Release/node` and a debug binary in `out/Debug/node`, only the
release version is actually installed when you run `make install`.
To use the debug build with all the normal dependencies overwrite the release
version in the install directory:
```bash
make install PREFIX=/opt/node-debug/
cp -a -f out/Debug/node /opt/node-debug/node
```
When using the debug binary, core dumps will be generated in case of crashes.
These core dumps are useful for debugging when provided with the
corresponding original debug binary and system information.
Reading the core dump requires `gdb` built on the same platform the core dump
was captured on (i.e. 64-bit `gdb` for `node` built on a 64-bit system, Linux
`gdb` for `node` built on Linux) otherwise you will get errors like
`not in executable format: File format not recognized`.
Example of generating a backtrace from the core dump:
```bash
$ gdb /opt/node-debug/node core.node.8.1535359906
(gdb) backtrace
```
#### Building an ASan build
[ASan](https://github.com/google/sanitizers) can help detect various memory
related bugs. ASan builds are currently only supported on linux.
If you want to check it on Windows or macOS or you want a consistent toolchain
on Linux, you can try [Docker](https://www.docker.com/products/docker-desktop/)
(using an image like `gengjiawen/node-build:2020-02-14`).
The `--debug` is not necessary and will slow down build and testing, but it can
show clear stacktrace if ASan hits an issue.
```bash
./configure --debug --enable-asan && make -j4
make test-only
```
#### Speeding up frequent rebuilds when developing
Tips: The `ccache` utility is widely used and should generally work fine.
If you encounter any difficulties, consider disabling `mold` as a
troubleshooting step.
If you plan to frequently rebuild Node.js, especially if using several
branches, installing `ccache` can help to greatly reduce build
times. Set up with:
On GNU/Linux:
Tips: `mold` can speed up the link process, which can't be cached, you may
need to install the latest version but not the apt version.
```bash
sudo apt install ccache mold # for Debian/Ubuntu, included in most Linux distros
export CC="ccache gcc" # add to your .profile
export CXX="ccache g++" # add to your .profile
export LDFLAGS="-fuse-ld=mold" # add to your .profile
```
Refs:
1.
2.
On macOS:
```bash
brew install ccache # see https://brew.sh
export CC="ccache cc" # add to ~/.zshrc or other shell config file
export CXX="ccache c++" # add to ~/.zshrc or other shell config file
```
This will allow for near-instantaneous rebuilds when switching branches back
and forth that were built with cache.
When modifying only the JS layer in `lib`, it is possible to externally load it
without modifying the executable:
```bash
./configure --node-builtin-modules-path "$(pwd)"
```
The resulting binary won't include any JS files and will try to load them from
the specified directory. The JS debugger of Visual Studio Code supports this
configuration since the November 2020 version and allows for setting
breakpoints.
#### Troubleshooting Unix and macOS builds
Stale builds can sometimes result in `file not found` errors while building.
This and some other problems can be resolved with `make distclean`. The
`distclean` recipe aggressively removes build artifacts. You will need to
build again (`make -j4`). Since all build artifacts have been removed, this
rebuild may take a lot more time than previous builds. Additionally,
`distclean` removes the file that stores the results of `./configure`. If you
ran `./configure` with non-default options (such as `--debug`), you will need
to run it again before invoking `make -j4`.
If you received the error `nodejs g++ fatal error compilation terminated cc1plus`
during compilation, this is likely a memory issue and you should either provide
more RAM or create swap space to accommodate toolchain requirements or reduce
the number of parallel build tasks (`-j`).
### Windows
#### Tips
You may need disable vcpkg integration if you got link error about symbol
redefine related to zlib.lib(zlib1.dll), even you never install it by hand,
as vcpkg is part of CLion and Visual Studio now.
```powershell
# find your vcpkg
# double check vcpkg install the related file
vcpkg owns zlib.lib
vcpkg owns zlib1.dll
vcpkg integrate remove
```
Refs:
1.
2. /
3. [vcpkg](https://github.com/microsoft/vcpkg/)
#### Windows Prerequisites
##### Option 1: Manual install
* The current [version of Python][Python versions] from the
[Microsoft Store](https://apps.microsoft.com/store/search?publisher=Python+Software+Foundation)
* The "Desktop development with C++" workload from
[Visual Studio 2022 (17.6 or newer)](https://visualstudio.microsoft.com/downloads/)
or the "C++ build tools" workload from the
[Build Tools](https://aka.ms/vs/17/release/vs_buildtools.exe),
with the default optional components
* Basic Unix tools required for some tests,
[Git for Windows](https://git-scm.com/download/win) includes Git Bash
and tools which can be included in the global `PATH`.
* The [NetWide Assembler](https://www.nasm.us/), for OpenSSL assembler modules.
If not installed in the default location, it needs to be manually added
to `PATH`. A build with the `openssl-no-asm` option does not need this, nor
does a build targeting ARM64 Windows.
