Use `zlib.bytesWritten` instead.
PR-URL: https://github.com/nodejs/node/pull/55020
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/54698
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Gerhard Stöbich <deb2001-github@yahoo.de>
Reviewed-By: James M Snell <jasnell@gmail.com>
This patch exposes the crc32() function from zlib to user-land.
It computes a 32-bit Cyclic Redundancy Check checksum of `data`. If
`value` is specified, it is used as the starting value of the checksum,
otherwise, 0 is used as the starting value.
```js
const zlib = require('node:zlib');
const { Buffer } = require('node:buffer');
let crc = zlib.crc32('hello'); // 907060870
crc = zlib.crc32('world', crc); // 4192936109
crc = zlib.crc32(Buffer.from('hello')); // 907060870
crc = zlib.crc32(Buffer.from('world'), crc); // 4192936109
```
PR-URL: https://github.com/nodejs/node/pull/52692
Reviewed-By: Yagiz Nizipli <yagiz.nizipli@sentry.io>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
There are a few places in lib where `new Error()` is called and then
additional properties are attached in various ways. This creates a
utility function to generate the errors.
PR-URL: https://github.com/nodejs/node/pull/41879
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
PR-URL: https://github.com/nodejs/node/pull/39492
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Zeyu Yang <himself65@outlook.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/38608
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Zijian Liu <lxxyxzj@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
add validateFunction and refactor to use validateFunction
PR-URL: https://github.com/nodejs/node/pull/37045
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Darshan Sen <raisinten@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/36722
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Pooja D P <Pooja.D.P@ibm.com>
PR-URL: https://github.com/nodejs/node/pull/36718
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Pooja D P <Pooja.D.P@ibm.com>
PR-URL: https://github.com/nodejs/node/pull/36618
Reviewed-By: Robert Nagy <ronagy@icloud.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Due to compat reasons Transform streams don't always wait
for flush to complete before finishing the stream.
Try to wait when possible, i.e. when the user does not
override _final.
Fixes: https://github.com/nodejs/node/issues/34274
PR-URL: https://github.com/nodejs/node/pull/34314
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Zeyu Yang <himself65@outlook.com>
PR-URL: https://github.com/nodejs/node/pull/34072
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
It's also handled in C++ land now, per the previous commit, but
intercepting it in JS land makes for prettier error messages.
PR-URL: https://github.com/nodejs/node/pull/33045
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gerhard Stöbich <deb2001-github@yahoo.de>
Reviewed-By: David Carlier <devnexen@gmail.com>
- Ensure automatic destruction only happens after both
'end' and 'finish' has been emitted through autoDestroy.
- Ensure close() callback is always invoked.
- Ensure 'error' is only emitted once.
PR-URL: https://github.com/nodejs/node/pull/32220
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/31051
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Call the callback for writes that occur after the stream is closed.
This also requires changes to the code to not call `.destroy()`
on the stream in `.on('end')`, and to ignore chunks written
afterwards.
Previously, these writes would just queue up silently, as their
`_write()` callback would never have been called.
Fixes: https://github.com/nodejs/node/issues/30976
PR-URL: https://github.com/nodejs/node/pull/31082
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Store all primordials as properties of the primordials object.
Static functions are prefixed by the constructor's name and prototype
methods are prefixed by the constructor's name followed by "Prototype".
For example: primordials.Object.keys becomes primordials.ObjectKeys.
PR-URL: https://github.com/nodejs/node/pull/30610
Refs: https://github.com/nodejs/node/issues/29766
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
This is an approach to address the issue linked below. Previously,
when `.write()` and `.flush()` calls to a zlib stream were interleaved
synchronously (i.e. without waiting for these operations to finish),
multiple flush calls would have been coalesced into a single flushing
operation.
This patch changes behaviour so that each `.flush()` all corresponds
to one flushing operation on the underlying zlib resource, and the
order of operations is as if the `.flush()` call were a `.write()`
call.
One test had to be removed because it specifically tested the previous
behaviour.
As a drive-by fix, this also makes sure that all flush callbacks are
called. Previously, that was not the case.
Fixes: https://github.com/nodejs/node/issues/28478
PR-URL: https://github.com/nodejs/node/pull/28520
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Use the "no-restricted-globals" ESLint rule to lint for it.
PR-URL: https://github.com/nodejs/node/pull/27027
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
When using `Errors.captureStackFrames` the error's stack property
is set again. This adds a helper function that wraps this functionality
in a simple API that does not only set the stack including the `code`
property but it also improves the performance to create the error.
The helper works for thrown errors and errors returned from wrapped
functions in case they are Node.js core errors.
PR-URL: https://github.com/nodejs/node/pull/26738
Fixes: https://github.com/nodejs/node/issues/26669
Fixes: https://github.com/nodejs/node/issues/20253
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