Optional requirements to build the MSI installer package:
* The .NET SDK component from [Visual Studio 2022](https://visualstudio.microsoft.com/downloads/)
* This component can be installed via the Visual Studio Installer Application
Optional requirements for compiling for Windows on ARM (ARM64):
* Visual Studio 17.6.0 or newer
> **Note:** There is [a bug](https://github.com/nodejs/build/issues/3739) in `17.10.x`
> preventing Node.js from compiling.
* Visual Studio optional components
* Visual C++ compilers and libraries for ARM64
* Visual C++ ATL for ARM64
* Windows 10 SDK 10.0.17763.0 or newer
Optional requirements for compiling with ClangCL:
* Visual Studio optional components
* C++ Clang Compiler for Windows
* MSBuild support for LLVM toolset
NOTE: Currently we only support compiling with Clang that comes from Visual Studio.
##### Option 2: Automated install with WinGet
[WinGet configuration files](https://github.com/nodejs/node/tree/main/.configurations)
can be used to install all the required prerequisites for Node.js development
easily. These files will install the following
[WinGet](https://learn.microsoft.com/en-us/windows/package-manager/winget/) packages:
* Git for Windows with the `git` and Unix tools added to the `PATH`
* `Python 3.12`
* `Visual Studio 2022` (Community, Enterprise or Professional)
* `Visual Studio 2022 Build Tools` with Visual C++ workload, Clang and ClangToolset
* `NetWide Assembler`
To install Node.js prerequisites from Powershell Terminal:
```powershell
winget configure .\configuration.dsc.yaml
```
Alternatively, you can use [Dev Home](https://learn.microsoft.com/en-us/windows/dev-home/)
to install the prerequisites:
* Switch to `Machine Configuration` tab
* Click on `Configuration File`
* Choose the corresponding WinGet configuration file
* Click on `Set up as admin`
##### Option 3: Automated install with Boxstarter
A [Boxstarter](https://boxstarter.org/) script can be used for easy setup of
Windows systems with all the required prerequisites for Node.js development.
This script will install the following [Chocolatey](https://chocolatey.org/)
packages:
* [Git for Windows](https://chocolatey.org/packages/git) with the `git` and
Unix tools added to the `PATH`
* [Python 3.x](https://chocolatey.org/packages/python)
* [Visual Studio 2022 Build Tools](https://chocolatey.org/packages/visualstudio2022buildtools)
with [Visual C++ workload](https://chocolatey.org/packages/visualstudio2022-workload-vctools)
* [NetWide Assembler](https://chocolatey.org/packages/nasm)
To install Node.js prerequisites using
[Boxstarter WebLauncher](https://boxstarter.org/weblauncher), visit
with a supported browser.
Alternatively, you can use PowerShell. Run those commands from
an elevated (Administrator) PowerShell terminal:
```powershell
Set-ExecutionPolicy Unrestricted -Force
iex ((New-Object System.Net.WebClient).DownloadString('https://boxstarter.org/bootstrapper.ps1'))
get-boxstarter -Force
Install-BoxstarterPackage https://raw.githubusercontent.com/nodejs/node/HEAD/tools/bootstrap/windows_boxstarter -DisableReboots
refreshenv
```
The entire installation using Boxstarter will take up approximately 10 GB of
disk space.
#### Building Node.js
* Remember to first clone the Node.js repository with the Git command
and head to the directory that Git created; If you haven't already
```powershell
git clone https://github.com/nodejs/node.git
cd node
```
> \[!TIP]
> If you are building from a Windows machine, symlinks are disabled by default, and can be enabled by cloning
> with the `-c core.symlinks=true` flag.
>
> ```powershell
> git clone -c core.symlinks=true
> ```
* If the path to your build directory contains a space or a non-ASCII character,
the build will likely fail
To start the build process:
```powershell
.\vcbuild
```
To run the tests:
```powershell
.\vcbuild test
```
To test if Node.js was built correctly:
```powershell
Release\node -e "console.log('Hello from Node.js', process.version)"
```
### Android
Android is not a supported platform. Patches to improve the Android build are
welcome. There is no testing on Android in the current continuous integration
environment. The participation of people dedicated and determined to improve
Android building, testing, and support is encouraged.
Be sure you have downloaded and extracted
[Android NDK](https://developer.android.com/ndk) before in
a folder. Then run:
```bash
./android-configure
make -j4
```
The Android SDK version should be at least 24 (Android 7.0) and the target
architecture supports \[arm, arm64/aarch64, x86, x86\_64].
## `Intl` (ECMA-402) support
[Intl](doc/api/intl.md) support is
enabled by default.
### Build with full ICU support (all locales supported by ICU)
This is the default option.
#### Unix/macOS
```bash
./configure --with-intl=full-icu
```
#### Windows
```powershell
.\vcbuild full-icu
```
### Trimmed: `small-icu` (English only) support
In this configuration, only English data is included, but
the full `Intl` (ECMA-402) APIs. It does not need to download
any dependencies to function. You can add full data at runtime.
#### Unix/macOS
```bash
./configure --with-intl=small-icu
```
#### Windows
```powershell
.\vcbuild small-icu
```
### Building without Intl support
The `Intl` object will not be available, nor some other APIs such as
`String.normalize`.
#### Unix/macOS
```bash
./configure --without-intl
```
#### Windows
```powershell
.\vcbuild without-intl
```
### Use existing installed ICU (Unix/macOS only)
```bash
pkg-config --modversion icu-i18n && ./configure --with-intl=system-icu
```
If you are cross-compiling, your `pkg-config` must be able to supply a path
that works for both your host and target environments.
### Build with a specific ICU
You can find other ICU releases at
[the ICU homepage](https://icu.unicode.org/download).
Download the file named something like `icu4c-**##.#**-src.tgz` (or
`.zip`).
To check the minimum recommended ICU, run `./configure --help` and see
the help for the `--with-icu-source` option. A warning will be printed
during configuration if the ICU version is too old.
#### Unix/macOS
From an already-unpacked ICU:
```bash
./configure --with-intl=[small-icu,full-icu] --with-icu-source=/path/to/icu
```
From a local ICU tarball:
```bash
./configure --with-intl=[small-icu,full-icu] --with-icu-source=/path/to/icu.tgz
```
From a tarball URL:
```bash
./configure --with-intl=full-icu --with-icu-source=http://url/to/icu.tgz
```
#### Windows
First unpack latest ICU to `deps/icu`
[icu4c-**##.#**-src.tgz](https://icu.unicode.org/download) (or `.zip`)
as `deps/icu` (You'll have: `deps/icu/source/...`)
```powershell
.\vcbuild full-icu
```
### Configure OpenSSL appname
Node.js can use an OpenSSL configuration file by specifying the environment
variable `OPENSSL_CONF`, or using the command line option `--openssl-conf`, and
if none of those are specified will default to reading the default OpenSSL
configuration file `openssl.cnf`. Node.js will only read a section that is by
default named `nodejs_conf`, but this name can be overridden using the following
configure option:
```bash
./configure --openssl-conf-name=
```
## Building Node.js with FIPS-compliant OpenSSL
Node.js supports FIPS when statically or dynamically linked with OpenSSL 3 via
[OpenSSL's provider model](https://docs.openssl.org/3.0/man7/crypto/#OPENSSL-PROVIDERS).
It is not necessary to rebuild Node.js to enable support for FIPS.
See [FIPS mode](doc/api/crypto.md#fips-mode) for more information on how to
enable FIPS support in Node.js.
## Building Node.js with external core modules
It is possible to specify one or more JavaScript text files to be bundled in
the binary as built-in modules when building Node.js.
### Unix/macOS
This command will make `/root/myModule.js` available via
`require('/root/myModule')` and `./myModule2.js` available via
`require('myModule2')`.
```bash
./configure --link-module '/root/myModule.js' --link-module './myModule2.js'
```
### Windows
To make `./myModule.js` available via `require('myModule')` and
`./myModule2.js` available via `require('myModule2')`:
```powershell
.\vcbuild link-module './myModule.js' link-module './myModule2.js'
```
## Building to use shared dependencies at runtime
By default Node.js is built so that all dependencies are bundled into
the Node.js binary itself. This provides a single binary that includes
the correct versions of all dependencies on which it depends.
Some Node.js distributions, however, prefer to manage dependencies.
A number of `configure` options are provided to support this use case.
* For dependencies with native code, the first set of options allow
Node.js to be built so that it uses a shared library
at runtime instead of building and including the dependency
in the Node.js binary itself. These options are in the
`Shared libraries` section of the `configure` help
(run `./configure --help` to get the complete list).
They provide the ability to enable the use of a shared library,
to set the name of the shared library, and to set the paths that
contain the include and shared library files.
* For dependencies with JavaScript code (including WASM), the second
set of options allow the Node.js binary to be built so that it loads
the JavaScript for dependencies at runtime instead of being built into
the Node.js binary itself. These options are in the `Shared builtins`
section of the `configure` help
(run `./configure --help` to get the complete list). They
provide the ability to set the path to an external JavaScript file
for the dependency to be used at runtime.
It is the responsibility of any distribution
shipping with these options to:
* ensure that the shared dependencies available at runtime
match what is expected by the Node.js binary. A
mismatch may result in crashes or unexpected behavior.
* fully test that Node.js operates as expected with the
external dependencies. There may be little or no test coverage
within the Node.js project CI for these non-default options.
## Note for downstream distributors of Node.js
The Node.js ecosystem is reliant on ABI compatibility within a major release.
To maintain ABI compatibility it is required that distributed builds of Node.js
be built against the same version of dependencies, or similar versions that do
not break their ABI compatibility, as those released by Node.js for any given
`NODE_MODULE_VERSION` (located in `src/node_version.h`).
When Node.js is built (with an intention to distribute) with an ABI
incompatible with the official Node.js builds (e.g. using a ABI incompatible
version of a dependency), please reserve and use a custom `NODE_MODULE_VERSION`
by opening a pull request against the registry available at
.
[AIX toolbox]: https://www.ibm.com/support/pages/aix-toolbox-open-source-software-overview
[Python versions]: https://devguide.python.org/versions/